s machine.
You should at least set modprobe.blacklist=fglrx on the kernel command line.
--
You are receiving this mail because:
You are the assignee for the bug.
-- next part --
An HTML attachment was scrubbed...
URL:
<https://lists.freedesktop.org/archives/dri-devel/attachments/20160308/1e87c7a0/attachment.html>
Add HDMI audio support. Adds mcasp0_pins, clk_mcasp0_fixed,
clk_mcasp0, mcasp0, sound node, and updates the tda19988 node to
follow the new binding.
Signed-off-by: Jyri Sarha
---
arch/arm/boot/dts/am335x-boneblack.dts | 71 --
1 file changed, 67 insertions(+), 4 d
Register ASoC HDMI codec for audio functionality and adds device tree
binding for audio configuration.
With the registered HDMI codec the tda998x node can be used like a
regular codec node in ASoC card configurations. HDMI audio info-frame
and audio stream header is generated by the ASoC HDMI code
Define struct tda998x_audio_params in include/drm/i2c/tda998x.h and
use it in pdata and for tda998x_configure_audio() parameters. Also
updates tda998x_write_aif() to take struct hdmi_audio_infoframe *
directly as a parameter.
Signed-off-by: Jyri Sarha
---
drivers/gpu/drm/i2c/tda998x_drv.c | 77 +
Add audio abort() callback, that is provided at audio stream start,
for video side. This is for video side to use in case there is a
pressing need to tear down the audio playback for some reason.
Signed-off-by: Jyri Sarha
---
include/sound/hdmi-codec.h| 8 ++--
sound/soc/codecs/hdmi-cod
The hdmi-codec is a platform device driver to be registered from
drivers of external HDMI encoders with I2S and/or spdif interface. The
driver in turn registers an ASoC codec for the HDMI encoder's audio
functionality.
The structures and definitions in the API header are mostly redundant
copies of
Add IEC958 channel status helper that gets the audio properties from
snd_pcm_hw_params instead of snd_pcm_runtime. This is needed to
produce the channel status bits already in audio stream configuration
phase.
Signed-off-by: Jyri Sarha
---
include/sound/pcm_iec958.h | 2 ++
sound/core/pcm_iec95
There is currently two other patch series[1][2] that depend on the
three first (ALSA-) patches of this series. It would be nice to get at
least those three applied sooner rather than later, so please tell me
if I can do anything to get those in.
BTW, I applied the relevant patches from the two ser
ication/pgp-signature
Size: 819 bytes
Desc: not available
URL:
<https://lists.freedesktop.org/archives/dri-devel/attachments/20160308/da531a2e/attachment-0001.sig>
Passing overlapping source and destination buffers to snprintf
formally has undefined behaviour and is rather fragile. While the
rather special case of passing the output buffer as the argument
corresponding to a leading "%s" in the format string currently works
with the kernel's printf implementat
Hi,
On Tue, Mar 08, 2016 at 05:39:32PM +0100, Sebastian Reichel wrote:
> This series adds support for the Nokia N950 display.
> Since the panel is using DSI command mode, it involves
> adding support for manually updated displays to
> omapdrm.
Works OK, but the picture seems to be upside down? Al
e bug.
-- next part --
An HTML attachment was scrubbed...
URL:
<https://lists.freedesktop.org/archives/dri-devel/attachments/20160308/b57f82c0/attachment.html>
are the assignee for the bug.
-- next part --
An HTML attachment was scrubbed...
URL:
<https://lists.freedesktop.org/archives/dri-devel/attachments/20160308/a5c9ed58/attachment.html>
xt part --
An HTML attachment was scrubbed...
URL:
<https://lists.freedesktop.org/archives/dri-devel/attachments/20160308/5921c88e/attachment.html>
https://bugzilla.kernel.org/show_bug.cgi?id=113861
--- Comment #11 from Alex Deucher ---
Already reverted upstream:
http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=256faedcfd646161477d47a1a78c32a562d2e845
--
You are receiving this mail because:
You are watching the ass
https://bugzilla.kernel.org/show_bug.cgi?id=113861
--- Comment #10 from centuryplague at yandex.com ---
The exact commit that was reverted is:
https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=dbb17a21c131eca94eb31136eee9a7fe5aff00d9
--
You are receiving this mail becaus
https://bugzilla.kernel.org/show_bug.cgi?id=113861
--- Comment #9 from centuryplague at yandex.com ---
(In reply to Alex Deucher from comment #7)
> Probably the same issue as reported here:
> https://lists.freedesktop.org/archives/dri-devel/2016-March/102379.html
> Does reverting dbb17a21c131eca94
On 03/03/2016 02:42 PM, Gustavo Padovan wrote:
> From: Gustavo Padovan
>
> Burn the old opcode to avoid any potential old userspace running the old
> API to get weird errors. Changing the opcodes will make them fail right
> away.
>
> This is just a precaution, there no upstream users of these inte
On 03/03/2016 11:40 AM, Gustavo Padovan wrote:
> From: Gustavo Padovan
>
> Inform userspace how many fences are in the sync_fence_info field.
>
> Signed-off-by: Gustavo Padovan
> Reviewed-by: Maarten Lankhorst
> ---
> drivers/staging/android/sync.c | 2 ++
> drivers/staging/android/uapi/
You are receiving this mail because:
You are the assignee for the bug.
-- next part --
An HTML attachment was scrubbed...
URL:
<https://lists.freedesktop.org/archives/dri-devel/attachments/20160308/bc445504/attachment.html>
https://bugzilla.kernel.org/show_bug.cgi?id=114031
--- Comment #12 from Alex Deucher ---
Created attachment 208311
--> https://bugzilla.kernel.org/attachment.cgi?id=208311&action=edit
possible fix 2/2
--
You are receiving this mail because:
You are watching the assignee of the bug.
https://bugzilla.kernel.org/show_bug.cgi?id=114031
--- Comment #11 from Alex Deucher ---
Created attachment 208301
--> https://bugzilla.kernel.org/attachment.cgi?id=208301&action=edit
possible fix 1/2
Odd. it looks like the 1920x1080 mode is getting added. Do either of these
patches help?
--
Hello Jyri,
> +
> +static int hdmi_codec_hw_params(struct snd_pcm_substream *substream,
> + struct snd_pcm_hw_params *params,
> + struct snd_soc_dai *dai)
> +{
> + struct hdmi_codec_priv *hcp = snd_soc_dai_get_drvdata(dai);
> + struct
https://bugzilla.kernel.org/show_bug.cgi?id=114031
--- Comment #10 from Massimo Burcheri ---
Created attachment 208291
--> https://bugzilla.kernel.org/attachment.cgi?id=208291&action=edit
dmesg with debugging patch
--
You are receiving this mail because:
You are watching the assignee of the b
Provide omapdrm with methods to acquire timings
and check them later, so that it can properly
initialize the display.
Signed-off-by: Sebastian Reichel
---
drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c | 38 +
1 file changed, 38 insertions(+)
diff --git a/drivers/gpu/dr
Generating debug messages during display update results
in lot's of messages, if the display shows the console.
Signed-off-by: Sebastian Reichel
---
drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/omapdrm/d
DSI hardware IPs seem to be a bit unhappy about
incomplete image transfers, so try to wait for
an update to finish before disabling the panel.
Signed-off-by: Sebastian Reichel
---
drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c | 18 ++
1 file changed, 18 insertions(+)
diff --gi
The Nokia N950 contains a panel, that is partially
covered, so that not the whole display is visible.
Thus the image must be displayed with an offset.
Signed-off-by: Sebastian Reichel
---
drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c | 21 -
1 file changed, 16 insertions(+)
Introduce new DT properties, so that it's possible
to use different panels with the driver.
* resolution-x (default: 864)
* resolution-y (default: 480)
* has-dsi-backlight (default: no backlight)
Signed-off-by: Sebastian Reichel
---
drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c | 17 ++
Use threaded irq handler for the tearing effect gpio,
since it updates the display content, which requires
too much time for a fastpath irq.
Signed-off-by: Sebastian Reichel
---
drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --gi
The N950's display requires two regulators.
Signed-off-by: Sebastian Reichel
---
drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c | 57 +++--
1 file changed, 53 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c
b/drivers/gpu/drm/omapd
Signed-off-by: Sebastian Reichel
---
drivers/gpu/drm/omapdrm/omap_connector.c | 12
drivers/gpu/drm/omapdrm/omap_drv.h | 2 --
drivers/gpu/drm/omapdrm/omap_fb.c| 2 +-
3 files changed, 1 insertion(+), 15 deletions(-)
diff --git a/drivers/gpu/drm/omapdrm/omap_connecto
Signed-off-by: Sebastian Reichel
---
drivers/gpu/drm/omapdrm/omap_crtc.c | 91 +++--
drivers/gpu/drm/omapdrm/omap_drv.h | 2 +
2 files changed, 90 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/omapdrm/omap_crtc.c
b/drivers/gpu/drm/omapdrm/omap_crtc
Save the framedone callback supplied by dss for later
usage.
Signed-off-by: Sebastian Reichel
---
drivers/gpu/drm/omapdrm/omap_crtc.c | 24
1 file changed, 24 insertions(+)
diff --git a/drivers/gpu/drm/omapdrm/omap_crtc.c
b/drivers/gpu/drm/omapdrm/omap_crtc.c
index 094
Due to a hardware bug, FIFOs thresholds must be
configured very carefully for manually updated
displays.
Signed-off-by: Sebastian Reichel
---
drivers/gpu/drm/omapdrm/omap_crtc.c | 4
1 file changed, 4 insertions(+)
diff --git a/drivers/gpu/drm/omapdrm/omap_crtc.c
b/drivers/gpu/drm/omapdrm
This is a workaround for a hardware bug occuring
on OMAP3 with manually updated panels.
Signed-off-By: Sebastian Reichel
---
drivers/gpu/drm/omapdrm/omap_drv.h | 1 +
drivers/gpu/drm/omapdrm/omap_plane.c | 23 +++
2 files changed, 24 insertions(+)
diff --git a/drivers/gpu
The FIFO thresholds must be configured by omapdrm for
manually updated DSI panels due to a hardware bug.
Signed-off-By: Sebastian Reichel
---
include/video/omapdss.h | 6 ++
1 file changed, 6 insertions(+)
diff --git a/include/video/omapdss.h b/include/video/omapdss.h
index 9bde65b79220..f6
Signed-off-by: Sebastian Reichel
---
drivers/gpu/drm/omapdrm/omap_crtc.c | 31 ++-
drivers/gpu/drm/omapdrm/omap_drv.h | 1 +
2 files changed, 31 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/omapdrm/omap_crtc.c
b/drivers/gpu/drm/omapdrm/omap_crtc.c
inde
Introduce a new dss method for reading the stallmode
status from the private lcd config structure.
Signed-off-By: Sebastian Reichel
---
drivers/gpu/drm/omapdrm/dss/output.c | 6 ++
include/video/omapdss.h | 1 +
2 files changed, 7 insertions(+)
diff --git a/drivers/gpu/drm/omap
Signed-off-by: Sebastian Reichel
---
drivers/gpu/drm/omapdrm/omap_crtc.c | 4
1 file changed, 4 insertions(+)
diff --git a/drivers/gpu/drm/omapdrm/omap_crtc.c
b/drivers/gpu/drm/omapdrm/omap_crtc.c
index 5ef27664bcfa..78ef9773cca1 100644
--- a/drivers/gpu/drm/omapdrm/omap_crtc.c
+++ b/drive
Having the pending variable available as atomic bit helps
with the later addition of manually updated display support.
Signed-off-by: Sebastian Reichel
---
drivers/gpu/drm/omapdrm/omap_crtc.c | 31 +--
1 file changed, 17 insertions(+), 14 deletions(-)
diff --git a/dr
Updating the plane may interrupt ongoing display
updates, so wait for any pending operations.
Signed-off-By: Sebastian Reichel
---
drivers/gpu/drm/omapdrm/omap_drv.c | 4
1 file changed, 4 insertions(+)
diff --git a/drivers/gpu/drm/omapdrm/omap_drv.c
b/drivers/gpu/drm/omapdrm/omap_drv.c
i
This reverts commit 5a35876e2830511cb8110667fc426c6a6165a593.
Revert the removal of manual update display support in
preparation for DSI command mode panels.
Signed-off-By: Sebastian Reichel
---
drivers/gpu/drm/omapdrm/omap_connector.c | 12 +++
drivers/gpu/drm/omapdrm/omap_drv.h | 4
This sets proper connector type for DSI connected panels.
Signed-off-By: Sebastian Reichel
---
drivers/gpu/drm/omapdrm/omap_drv.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/gpu/drm/omapdrm/omap_drv.c
b/drivers/gpu/drm/omapdrm/omap_drv.c
index dfafdb602ad2..a3ff35f5f6cd 100644
From: Tomi Valkeinen
The Nokia N950's bootloader leaves the DSI module
in a non-working state. Work around this by resetting
the DSI module before using it.
Signed-off-By: Tomi Valkeinen
Reviewed-By: Sebastian Reichel
Tested-By: Sebastian Reichel
---
drivers/gpu/drm/omapdrm/dss/dsi.c | 24 ++
Signed-off-By: Sebastian Reichel
---
arch/arm/boot/dts/omap3-n950.dts | 71
1 file changed, 71 insertions(+)
diff --git a/arch/arm/boot/dts/omap3-n950.dts b/arch/arm/boot/dts/omap3-n950.dts
index 0885b34d5d7d..41b8fb585272 100644
--- a/arch/arm/boot/dts/o
Add regulator configuration as found in the
board files of Nokia's kernel.
Signed-off-By: Sebastian Reichel
---
arch/arm/boot/dts/omap3-n950-n9.dtsi | 72
1 file changed, 72 insertions(+)
diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi
b/arch/arm/boot/dts
Hi,
This series adds support for the Nokia N950 display.
Since the panel is using DSI command mode, it involves
adding support for manually updated displays to
omapdrm.
The following patches, that are based on 4.5-rc7
were tested with fbcon and Xorg (from Debian sid)
on the N950.
-- Sebastian
S
https://bugzilla.kernel.org/show_bug.cgi?id=114031
--- Comment #9 from Alex Deucher ---
Created attachment 208281
--> https://bugzilla.kernel.org/attachment.cgi?id=208281&action=edit
add debugging output
Can you attach your dmesg output with the attached debugging patch applied?
--
You are r
https://bugzilla.kernel.org/show_bug.cgi?id=114031
--- Comment #8 from Massimo Burcheri ---
Created attachment 208271
--> https://bugzilla.kernel.org/attachment.cgi?id=208271&action=edit
vbios.rom
--
You are receiving this mail because:
You are watching the assignee of the bug.
https://bugzilla.kernel.org/show_bug.cgi?id=114031
--- Comment #7 from Massimo Burcheri ---
Current workaround is using CONFIG_DRM_LOAD_EDID_FIRMWARE and the generic EDID
by kernel command:
drm_kms_helper.edid_firmware=edid/1920x1080.bin
--
You are receiving this mail because:
You are watching
https://bugzilla.kernel.org/show_bug.cgi?id=114031
--- Comment #6 from Alex Deucher ---
Can you attach a copy if your vbios?
(as root)
(use lspci to get the bus id)
cd /sys/bus/pci/devices/
echo 1 > rom
cat rom > /tmp/vbios.rom
echo 0 > rom
--
You are receiving this mail because:
You are watch
https://bugzilla.kernel.org/show_bug.cgi?id=114031
--- Comment #5 from Massimo Burcheri ---
Created attachment 208261
--> https://bugzilla.kernel.org/attachment.cgi?id=208261&action=edit
Xorg.log
--
You are receiving this mail because:
You are watching the assignee of the bug.
https://bugzilla.kernel.org/show_bug.cgi?id=114031
Massimo Burcheri changed:
What|Removed |Added
Attachment #208241|0 |1
is obsolete|
https://bugzilla.kernel.org/show_bug.cgi?id=114031
--- Comment #3 from Massimo Burcheri ---
Created attachment 208241
--> https://bugzilla.kernel.org/attachment.cgi?id=208241&action=edit
dmesg
--
You are receiving this mail because:
You are watching the assignee of the bug.
https://bugzilla.kernel.org/show_bug.cgi?id=114031
--- Comment #2 from Massimo Burcheri ---
Hm, I think xorg is not even involved in the issue..
No xorg.config but these snippets:
$ cat /etc/X11/xorg.conf.d/*
Section "Files"
EndSection
Section "Module"
Load"vnc"
EndSection
Section "Scre
Le 06/01/2016 11:19, Boris Brezillon a écrit :
> Move the adjusted display mode check into ->mode_fixup().
>
> Signed-off-by: Boris Brezillon
Seems okay:
Acked-by: Nicolas Ferre
> ---
> drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c | 10 --
> 1 file changed, 4 insertions(+), 6 dele
https://bugzilla.kernel.org/show_bug.cgi?id=114031
Alex Deucher changed:
What|Removed |Added
CC||alexdeucher at gmail.com
--- Comment #1 f
https://bugzilla.kernel.org/show_bug.cgi?id=113891
Alex Deucher changed:
What|Removed |Added
CC||alexdeucher at gmail.com
--- Comment #2 f
https://bugzilla.kernel.org/show_bug.cgi?id=114031
Bug ID: 114031
Summary: Radeon Kernel Mode Setting sets wrong mode on Acer
Z5610
Product: Drivers
Version: 2.5
Kernel Version: 4.3.6
Hardware: All
OS: L
3.19.8-ckt16 -stable review patch. If anyone has any objections, please let me
know.
---8<
From: Mario Kleiner
commit bb74fc1bf3072bd3ab4ed5f43afd287a63baf2d7 upstream.
drm_vblank_offdelay can have three different types of values:
This is a note to let you know that I have just added a patch titled
drm: Fix treatment of drm_vblank_offdelay in drm_vblank_on() (v2)
to the linux-3.19.y-queue branch of the 3.19.y-ckt extended stable tree
which can be found at:
http://kernel.ubuntu.com/git/ubuntu/linux.git/log/?h=linu
Le 06/01/2016 11:19, Boris Brezillon a écrit :
> The display timings on old SoCs older than the sama5d4 are quite limited
> and prevent the use of many displays. Add support for extended timing
> ranges on sama5d2 and sama5d4.
>
> Signed-off-by: Boris Brezillon
Absolutely:
Acked-by: Nicolas Fer
Le 06/01/2016 11:19, Boris Brezillon a écrit :
> The ->dpms field is no longer used and can be removed.
> The same goes for the dummy ->mode_fixup() implementation which always
> returns true.
>
> Signed-off-by: Boris Brezillon
Acked-by: Nicolas Ferre
> ---
> drivers/gpu/drm/atmel-hlcdc/atme
Le 06/01/2016 11:19, Boris Brezillon a écrit :
> Add a ->cleanup_fb() operation to avoid memory leaks when the atomic
> operation is interrupted after the ->prepare_fb() call.
>
> Signed-off-by: Boris Brezillon
> Fixes 2389fc1 ("drm: atmel-hlcdc: Atomic mode-setting conversion")
Seems okay:
Rev
Le 06/01/2016 11:19, Boris Brezillon a écrit :
> The hlcdc IP keep the pixel stream in raw RGB mode, and does not provide
> any specific connector. Since DRM_MODE_CONNECTOR_RAW_RGB does not exist,
> use DRM_MODE_CONNECTOR_Unknown.
>
> Signed-off-by: Boris Brezillon
Yes:
Acked-by: Nicolas Ferre
The copy_from_user() function returns the number of bytes not copied but
we want to return a negative error code.
Fixes: 463873d57014 ('drm/vc4: Add an API for creating GPU shaders in GEM BOs.')
Signed-off-by: Dan Carpenter
diff --git a/drivers/gpu/drm/vc4/vc4_bo.c b/drivers/gpu/drm/vc4/vc4_bo.c
Add an HDMI connector node and enable the devices that are part of the
HDMI display path: cec, dpi0, hdmi_phy, and hdmi0.
Signed-off-by: Philipp Zabel
---
arch/arm64/boot/dts/mediatek/mt8173-evb.dts | 38 +
1 file changed, 38 insertions(+)
diff --git a/arch/arm64/boo
The hdmitx_dig_cts clock signal is not a child of tvdpll_445p5m,
but is routed out of the HDMI PHY module.
Signed-off-by: Philipp Zabel
Acked-by: Stephen Boyd
---
drivers/clk/mediatek/clk-mt8173.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/clk/mediatek/clk-mt8173.c
b/drivers/cl
Add an optional ddc-i2c-bus phandle property that points to
an I2C master controller that handles the connector DDC pins.
Signed-off-by: Philipp Zabel
Acked-by: Rob Herring
---
Documentation/devicetree/bindings/display/connector/hdmi-connector.txt | 1 +
1 file changed, 1 insertion(+)
diff --g
The configurable hdmi_ref output of the PLL block is derived from
the tvdpll_594m clock signal via a configurable PLL post-divider.
It is used as the PLL reference input to the HDMI PHY module.
Signed-off-by: Philipp Zabel
Acked-by: James Liao
Acked-by: Stephen Boyd
---
drivers/clk/mediatek/cl
This mux is supposed to select a fitting divider after the PLL
is already set to the correct rate.
Signed-off-by: Philipp Zabel
Acked-by: James Liao
Acked-by: Stephen Boyd
---
drivers/clk/mediatek/clk-mt8173.c | 6 +-
drivers/clk/mediatek/clk-mtk.h| 15 +--
2 files changed
From: CK Hu
This patch adds the device nodes for the HDMI encoder, HDMI PHY,
and HDMI CEC modules.
Signed-off-by: CK Hu
Signed-off-by: Cawa Cheng
Signed-off-by: Jie Qiu
Signed-off-by: Daniel Kurtz
Signed-off-by: Philipp Zabel
---
arch/arm64/boot/dts/mediatek/mt8173.dtsi | 69 ++
From: CK Hu
This patch adds the device nodes for the DISP function blocks
comprising the display subsystem.
Signed-off-by: CK Hu
Signed-off-by: Cawa Cheng
Signed-off-by: Jie Qiu
Signed-off-by: Daniel Kurtz
Signed-off-by: Philipp Zabel
---
Changes since v12:
- Remove iommus property from mm
From: Jie Qiu
MT8173 HDMI hardware has a output control bit to enable/disable HDMI
output. Because of security reason, so this bit can ONLY be controlled
in ARM supervisor mode. Now the only way to enter ARM supervisor is the
ARM trusted firmware. So atf provides a API for HDMI driver to call to
From: Jie Qiu
This patch adds drivers for the HDMI bridge connected to the DPI0
display subsystem function block, for the HDMI DDC block, and for
the HDMI PHY to support HDMI output.
Signed-off-by: Jie Qiu
Signed-off-by: Philipp Zabel
---
drivers/gpu/drm/mediatek/Kconfig | 7 +
Add the device tree binding documentation for Mediatek HDMI,
HDMI PHY and HDMI DDC devices.
Signed-off-by: Philipp Zabel
Acked-by: Rob Herring
---
.../bindings/display/mediatek/mediatek,hdmi.txt| 148 +
1 file changed, 148 insertions(+)
create mode 100644
Documentation
From: Jie Qiu
Add DPI connector/encoder to support HDMI output via the
attached HDMI bridge.
Signed-off-by: Jie Qiu
Signed-off-by: Philipp Zabel
---
drivers/gpu/drm/mediatek/Makefile | 3 +-
drivers/gpu/drm/mediatek/mtk_dpi.c | 757
drivers/gpu/dr
From: CK Hu
This patch add a drm encoder/connector driver for the MIPI DSI function
block of the Mediatek display subsystem and a phy driver for the MIPI TX
D-PHY control module.
Signed-off-by: Jitao Shi
Signed-off-by: Philipp Zabel
--
drivers/gpu/drm/mediatek/Kconfig | 2 +
drivers/g
From: CK Hu
This patch adds an initial DRM driver for the Mediatek MT8173 DISP
subsystem. It currently supports two fixed output streams from the
OVL0/OVL1 sources to the DSI0/DPI0 sinks, respectively.
Signed-off-by: CK Hu
Signed-off-by: YT Shen
Signed-off-by: Daniel Kurtz
Signed-off-by: Bibb
From: CK Hu
Add device tree binding documentation for the display subsystem in
Mediatek MT8173 SoCs.
Signed-off-by: CK Hu
Signed-off-by: Philipp Zabel
Acked-by: Rob Herring
---
.../bindings/display/mediatek/mediatek,disp.txt| 203 +
.../bindings/display/mediatek/media
Once more, the MT8173 DRM driver. I have dropped the iommus property
from the mmsys device tree node and changed the GEM code to use an
OVL device with the iommus property for allocations instead of the
mmsys device.
Changes since v12:
- use OVL device instead of mmsys device for DMA allocations
Hi Dave,
radeon and amdgpu fixes for 4.5. Three regression fixes and
some fixups for the error handling in the vblank regression fixes
from earlier.
The following changes since commit f0511e66114a6414cfca92d7b94118913a0c11ff:
Merge branch 'drm-fixes-4.5' of git://people.freedesktop.org/~agd5f/
On Tue, Mar 08, 2016 at 12:13:22PM +, Daniel Stone wrote:
> Hi,
>
> On 8 March 2016 at 11:45, Rob Bradford wrote:
> > On Fri, 2016-02-26 at 17:04 +, Lionel Landwerlin wrote:
> >> This series introduces pipe level color management through a set of
> >> properties
> >> attached to the CRTC.
On Fri, Mar 04, 2016 at 03:29:03PM +0200, Ville Syrjälä wrote:
> On Thu, Mar 03, 2016 at 10:17:42AM +0100, Maarten Lankhorst wrote:
> > connector_state->crtc can no longer be unset by accident,
> > so that check can be removed. The other code open-codes
> > drm_atomic_get_existing_crtc_state, so
--
An HTML attachment was scrubbed...
URL:
<https://lists.freedesktop.org/archives/dri-devel/attachments/20160308/f75585d1/attachment.html>
next part --
An HTML attachment was scrubbed...
URL:
<https://lists.freedesktop.org/archives/dri-devel/attachments/20160308/0c43681c/attachment-0001.html>
--
An HTML attachment was scrubbed...
URL:
<https://lists.freedesktop.org/archives/dri-devel/attachments/20160308/076f236b/attachment.html>
are the assignee for the bug.
-- next part --
An HTML attachment was scrubbed...
URL:
<https://lists.freedesktop.org/archives/dri-devel/attachments/20160308/5a80b4e9/attachment.html>
--
You are receiving this mail because:
You are the assignee for the bug.
-- next part --
An HTML attachment was scrubbed...
URL:
<https://lists.freedesktop.org/archives/dri-devel/attachments/20160308/6375bdf1/attachment.html>
Hi,
On 8 March 2016 at 11:45, Rob Bradford wrote:
> On Fri, 2016-02-26 at 17:04 +, Lionel Landwerlin wrote:
>> This series introduces pipe level color management through a set of
>> properties
>> attached to the CRTC. It also provides an implementation for some
>> Intel
>> platforms.
>> > Thi
On Sun, Mar 06, 2016 at 10:02:30PM +, Robin H. Johnson wrote:
> Introduce PCI_VENDOR/PCI_SUBVENDOR/PCI_SUBDEVICE defines to replace the
> constants scattered in the kernel already used to detect QEMU.
>
> They are defined in the QEMU codebase per docs/specs/pci-ids.txt.
>
> Signed-off-by: Rob
On Thu, Mar 03, 2016 at 10:53:50AM -0600, Bjorn Helgaas wrote:
> The purpose of this series is to:
>
> - Fix the "BAR 6: [??? 0x flags 0x2] has bogus alignment"
> messages reported by Linus [1], Andy [2], and others.
>
> - Move arch-specific shadow ROM location knowledge, e.g.,
>
On Fri, 2016-02-26 at 17:04 +, Lionel Landwerlin wrote:
> This series introduces pipe level color management through a set of
> properties
> attached to the CRTC. It also provides an implementation for some
> Intel
> platforms.
> > This series is based of a previous set of patches by Shashank S
On 8 March 2016 at 07:47, Jyri Sarha wrote:
> Hi,
> Based on discussion around this patch:
>
> https://lists.freedesktop.org/archives/dri-devel/2016-February/100685.html
>
> I think the patch below should get into queued for v4.5 fixes as the
> Beaglebone-Black display is currently broken in linux
On 8 March 2016 at 09:15, Sebastian Herbszt wrote:
> Thierry Reding wrote:
>> From: Thierry Reding
>>
>> This partially reverts commit d56f57ac969c ("drm/gma500: Move to private
>> save/restore hooks") which removed these lines by mistake.
>>
Thanks I've pulled this into drm-fixes.
Dave.
On 03/08/2016 11:04 AM, Eric Anholt wrote:
> Stephen Warren writes:
>
>> On 03/04/2016 01:32 PM, Eric Anholt wrote:
>>> VC4 is the GPU (display and 3D) present on the 283x.
>>
>>> diff --git a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
>>> b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
>>
>>> +&hdmi {
On Sat, Mar 5, 2016 at 8:39 PM, Mario Kleiner
wrote:
> The late 2009, 27 inch Apple iMac10,1 has an
> internal eDP display and an external Mini-
> Displayport output, driven by a DCE-3.2, RV730
> Radeon Mobility HD-4670.
>
> The machine worked fine in a dual-display setup
> with eDP panel + extern
https://bugzilla.kernel.org/show_bug.cgi?id=113891
Jean Delvare changed:
What|Removed |Added
Kernel Version|4.4.4 |4.4.4, 4.5-rc7
--
You are receiving this
https://bugzilla.kernel.org/show_bug.cgi?id=113951
ZdenÄk JaneÄek changed:
What|Removed |Added
Status|NEW |RESOLVED
Resolution|---
1 - 100 of 112 matches
Mail list logo