From: Ryder Lee
Add display subsystem related device nodes for MT7623.
Cc: CK Hu
Signed-off-by: chunhui dai
Signed-off-by: Bibby Hsieh
Signed-off-by: Ryder Lee
Signed-off-by: Frank Wunderlich
Tested-by: Frank Wunderlich
---
arch/arm/boot/dts/mt7623.dtsi | 177 +
drm_atomic_get_plane_state() can return errors, so we need to handle
these.
Signed-off-by: Paul Cercueil
---
drivers/gpu/drm/ingenic/ingenic-drm-drv.c | 7 +++
1 file changed, 7 insertions(+)
diff --git a/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
b/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
From: Kevin Tang
DPU (Display Processor Unit) is the Display Controller for the Unisoc SoCs
which transfers the image data from a video memory buffer to an internal
LCD interface.
Cc: Orson Zhai
Cc: Chunyan Zhang
Signed-off-by: Kevin Tang
---
.../devicetree/bindings/display/sprd/dpu.yaml
Currently `struct drm_buf_desc` is defined as follows:
struct drm_buf_desc {
int count;
int size;
int low_mark;
int high_mark;
enum {
_DRM_PAGE_ALIGN = 0x01,
_DRM_AGP_BUFFER = 0x02,
_DRM_SG_BUFFER = 0x04,
fixed the following warning:
hibmc_drm_drv.c:296:1-18:WARNING: Assignment of 0/1 to bool variable.
hibmc_drm_drv.c:301:2-19: WARNING: Assignment of 0/1 to bool variable.
v2:
using the pci_dev.msi_enabled instead of priv->msi_enabled.
v3:
just call pci_enable_msi() and pci_disable_msi(), it's no n
From: Kevin Tang
ChangeList:
v1:
1. only upstream modeset and atomic at first commit.
2. remove some unused code;
3. use alpha and blend_mode properties;
3. add yaml support;
4. remove auto-adaptive panel driver;
5. bugfix
v2:
1. add sprd crtc and plane module for KMS, preparing for multi crtc&
From: Kevin Tang
Adds DPU(Display Processor Unit) support for the Unisoc's display subsystem.
It's support multi planes, scaler, rotation, PQ(Picture Quality) and more.
RFC v6:
- Access registers via readl/writel
- Checking for unsupported KMS properties (format, rotation, blend_mode, etc)
On Fri, Jul 17, 2020 at 03:37:42PM +0200, Hans de Goede wrote:
> In the not-enabled -> enabled path pwm_lpss_apply() needs to get a
> runtime-pm reference; and then on any errors it needs to release it
> again.
>
> This leads to somewhat hard to read code. This commit introduces a new
> pwm_lpss_p
From: Kevin Tang
Adds MIPI DSI Master and MIPI DSI-PHY (D-PHY)
support for Unisoc's display subsystem.
Cc: Orson Zhai
Cc: Chunyan Zhang
Signed-off-by: Kevin Tang
---
.../devicetree/bindings/display/sprd/dphy.yaml | 75 +
.../devicetree/bindings/display/sprd/dsi.yaml
From: Kevin Tang
The Unisoc DRM master device is a virtual device needed to list all
DPU devices or other display interface nodes that comprise the
graphics subsystem
Cc: Orson Zhai
Cc: Chunyan Zhang
Signed-off-by: Kevin Tang
---
.../devicetree/bindings/display/sprd/drm.yaml | 36 ++
Add DT bindings for Powertip PH800480T013 800x480 parallel LCD,
this one is used in the Raspberry Pi 7" touchscreen display unit.
Signed-off-by: Marek Vasut
To: dri-devel@lists.freedesktop.org
Cc: Eric Anholt
Cc: Rob Herring
Cc: Sam Ravnborg
Cc: devicet...@vger.kernel.org
---
V2: Add the bindi
From: Kevin Tang
Adds dsi host controller support for the Unisoc's display subsystem.
Adds dsi phy support for the Unisoc's display subsystem.
Only MIPI DSI Displays supported, DP/TV/HMDI will be support
in the feature.
Cc: Orson Zhai
Cc: Chunyan Zhang
Signed-off-by: Kevin Tang
---
drivers/g
On 28/07/2020 17:59, Roger Pau Monné wrote:
> On Tue, Jul 28, 2020 at 05:48:23PM +0100, Julien Grall wrote:
>> Hi,
>>
>> On 27/07/2020 10:13, Roger Pau Monne wrote:
>>> To be used in order to create foreign mappings. This is based on the
>>> ZONE_DEVICE facility which is used by persistent memory d
Hi Roger,
On 28/07/2020 17:59, Roger Pau Monné wrote:
On Tue, Jul 28, 2020 at 05:48:23PM +0100, Julien Grall wrote:
Hi,
On 27/07/2020 10:13, Roger Pau Monne wrote:
To be used in order to create foreign mappings. This is based on the
ZONE_DEVICE facility which is used by persistent memory devi
From: chunhui dai
- disable tmds on phy on mt2701
- support other resolutions like 1280x1024
without this Patch i see flickering on my TFT (1280x1024),
so i guess clock is wrong.
Signed-off-by: chunhui dai
Signed-off-by: Frank Wunderlich
Tested-by: Frank Wunderlich
---
drivers/gpu/drm/media
Add support for Powertip PH800480T013 800x480 parallel LCD, this
one is used in the Raspberry Pi 7" touchscreen display unit.
Signed-off-by: Marek Vasut
To: dri-devel@lists.freedesktop.org
Cc: Eric Anholt
Cc: Rob Herring
Cc: Sam Ravnborg
Cc: devicet...@vger.kernel.org
---
V2: Add bus_flags and
On Tue, Jul 28, 2020 at 06:06:25PM +0100, Andrew Cooper wrote:
> On 28/07/2020 17:59, Roger Pau Monné wrote:
> > On Tue, Jul 28, 2020 at 05:48:23PM +0100, Julien Grall wrote:
> >> Hi,
> >>
> >> On 27/07/2020 10:13, Roger Pau Monne wrote:
> >>> To be used in order to create foreign mappings. This is
Hi,
On 27/07/2020 10:13, Roger Pau Monne wrote:
To be used in order to create foreign mappings. This is based on the
ZONE_DEVICE facility which is used by persistent memory devices in
order to create struct pages and kernel virtual mappings for the IOMEM
areas of such devices. Note that on kerne
From: Stu Hsieh
Test: build pass and run ok
Signed-off-by: Stu Hsieh
---
drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c | 42 +
drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h | 2 +
2 files changed, 44 insertions(+)
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
b/dr
From: Kevin Tang
Adds drm support for the Unisoc's display subsystem.
This is drm kms driver, this driver provides support for the
application framework in Android, Yocto and more.
Application framework can access Unisoc's display internel
peripherals through libdrm or libkms, it's test ok by m
From: Peilin Ye
> Sent: 28 July 2020 12:52
> Currently `struct drm_buf_desc` is defined as follows:
>
> struct drm_buf_desc {
> int count;
> int size;
> int low_mark;
> int high_mark;
> enum {
> _DRM_PAGE_ALIGN = 0x01,
> _DRM_AGP_BUFFER = 0
Dear Linux folks,
Am 25.07.20 um 07:20 schrieb Mazin Rezk:
On Saturday, July 25, 2020 12:59 AM, Duncan wrote:
On Sat, 25 Jul 2020 03:03:52 + Mazin Rezk wrote:
Am 24.07.20 um 19:33 schrieb Kees Cook:
There was a fix to disable the async path for this driver that
worked around the bug t
Hi Emil,
Sorry, I left for a long time because of other things. Now i'm back~
V6 fix access registers via readl/writel, check unsupported KMS
properties (format, rotation, blend mode, etc) by plane_check callback
ops
and remove always true checks for dpu core ops
Add changelog within the correspo
From: Bibby Hsieh
We can select output component by decive node port.
Main path default output component is DSI.
External path default output component is DPI.
without this Patch i get this warning:
WARNING: CPU: 3 PID: 70 at drivers/gpu/drm/drm_mode_config.c:621
drm_mode_config_validate+0x1d8
Validate modes in the drm_crtc_helper_funcs.mode_valid() callback, which
is designed for this purpose, instead of doing it in
drm_crtc_helper_funcs.atomic_check().
Signed-off-by: Paul Cercueil
---
drivers/gpu/drm/ingenic/ingenic-drm-drv.c | 34 +--
1 file changed, 20 insertio
On Fri, Jul 17, 2020 at 03:37:43PM +0200, Hans de Goede wrote:
> Before this commit a suspend + resume of the LPSS PWM controller
> would result in the controller being reset to its defaults of
> output-freq = clock/256, duty-cycle=100%, until someone changes
> to the output-freq and/or duty-cycle
Unlike we previously thought, the per-pixel alpha is just as broken on the
A20 as it is on the A10. Remove the quirk that says we can use it.
Cc: Paul Kocialkowski
Fixes: dcf496a6a608 ("drm/sun4i: sun4i: Introduce a quirk for lowest plane
alpha support")
Signed-off-by: Maxime Ripard
---
driver
Unlike what we previously thought, only the per-pixel alpha is broken on
the lowest plane and the per-plane alpha isn't. Remove the check on the
alpha property being set on the lowest plane to reject a mode.
Cc: Paul Kocialkowski
Fixes: dcf496a6a608 ("drm/sun4i: sun4i: Introduce a quirk for lowes
On Tue, Jul 28, 2020 at 12:35:17PM +, David Laight wrote:
> From: Peilin Ye
> > Sent: 28 July 2020 12:52
> > Currently `struct drm_buf_desc` is defined as follows:
> >
> > struct drm_buf_desc {
> > int count;
> > int size;
> > int low_mark;
> > int high_mark;
> > enum {
> >
From: Jitao Shi
[Detail]
dpi/dsi get the possible_crtc by
mtk_drm_find_possible_crtc_by_comp(*drm_dev, ddp_comp)
Test: build pass and boot to logo
Signed-off-by: Jitao Shi
---
drivers/gpu/drm/mediatek/mtk_dpi.c | 3 ++-
drivers/gpu/drm/mediatek/mtk_dsi.c | 3 ++-
2 files changed, 4 insertions
On Tue, Jul 28, 2020 at 10:11:09AM +0200, Arnd Bergmann wrote:
> On Tue, Jul 28, 2020 at 3:45 AM Peilin Ye wrote:
> >
> > copy_one_buf() is copying uninitialized stack memory to userspace due to
> > the compiler not initializing holes in statically allocated structures.
> > Fix it by initializing
On Tue, Jul 28, 2020 at 05:48:23PM +0100, Julien Grall wrote:
> Hi,
>
> On 27/07/2020 10:13, Roger Pau Monne wrote:
> > To be used in order to create foreign mappings. This is based on the
> > ZONE_DEVICE facility which is used by persistent memory devices in
> > order to create struct pages and k
The Powertip Tech. Corp. is an LCD panel manufacturer.
Signed-off-by: Marek Vasut
To: dri-devel@lists.freedesktop.org
Cc: Eric Anholt
Cc: Rob Herring
Cc: Sam Ravnborg
Cc: devicet...@vger.kernel.org
---
V2: No change
---
Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
1 file cha
On Tue, Jul 28, 2020 at 06:12:46PM +0100, Julien Grall wrote:
> Hi Roger,
>
> On 28/07/2020 17:59, Roger Pau Monné wrote:
> > On Tue, Jul 28, 2020 at 05:48:23PM +0100, Julien Grall wrote:
> > > Hi,
> > >
> > > On 27/07/2020 10:13, Roger Pau Monne wrote:
> > > > To be used in order to create forei
Hi,
On 7/28/20 8:45 PM, Andy Shevchenko wrote:
On Fri, Jul 17, 2020 at 03:37:42PM +0200, Hans de Goede wrote:
In the not-enabled -> enabled path pwm_lpss_apply() needs to get a
runtime-pm reference; and then on any errors it needs to release it
again.
This leads to somewhat hard to read code.
Hi,
On 7/28/20 8:57 PM, Andy Shevchenko wrote:
On Fri, Jul 17, 2020 at 03:37:43PM +0200, Hans de Goede wrote:
Before this commit a suspend + resume of the LPSS PWM controller
would result in the controller being reset to its defaults of
output-freq = clock/256, duty-cycle=100%, until someone ch
Hi,
On 7/28/20 9:36 PM, Andy Shevchenko wrote:
On Fri, Jul 17, 2020 at 03:37:44PM +0200, Hans de Goede wrote:
While looking into adding atomic-pwm support to the pwm-crc driver I
noticed something odd, there is a PWM_BASE_CLK define of 6 MHz and
there is a clock-divider which divides this with
On Wed, 29 Jul 2020 at 02:08, Ruhl, Michael J wrote:
>
> >-Original Message-
> >From: dri-devel On Behalf Of
> >Dave Airlie
> >Sent: Monday, July 27, 2020 11:26 PM
> >To: dri-devel@lists.freedesktop.org
> >Cc: bske...@redhat.com
> >Subject: [PATCH] nouveau: use ttm populate mapping functi
Hi Paul.
On Tue, Jul 28, 2020 at 05:16:39PM +0200, Paul Cercueil wrote:
> Here are a few cleanups to the ingenic-drm driver.
> - some error paths were missing and have been added;
> - the mode validation has been moved to the .mode_valid helper callback.
>
> Cheers,
> -Paul
>
> Paul Cercueil (2)
Hi Kevin
On Tue, Jul 28, 2020 at 06:07:54PM +0800, Kevin Tang wrote:
> From: Kevin Tang
>
> The Unisoc DRM master device is a virtual device needed to list all
> DPU devices or other display interface nodes that comprise the
> graphics subsystem
>
> Cc: Orson Zhai
> Cc: Chunyan Zhang
> Signed
>-Original Message-
>From: Ben Skeggs
>Sent: Tuesday, July 28, 2020 4:16 PM
>To: Ruhl, Michael J
>Cc: Dave Airlie ; dri-devel@lists.freedesktop.org;
>bske...@redhat.com
>Subject: Re: [PATCH] nouveau: use ttm populate mapping functions. (v2)
>
>On Wed, 29 Jul 2020 at 02:08, Ruhl, Michael J
Hi Kevin.
Nice split of the driver.
Some feedback in the following.
Most to bring the driver up-to-date with what have happened since
we saw it last time.
Keeping up with the changes in drm is not always easy.
Sam
On Tue, Jul 28, 2020 at 06:07:55PM +0800, Kevin Tang wrote:
> From: Kevin
Hi Kevin.
On Tue, Jul 28, 2020 at 06:07:56PM +0800, Kevin Tang wrote:
> From: Kevin Tang
>
> DPU (Display Processor Unit) is the Display Controller for the Unisoc SoCs
> which transfers the image data from a video memory buffer to an internal
> LCD interface.
>
> Cc: Orson Zhai
> Cc: Chunyan Z
Hi Kevin.
Some feedback in the following.
I lost track of thing for the atomic modesettting stuff and I hope other
will review that.
Sam
On Tue, Jul 28, 2020 at 06:07:57PM +0800, Kevin Tang wrote:
> From: Kevin Tang
>
> Adds DPU(Display Processor Unit) support for the Unisoc's display
Hi Kevin.
Thanks for submitting this set of drivers.
To better review the pataches can you please give some kind of high
level overview.
An ascii block diagram that identifies all the relevant blocks and how
they relate would be great.
This makes it easier to verify if the right modelling is us
Revamp the way that the flow of data to the display is
defined.
I realized that the hardware supports something like
5 different modes of flow: oneshot, command with TE IRQ,
command with BTA (bus turn around) and TE IRQ, video
with TE IRQ and video without TE IRQ instead synchronizing
to the outpu
The function mcde_display_send_one_frame() has a historical
name that stems from being implemented when the driver
only supported single frame updates.
Rename it mcde_start_flow() so that it reflects the current
usage.
Cc: Stephan Gerhold
Signed-off-by: Linus Walleij
---
drivers/gpu/drm/mcde/m
On Tue, Jul 28, 2020 at 12:08 PM Kevin Tang wrote:
>
> From: Kevin Tang
>
> Adds DPU(Display Processor Unit) support for the Unisoc's display subsystem.
> It's support multi planes, scaler, rotation, PQ(Picture Quality) and more.
>
> RFC v6:
> - Access registers via readl/writel
> - Checking
On Tue, Jul 28, 2020 at 04:16:34PM +, Sidong Yang wrote:
> On Sun, Jul 26, 2020 at 12:26:08PM +0200, Daniel Vetter wrote:
> > On Sat, Jul 25, 2020 at 9:29 PM Melissa Wen wrote:
> > >
> > > On Sat, Jul 25, 2020 at 4:19 PM Melissa Wen wrote:
> > > >
> > > > > No, this very first warning continu
On Tue, Jul 28, 2020 at 01:07:13PM -0400, Kazlauskas, Nicholas wrote:
> On 2020-07-28 5:22 a.m., Paul Menzel wrote:
> > Dear Linux folks,
> >
> >
> > Am 25.07.20 um 07:20 schrieb Mazin Rezk:
> > > On Saturday, July 25, 2020 12:59 AM, Duncan wrote:
> > >
> > > > On Sat, 25 Jul 2020 03:03:52 +
On Tue, Jul 28, 2020 at 10:17:36PM +0200, Sam Ravnborg wrote:
> Hi Paul.
>
> On Tue, Jul 28, 2020 at 05:16:39PM +0200, Paul Cercueil wrote:
> > Here are a few cleanups to the ingenic-drm driver.
> > - some error paths were missing and have been added;
> > - the mode validation has been moved to th
Hi Hyun Kwon,
Are you all sorted with drm-misc commit rights so you can push the 3
(maybe there's more) xlnx fixup patches to drm-misc-next-fixes?
Cheers, Daniel
On Sat, Jul 25, 2020 at 06:34:29AM +, Wei Yongjun wrote:
> Fix typo in parameter description.
>
> Fixes: d76271d22694 ("drm: xlnx
Hi Randy,
(adding a few people to the CC list to discuss the proposed solution
below)
Thanks for the report.
On Mon, Jul 27, 2020 at 05:49:41PM -0700, Randy Dunlap wrote:
> On 7/27/20 6:23 AM, Stephen Rothwell wrote:
> > Hi all,
> >
> > Changes since 20200724:
>
> on x86_64:
>
> WARNING: unme
Hi Wei,
Thank you for the patch.
On Sat, Jul 25, 2020 at 06:34:29AM +, Wei Yongjun wrote:
> Fix typo in parameter description.
>
> Fixes: d76271d22694 ("drm: xlnx: DRM/KMS driver for Xilinx ZynqMP DisplayPort
> Subsystem")
> Reported-by: Hulk Robot
> Signed-off-by: Wei Yongjun
Reviewed-b
On Wed, Jul 29, 2020 at 12:02:05AM +0200, dan...@ffwll.ch wrote:
> Hi Hyun Kwon,
>
> Are you all sorted with drm-misc commit rights so you can push the 3
> (maybe there's more) xlnx fixup patches to drm-misc-next-fixes?
Thanks Daniel for bringing this up.
Hyun, would that work for you ?
> On Sa
Hi Colin,
Thank you for the patch.
On Fri, Jul 24, 2020 at 12:12:58PM +0100, Colin King wrote:
> From: Colin Ian King
>
> There is a spelling mistake in a dev_dbg messages. Fix it.
There is a spelling mistake in the commit message, s/xln/xlnx/ ;-)
> Signed-off-by: Colin Ian King
Reviewed-by
Hi Christoph,
On Tue, Jul 28, 2020 at 8:33 AM Christoph Hellwig wrote:
>
> A few tiny nitpicks:
>
> The subject should have the dma-mapping prefix, this doesn't
> really touch the device core.
>
> > - rc = of_dma_get_range(np, &dma_addr, &paddr, &size);
> > + rc = of_dma_get_range(np, &ma
On Tue, Jul 28, 2020 at 11:05 AM Rob Herring wrote:
>
> On Fri, Jul 24, 2020 at 2:45 PM Jim Quinlan
> wrote:
> >
> > The new field 'dma_range_map' in struct device is used to facilitate the
> > use of single or multiple offsets between mapping regions of cpu addrs and
> > dma addrs. It subsumes
> On Jul 27, 2020, at 11:42 PM, Dave Airlie wrote:
>
> From: Dave Airlie
>
> Just drop the argument from this.
>
> This does ask the question if this is the function vmwgfx
> should be using or should it be doing an evict all like
> the other drivers.
Yea, it really should. This code is real
On Tue, 28 Jul 2020 at 17:49, Christian König wrote:
>
> Am 28.07.20 um 06:51 schrieb Dave Airlie:
> > From: Dave Airlie
> >
> > This was removed in
> > f5a9a9383f279de9da63296cb623a6418a66196b drm/ttm: remove
> > TTM_MEMTYPE_FLAG_CMA
> >
> > but the the declaration was left dangling.
> >
> > Si
On Tue, 28 Jul 2020 at 17:49, Christian König wrote:
>
> Am 28.07.20 um 06:17 schrieb Dave Airlie:
> > From: Dave Airlie
> >
> > This is confusing, and from my reading of all the drivers only
> > nouveau got this right.
> >
> > Just make the API act under driver control of it's own allocation
> >
Hello,
On Tue, Jul 28, 2020 at 03:35:43PM -0700, Laurent Pinchart wrote:
> On Wed, Jul 29, 2020 at 12:02:05AM +0200, dan...@ffwll.ch wrote:
> > Hi Hyun Kwon,
> >
> > Are you all sorted with drm-misc commit rights so you can push the 3
> > (maybe there's more) xlnx fixup patches to drm-misc-next-fi
Hi Maxime,
I love your patch! Yet something to improve:
[auto build test ERROR on sunxi/sunxi/for-next]
[also build test ERROR on soc/for-next xlnx/master linus/master v5.8-rc7
next-20200728]
[cannot apply to mripard/sunxi/for-next]
[If your patch is applied to the wrong git tree, kindly drop
https://bugzilla.kernel.org/show_bug.cgi?id=207383
--- Comment #106 from Duncan (1i5t5.dun...@cox.net) ---
(In reply to Duncan from comment #101)
> (In reply to Nicholas Kazlauskas from comment #95)
> > Created attachment 290583 [details]
> > 0001-drm-amd-display-Force-add-all-CRTCs-to-state-when-
On Tue, 28 Jul 2020 at 04:51, James Jones wrote:
>
> On 7/23/20 9:06 PM, Ben Skeggs wrote:
> > On Sat, 18 Jul 2020 at 13:34, James Jones wrote:
> >>
> >> Accept the DRM_FORMAT_MOD_NVIDIA_16BX2_BLOCK()
> >> family of modifiers to handle broken userspace
> >> Xorg modesetting and Mesa drivers. Exis
On Wed, 29 Jul 2020 at 12:48, Dave Airlie wrote:
>
> On Tue, 28 Jul 2020 at 04:51, James Jones wrote:
> >
> > On 7/23/20 9:06 PM, Ben Skeggs wrote:
> > > On Sat, 18 Jul 2020 at 13:34, James Jones wrote:
> > >>
> > >> Accept the DRM_FORMAT_MOD_NVIDIA_16BX2_BLOCK()
> > >> family of modifiers to ha
Hi Linus,
I'm sending this out a bit early, just to give you a chance to reject
it or help decide on an rc8.
The nouveau fixes missed the last pull by a few hours, and we had a
few arm driver/panel/bridge fixes come in. This is possibly a bit more
than I'm comfortable sending at this stage, but I
On Wed, 29 Jul 2020 at 15:05, Nick Bowler wrote:
>
> Hi,
>
> After installing Linux 5.8-rc7 I seem to get no video output on my
> NV36 card once the nouveau module is loaded. The display (connected
> to the digital output) simply reports "No Signal".
>
> I bisected to the following commit, and re
This adds a heap that allocates non-contiguous buffers that are
marked as writecombined, so they are not cached by the CPU.
This is useful, as most graphics buffers are usually not touched
by the CPU or only written into once by the CPU. So when mapping
the buffer over and over between devices, we
Keep track of the heap device struct.
This will be useful for special DMA allocations
and actions.
Cc: Sumit Semwal
Cc: Andrew F. Davis
Cc: Benjamin Gaignard
Cc: Liam Mark
Cc: Laura Abbott
Cc: Brian Starkey
Cc: Hridya Valsaraju
Cc: linux-me...@vger.kernel.org
Cc: dri-devel@lists.freedeskto
On Wed, 29 Jul 2020 at 06:33, Ruhl, Michael J
wrote:
> >-Original Message-
> >From: Ben Skeggs
> >Sent: Tuesday, July 28, 2020 4:16 PM
> >To: Ruhl, Michael J
> >Cc: Dave Airlie ; dri-devel@lists.freedesktop.org;
> >bske...@redhat.com
> >Subject: Re: [PATCH] nouveau: use ttm populate map
As of commit d8bd15b37d32 ("drm/dp_mst: Fix the DDC I2C device
registration of an MST port"), DP MST DDC I2C devices are consistently
parented to the underlying DRM device, making it challenging to
associate the ddc i2c device with its connector from userspace.
Given the need for further refactori
On Wed, 15 Jul 2020 at 17:00, Tetsuo Handa
wrote:
>
> On 2020/07/14 18:13, Gu Jinxiang wrote:
> > I've encountered [BUG: unable to handle kernel NULL pointer dereference at]
> > which has call stack like your pattern2.
> > And before this happended, I got a lot of memory allocation failure
> > w
On Fri, 24 Jul 2020 at 16:43, Thomas Zimmermann wrote:
>
>
>
> Am 23.07.20 um 17:17 schrieb Christian König:
> > Instead of repeating that in each driver.
> >
> > Signed-off-by: Christian König
>
> Reviewed-by: Thomas Zimmermann
I'm not sure what happened but the patchwork copies of this series
On Wed, 29 Jul 2020 at 16:21, Dave Airlie wrote:
>
> On Fri, 24 Jul 2020 at 16:43, Thomas Zimmermann wrote:
> >
> >
> >
> > Am 23.07.20 um 17:17 schrieb Christian König:
> > > Instead of repeating that in each driver.
> > >
> > > Signed-off-by: Christian König
> >
> > Reviewed-by: Thomas Zimmerm
https://bugzilla.kernel.org/show_bug.cgi?id=207383
--- Comment #107 from Paul Menzel (pmenzel+bugzilla.kernel@molgen.mpg.de)
---
Everyone seeing this, it’d be great, if you tested
[PATCH] drm/amd/display: Clear dm_state for fast updates
and reported any noticeable performance regression
Add DT bindings for Chefree CH101OLHLWH-002 10.1" 1280x800 LCD.
This panel is connected via LVDS.
Signed-off-by: Marek Vasut
To: dri-devel@lists.freedesktop.org
Cc: Rob Herring
Cc: Sam Ravnborg
Cc: devicet...@vger.kernel.org
---
.../devicetree/bindings/display/panel/panel-simple.yaml |
The Chefree Technology Corp. is an LCD panel manufacturer.
Signed-off-by: Marek Vasut
To: dri-devel@lists.freedesktop.org
Cc: Rob Herring
Cc: Sam Ravnborg
Cc: devicet...@vger.kernel.org
---
Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
1 file changed, 2 insertions(+)
diff --g
On 7/28/20 3:32 PM, Laurent Pinchart wrote:
> Hi Randy,
>
> (adding a few people to the CC list to discuss the proposed solution
> below)
>
> Thanks for the report.
>
> On Mon, Jul 27, 2020 at 05:49:41PM -0700, Randy Dunlap wrote:
>> On 7/27/20 6:23 AM, Stephen Rothwell wrote:
>>> Hi all,
>>>
>>
Compiler leaves a 4-byte hole near the end of `dev_info`, causing
amdgpu_info_ioctl() to copy uninitialized kernel stack memory to userspace
when `size` is greater than 356.
In 2015 we tried to fix this issue by doing `= {};` on `dev_info`, which
unfortunately does not initialize that 4-byte hole.
On Fri, Jul 17, 2020 at 03:37:44PM +0200, Hans de Goede wrote:
> While looking into adding atomic-pwm support to the pwm-crc driver I
> noticed something odd, there is a PWM_BASE_CLK define of 6 MHz and
> there is a clock-divider which divides this with a value between 1-128,
> and there are 256 du
Hi,
After installing Linux 5.8-rc7 I seem to get no video output on my
NV36 card once the nouveau module is loaded. The display (connected
to the digital output) simply reports "No Signal".
I bisected to the following commit, and reverting this commit on
top of 5.8-rc7 appears to correct the iss
Le mer. 29 juil. 2020 à 0:00, dan...@ffwll.ch a écrit :
On Tue, Jul 28, 2020 at 10:17:36PM +0200, Sam Ravnborg wrote:
Hi Paul.
On Tue, Jul 28, 2020 at 05:16:39PM +0200, Paul Cercueil wrote:
> Here are a few cleanups to the ingenic-drm driver.
> - some error paths were missing and have be
Add back the removed documentation for drm_gem_open_ioctl.
This patch is submitted in response to [1].
[1]
https://lore.kernel.org/linux-arm-msm/20200728085244.GY6419@phenom.ffwll.local/
Signed-off-by: Steve Cohen
---
drivers/gpu/drm/drm_gem.c | 3 +++
1 file changed, 3 insertions(+)
diff --g
syzbot is reporting OOB read bug in vc_do_resize() [1] caused by memcpy()
based on outdated old_{rows,row_size} values, for resize_screen() can
recurse into vc_do_resize() which changes vc->vc_{cols,rows} that outdates
old_{rows,row_size} values which were read before calling resize_screen().
Mini
On 2020-07-29, Dave Airlie wrote:
> On Wed, 29 Jul 2020 at 15:05, Nick Bowler wrote:
>>
>> Hi,
>>
>> After installing Linux 5.8-rc7 I seem to get no video output on my
>> NV36 card once the nouveau module is loaded. The display (connected
>> to the digital output) simply reports "No Signal".
>>
A soft deadlock occurs when call hrtimer_cancel in softirq context:
a) The main frequency of the machine is very slow
b) output->period_ns is very small, even only 1 ns
The problem can be solved in the following way: Setting a hrtimer exit flag
in the vkms_disable_vblank function
Add support for the Chefree CH101OLHLWH-002 10.1" (1280x800)
color TFT LCD panel, connected over LVDS.
Timings are taken from the datasheet version P0.5.
Signed-off-by: Marek Vasut
To: dri-devel@lists.freedesktop.org
Cc: Rob Herring
Cc: Sam Ravnborg
Cc: devicet...@vger.kernel.org
---
drivers/
101 - 188 of 188 matches
Mail list logo
