Hi to all!
I am using a ic-7800 rel. 2.30.
Using driver F230... the MAIN VFO will start to jump (every 5 second) on the
SUB VFO, as if it wish to check the SUB, then retur to MAIN in LOOPING
way. No way to stop it.
Using F130... does not happen but the frequency is complete wrong... it
- Original Message -
From: ik1MDF ik1...@aruba.it
To: dx4win@mailman.qth.net
Sent: Tuesday, November 08, 2011 11:41 AM
Subject: IC-7800... jumping
Hi to all!
I am using a ic-7800 rel. 2.30.
Using driver F230... the MAIN VFO will start to jump (every 5 second) on
the SUB VFO, as if
I surely am not a programmer, but would it be possible to link the priority
through the Awards? Then you could set it up for any Awardsuch as the
Challenge to accomplish this desired result.
With the Challenge gaining in popularity ( Most Old Dxers have attained
DXCC, WAS, WAZ, etc.) and
I noticed that when I print QSL labels, I am getting partial ones
printing at the bottom of the page. I am using 5160 labels and the 30
labels on the page are all printing properly. Any ideas? 73 John
--
EMAIL: j...@w9rpm.com
WEBPAGE: http://www.w9rpm.com/
Wisconsin VHF/UHF County Hunters:
Tom, well I hope that we can find out from someone. I have tried various
things to correct it. I am sure someone on the reflector has a fix. 73 John
On 11/8/2011 3:57 PM, Thomas Cannon wrote:
I have the same problem John, I will be interested to see how to get
over this.
Tom G0VQR / M0AAA /
John - exactly what do you mean by partial ones? Is the bottom of the last
one in the column being cut off? Does it show the partial ones when you do
a preview?
73, Bud N7CW
On Tue, Nov 8, 2011 at 4:39 PM, W9RPM j...@w9rpm.com wrote:
Tom, well I hope that we can find out from someone. I
I had same problem long time ago. I remember it was an easy fix, I think as
follows; Open DX4WIN and bring up QSO box, click on labels, click on print
qsl labels, click on edit. Brings up the label editor. If dimensions are
greyed out clock on copy. Adjust dimensions and labels per sheet to fit
Dimension of the label is too big. Printer can not print there. This is why
you have partial printing. You should play a little with the label height.
Remember that vert Pitch says to printer how far is the top of the first
label from the top of the next one. I think you should use smaller
- Forwarded Message -
From: Mike Streeter wm...@yahoo.com
To: j...@w9rpm.com j...@w9rpm.com
Sent: Wednesday, November 9, 2011 1:10 AM
Subject: Re: [Dx4win] Labels
Label name = Custom1
Label width = 2.625, Height = 1.000
Horz pitch = 2.750, Vert pitch = 1.000
Spacing left = 0.188,
9 matches
Mail list logo
