[Dx4win] Packet window and WWV
Hi Mike, I use this command on the AC0X cluster. SH/WW/5 or SHOW/WWV/5 if you want eh whole string. That will show you 5 lines. The Cluster software does not like sh/w it needs at least sh/ww 73, John K0TG [EMAIL PROTECTED] wrote: Hi All; RE: Packet window and WWV (A and K numbers) Help please. When I select 2 WWV, I get the following messages SH/W command Error No Help Available What am I doing wrong? When I select Packet function keys, it shows the following command string WWV| SH/W/2%M Is that correct? 73s Michael WG0M Best regards, Michael Gulbranson CleanAir Technologies, Inc. www.cleanairtec.com Minnetonka, MN Tel: 952-544-9152 Fax: 952-545-2449 ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] PSK31 and FT1000MP MKV FIELD
Hi folks: Is anyone using an FT1000MP MARKV FIELD on PSK31 with DX4WIN? If so, I would love to know how you have the FT1000 configured. I am trying to configure the FT1K and I have some questions. My main problem has to do with radio behavior when using the CENTER RADIO feature. thanks, 73 ed N9EP (n9ep AT amsat.org)
[Dx4win] PSK31 and FT1000MP MKV FIELD
Milan, FT1000MP can't be set for PKT/USB either. I had to use SSB/USB mode and inject PSK31 audio into the microphone input instead in the packet input connector(otherwise would have to re-calculate PSK31 frequencies on each band) ! 73, Radi F6GNZ -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Milan G?tter Sent: Monday, January 03, 2005 6:00 PM To: Ed Picha; Dx4win@mailman.qth.net Subject:RE: [Dx4win] PSK31 and FT1000MP MKV FIELD Ed, the DX4WIN and YAESU MARK-V works not good. When using LSB / PKT for PSK31, the Center Radio ALT+R works in opposite way. (I'am unable to set MARK-V for PKT and USB. Only to SSB/USB and PSK31, but this works with large filter only, no narrow filter is possible). In this point (filter / mode combination) the FT-1000MP was much better. I was asking for correction since 5.01 version, but without success. My opinion is that the PSK31 with the DX4WIN is not so good (less sensitive) with comparison to MixW or WinWarbler. 73 Milan, OK1FM -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Ed Picha Sent: Monday, January 03, 2005 2:24 PM To: Dx4win@mailman.qth.net Subject: [Dx4win] PSK31 and FT1000MP MKV FIELD Hi folks: Is anyone using an FT1000MP MARKV FIELD on PSK31 with DX4WIN? If so, I would love to know how you have the FT1000 configured. I am trying to configure the FT1K and I have some questions. My main problem has to do with radio behavior when using the CENTER RADIO feature. thanks, 73 ed N9EP (n9ep AT amsat.org) ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win --- P??choz? zpr?va neobsahuje viry. Zkontrolov?no antivirov?m syst?mem AVG (http://www.grisoft.cz). Verze: 6.0.824 / Virov? b?ze: 562 - datum vyd?n?: 28.12.2004 ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] QSL Flag
I am trying to export the more recent part of my log to LOTW. I read that having the QSL flag set to ?Ignore? can cause problems. How can I change the flag to something else without doing them all manually? Any suggestions on what the flag should default to, in the future? 73, Buddy/K4CJB
[Dx4win] Labelprinting
Hallo I have just got a new printer. hp color 2550L. When I am printing labels, 7 down, 2 rows, the pw is ok 7 down but it only print 5 down. I remember the same problem with HP1100, a new printerfile solved the problem. I have DX4WIN ver 6.03. Anyone that had the same problem? The printerdriver or a glitch in DX4WIN ? 73 de Mats/SM7DXQ From [EMAIL PROTECTED] Mon Jan 3 17:48:43 2005 From: [EMAIL PROTECTED] (Kostas SV1DPI) Date: Mon Jan 3 17:52:56 2005 Subject: [Dx4win] PSK31 and FT1000MP MKV FIELD References: [EMAIL PROTECTED] Message-ID: [EMAIL PROTECTED] My mark v works fine. when you press and hold the PKT button then the mark v turns to user mode. the bad thing is that the lamps pkt+lsb are still on same as before, but really it is in user mode. then in menu 8-6 set the last choise EASY-SET to SSTV-U. The manual is not so good on these things.. the site www.va3cr.net has the above solution and it works fine. Search for psk settings and voila... the direct link is http://www.va3cr.net/settings%20and%20troubleshooting/AFSK%20%20soundcard%2 0setup%20with%20Ft1000mp.html Kostas SV1DPI From: Radivoj KAR [EMAIL PROTECTED] To: 'Milan G?tter' [EMAIL PROTECTED] Cc: Dx4win@mailman.qth.net Sent: Monday, January 03, 2005 9:36 PM Subject: RE: [Dx4win] PSK31 and FT1000MP MKV FIELD Milan, FT1000MP can't be set for PKT/USB either. I had to use SSB/USB mode and inject PSK31 audio into the microphone input instead in the packet input connector(otherwise would have to re-calculate PSK31 frequencies on each band) ! 73, Radi F6GNZ -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Milan G?tter Sent: Monday, January 03, 2005 6:00 PM To: Ed Picha; Dx4win@mailman.qth.net Subject: RE: [Dx4win] PSK31 and FT1000MP MKV FIELD Ed, the DX4WIN and YAESU MARK-V works not good. When using LSB / PKT for PSK31, the Center Radio ALT+R works in opposite way. (I'am unable to set MARK-V for PKT and USB. Only to SSB/USB and PSK31, but this works with large filter only, no narrow filter is possible). In this point (filter / mode combination) the FT-1000MP was much better. I was asking for correction since 5.01 version, but without success. My opinion is that the PSK31 with the DX4WIN is not so good (less sensitive) with comparison to MixW or WinWarbler. 73 Milan, OK1FM -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Ed Picha Sent: Monday, January 03, 2005 2:24 PM To: Dx4win@mailman.qth.net Subject: [Dx4win] PSK31 and FT1000MP MKV FIELD Hi folks: Is anyone using an FT1000MP MARKV FIELD on PSK31 with DX4WIN? If so, I would love to know how you have the FT1000 configured. I am trying to configure the FT1K and I have some questions. My main problem has to do with radio behavior when using the CENTER RADIO feature. thanks, 73 ed N9EP (n9ep AT amsat.org) ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win --- P??choz? zpr?va neobsahuje viry. Zkontrolov?no antivirov?m syst?mem AVG (http://www.grisoft.cz). Verze: 6.0.824 / Virov? b?ze: 562 - datum vyd?n?: 28.12.2004 ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] PSK31 and FT1000MP MKV FIELD
This is the kind of information that is needed in an appendix or user guide for DX4WIN... John, K2CIB - Original Message - From: Kostas SV1DPI [EMAIL PROTECTED] To: REFLECTOR dx4win dx4win@mailman.qth.net Sent: Monday, January 03, 2005 5:48 PM Subject: Re: [Dx4win] PSK31 and FT1000MP MKV FIELD My mark v works fine. when you press and hold the PKT button then the mark v turns to user mode. the bad thing is that the lamps pkt+lsb are still on same as before, but really it is in user mode. then in menu 8-6 set the last choise EASY-SET to SSTV-U. The manual is not so good on these things.. the site www.va3cr.net has the above solution and it works fine. Search for psk settings and voila... the direct link is http://www.va3cr.net/settings%20and%20troubleshooting/AFSK%20%20soundcard%2 0setup%20with%20Ft1000mp.html Kostas SV1DPI From: Radivoj KAR [EMAIL PROTECTED] To: 'Milan G?tter' [EMAIL PROTECTED] Cc: Dx4win@mailman.qth.net Sent: Monday, January 03, 2005 9:36 PM Subject: RE: [Dx4win] PSK31 and FT1000MP MKV FIELD Milan, FT1000MP can't be set for PKT/USB either. I had to use SSB/USB mode and inject PSK31 audio into the microphone input instead in the packet input connector(otherwise would have to re-calculate PSK31 frequencies on each band) ! 73, Radi F6GNZ -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Milan G?tter Sent: Monday, January 03, 2005 6:00 PM To: Ed Picha; Dx4win@mailman.qth.net Subject: RE: [Dx4win] PSK31 and FT1000MP MKV FIELD Ed, the DX4WIN and YAESU MARK-V works not good. When using LSB / PKT for PSK31, the Center Radio ALT+R works in opposite way. (I'am unable to set MARK-V for PKT and USB. Only to SSB/USB and PSK31, but this works with large filter only, no narrow filter is possible). In this point (filter / mode combination) the FT-1000MP was much better. I was asking for correction since 5.01 version, but without success. My opinion is that the PSK31 with the DX4WIN is not so good (less sensitive) with comparison to MixW or WinWarbler. 73 Milan, OK1FM -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Ed Picha Sent: Monday, January 03, 2005 2:24 PM To: Dx4win@mailman.qth.net Subject: [Dx4win] PSK31 and FT1000MP MKV FIELD Hi folks: Is anyone using an FT1000MP MARKV FIELD on PSK31 with DX4WIN? If so, I would love to know how you have the FT1000 configured. I am trying to configure the FT1K and I have some questions. My main problem has to do with radio behavior when using the CENTER RADIO feature. thanks, 73 ed N9EP (n9ep AT amsat.org) ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win --- P??choz? zpr?va neobsahuje viry. Zkontrolov?no antivirov?m syst?mem AVG (http://www.grisoft.cz). Verze: 6.0.824 / Virov? b?ze: 562 - datum vyd?n?: 28.12.2004 ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win