This happens to me too. But, in my case, it is because my preferences are
set to not display band/mode combinations which are already confirmed (even
lower than gray). I'll see the spot in the spot window, but when it comes
back from the PacketCluster, it disappears.
Could this be the case here?
John, K2CIB
- Original Message -
From: Donald McCoy [EMAIL PROTECTED]
To: dx4win-digest dx4win@mailman.qth.net
Sent: Wednesday, December 03, 2003 9:57 PM
Subject: [Dx4win] Spot Xfer/Vanish!?
Lately when I spot a DX station on the Packet window it comes up fine. BUT
most times it does not go to the DX Spots by Time window. NOW, I have seen
it go to the By Time window and then DISAPPEAR!! Honest! It had worked
fine on KØMP cluster here in Metro Denver but KØMP shut down about 6
months
ago. (Actually when KØMP was out of town he would shut down the backbone
and
then spots did not transfer. He did that so it would not hang up the
system
in case of trouble while he was gone.) I then joined N7US cluster which
is
in AZ. Jim, N7US and I discussed this problem and he says it is probably a
DX4WIN anomaly. Jim said he checked his end and it looks fine. I am
running
DX4WIN Ver 4.05 with a WIN 98SE program. I have checked my preference
settings and read the info on Packet in both my Ver. 1.11 and Ver. 4.0
manuals and did not see any references made to this problem.
Any help appreciated!
73,
Don WØDM
Littleton, CO
___
Dx4win mailing list
Dx4win@mailman.qth.net
http://mailman.qth.net/mailman/listinfo/dx4win
