On Tue, Nov 26, 2013 at 9:16 AM, radio...@frontiernet.net
radio...@frontiernet.net wrote:
Hello Jim,
I don't remember if I reported this earlier or not but when using DX4WIN
8.05 with the Flex Radio 6500 SSDR V1.0.0 I have the following behavior
that I'm hoping DX4WIN can resolve? The
On Tue, Nov 26, 2013 at 12:23 PM, Hans Thorgren h...@thorgren.se wrote:
Hello,
I haven´t solved how to connect my IC7410 to DX4WIN. The suggestions I
have got dosen´t work. The address must be two letters or numbers not three
so 80H doesn´t work
80H means 80 Hexadecimal. (as does 0x80).
I have my IC-7410 working with a USB cable only between radio and PC. No
CI-V cable. I click on a spot and rig changes to that freq. If I tune
around and stop on a freq, eventually DX4Win displays the frequency. My
setup parameters are:
Type - ICOM 756
Address - 80
Baud Rate - 1200
Com
That is it Hans.follow these as a guide and you are there.
Thank you Bob.
Best regards,
Doug
- Original Message -
From: b...@n2scj.net
To: DX4WIN dx4win@mailman.qth.net
Sent: Tuesday, November 26, 2013 9:16 PM
Subject: Re: [Dx4win] IC7410 agn
I have my IC-7410 working with a
I have been using DX4WIN version 6.03 with Windows XP and Vista for some years
without any problems. Now I have Windows 8.1 and I have tried to load the
program from the disc and get the message port driver not found. In the FAQ
section of the help files it says to refer to the Appendix files
I'm sure this is an old topic...
After importing ADIF files from several contests, all of which were operated
QRP, I see the QRP flag is set to N.
Is there an easy way to do a mass update of that one field in all QSOs since a
given date?
Thanks,
Bob - K2UT
F8
Enter beginning date
Hit enter
DX4WIN will ask for Date Range
QSO pull down menu
Select multiple QSO operations
Select Set QRP
All QSO's in the selected date range will be changed to QRP
73, Art W6KY
www.w6ky.com
7 matches
Mail list logo