[Dx4win] DX4Win 7.02.13 - MMTTY/FSK - MicroHam Keyer?
Jim, Solved it: I was trying to assign the RTTY port (COM7) in the DX4Win MMTTY window (alt-S). That is not needed as the port is opened by MMTTY. Works OK now. Still wondering why the RTTY control window (waterfall and scope) does not stay on top if any other window is activated (I have to click the task panel to bring it visible). However, when DX4Win is minimized, the RTTY control window stays on top of the application window below (like Outlook). Not a big issue but I think it should not behave like this. Thanks 73 Erkki OH2BF -Original Message- From: Jim Reisert AD1C [mailto:[EMAIL PROTECTED] Sent: 16. toukokuuta 2006 19:23 To: Erkki Heikkinen; Dx4win@mailman.qth.net Cc: [EMAIL PROTECTED] Subject: Re: [Dx4win] DX4Win 7.02.13 - MMTTY/FSK - MicroHam Keyer? I'm not in front of the radio, but I do have a copy of DX4WIN here. First, make sure that MMTTY works stand-alone with microKeyer. In DX4WIN preferences - RTTY: - Type should be None - COM Port is your PTT port (might not be used) - MMTTY Executable is full path to, and including, mmtty.exe That should be all you need to do. Window - MMTTY should bring up two windows: the RTTY input/output window, and a small MMTTY window. 73 - Jim AD1C -- Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863 USA +978-251-9933, [EMAIL PROTECTED], http://www.ad1c.us
[Dx4win] Packet window problem
I had previously reported a problem with the packed window closing when I maximized my home page for e-mail and such. I had downloaded just the update file for the upgrade from Guy's site to keep from doing a complete install for the -13 fix. When I downloaded and installed the complete install file for the -14 fix, the problem went away? 73 BILL-W5VW ___ No banners. No pop-ups. No kidding. Make My Way your home on the Web - http://dell.myway.com
[Dx4win] Be very carefull 7.02 13 or 7.02 14
John, Thanks for sending your log; it revealed the problem immediately. I took the afternoon off so I can fix this problem. I will upload a new version as soon as it is complete. --Paul At 08:51 PM 5/16/2006, Paul van der Eijk wrote: John, Would you mind sending me your log (before import) and the ADIF file that causes the bad confirmations with an indication what QSOs were incorrectly flagged as confirmed. In a zip file would be best. Information in your log is only modified when the field was empty; if the values (like US state) are different, a note is added to the notes for the QSO, but the original value is not changed. If you observe something different, I consider this a bug that needs to be fixed. --Paul At 06:19 PM 5/16/2006, you wrote: Just a heads up, and I am not trying to poor cold water on Paul's efforts he has responded well when an error has been found, BUT. Be very careful when running a lotwreport.Adi download into your log. Make sure you have a safe backup so that if you don't like the results you can go back. I don't believe this function is working correctly yet. I have two issues. Firstly after running the download into 7.01 my Upl Cnfm's match what the LoTW web site says exactly. Doing the exact same procedure into 7.02 v13 I end up with hundreds of extra Upl Cfm's which is total rubbish. Secondly if you try to import the QSO information into your log, it will over write your existing information and put a note in the notes for this QSO. Supposedly you should be able to do this without over writing you existing information just get the entries in the notes for this QSO field if the information is different. Well perhaps I am doing something wrong with this one but it sure looks like it works completely reverse to how the book tells it. I am going back to 7.01 and I'm going to let everyone else be the guinea pigs until the dust settles on this 7.02 fiasco. 73 John ZL1BYZ. ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win Paul van der Eijk (KK4HD) [EMAIL PROTECTED] http://www.dx4win.com Paul van der Eijk (KK4HD) [EMAIL PROTECTED] http://www.dx4win.com
[Dx4win] US Islands Award
Is anyone using DX4WIN to track the US Islands Award? W8TTS has a more recent list of islands, but he calls the award [USIA] whereas DX4WIN 7.0x calls it [USI]. If I change the name, some people's award tracking may be compromised. If I don't change the name, I will probably forget the next time Ted updates his list. Thanks 73 - Jim AD1C -- Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863 USA +978-251-9933, [EMAIL PROTECTED], http://www.ad1c.us From [EMAIL PROTECTED] Wed May 17 15:07:12 2006 From: [EMAIL PROTECTED] (J ALBU) Date: Wed May 17 15:11:48 2006 Subject: [Dx4win] Dx Alerts Message-ID: [EMAIL PROTECTED] Paul and Steve I'm using 7.02.14 When select Dx Alert to '' NONE'' system beep still ON Try a lot but Beep is allways On... 73 de Jose CT1AOZ
[Dx4win] Packet Window
Paul and Steve If unselect Show function keys in the '' Packet 1'' Options, all in the Packet window is gone, And loose the connection. 73 de Jose CT1AOZ
[Dx4win] Dx Alerts Packet window
Regarding my previous E-mails a new thing happen: Reconnecting the Telnet by hand, and (Show function keys in the '' Packet 1'' Options is still Unselected ) the Beep is Gone and all the alerts are ok as it should be . 73 de Jose CT1AOZ
FW: [Dx4win] Be very carefull 7.02 13 or 7.02 14
I hope Paul doesn't mind me forwarding this. I guess he wants as solid a build as possible for Dayton. 73 John ZL1BYZ. -Original Message- From: Paul van der Eijk [mailto:[EMAIL PROTECTED] Sent: Thursday, 18 May 2006 6:51 a.m. To: John Shaw Cc: dx4win@mailman.qth.net Subject: Re: [Dx4win] Be very carefull 7.02 13 or 7.02 14 John, Thanks for sending your log; it revealed the problem immediately. I took the afternoon off so I can fix this problem. I will upload a new version as soon as it is complete. --Paul
[Dx4win] version 7.02 build 15
Changes for build 15 1. Importing/confirming QSOs into an existing log 2. Updated award file; (Includes changes compiled by AD1C submitted by I0MWI, 9K2HN and W8TTS.) 3. Small change in dx4win.tcp file I truly hope this version is more stable and has fewer quirks. Glad to do this via the Internet. Unfortunately Steve has to burn new CDROMs for Dayton Paul van der Eijk (KK4HD) [EMAIL PROTECTED] http://www.dx4win.com
[Dx4win] DX4WIN.AWD updates
I sent a wave of DX4WIN.AWD updates to Paul. I will upload the new DX4WIN.AWD file on my web site tonight. If you download DX4WIN 7.02 build 15, you will get the new awards file. DX4WIN 7.01/7.02 contained 124 awards. This release contains 129 awards: Added: [ARLHS] Amateur Radio Lighthouse Society [DCS] Castelli Sammarinesi [DIFM] French Island Award [EWWA] European World Wide Award [WLHA] World Lighthouses On The Air Updated: [CISA] Canadian Islands Award [IIA] Italian Isl Award [IOSA] Islands of Scotland Award [JCC] Japan Century Cities [JCG] Japan Century Guns [KDN] Korean District Number [ROBI] Russian Robinson [USIA] U.S. Islands Award (formerly [USI]) [WAIP] Italian Provinces Fixed: - bands in a number of awards Big thanks to Stefano, I0MWI; Ted W8TTS; Hamad 9K2HN If there are any problems, corrections, let me know. 73 - Jim AD1C -- Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863 USA +978-251-9933, [EMAIL PROTECTED], http://www.ad1c.us From [EMAIL PROTECTED] Wed May 17 18:22:17 2006 From: [EMAIL PROTECTED] (Richard Zalewski) Date: Wed May 17 18:26:45 2006 Subject: [Dx4win] 7.01 to 7.02 Message-ID: [EMAIL PROTECTED] Packet window is greyed out. I have selected tcp/ip. -- Tnx es 73 Dick W7ZR www.w7zr.com From [EMAIL PROTECTED] Wed May 17 18:23:11 2006 From: [EMAIL PROTECTED] (Garry Shapiro) Date: Wed May 17 18:27:29 2006 Subject: [Dx4win] Another problem? In-Reply-To: [EMAIL PROTECTED] Message-ID: [EMAIL PROTECTED] Paul: Here is a potential problem that I have not seen mentioned, but which appears to be correlated with 7.02. While composing emails in Outlook (2000), the message window frequently deselects, even in the midst of typing. Clicking in the window restores selection--until it again deselects. This does not occur if DX4WIN is not open at the same time! I am using build 14. I am getting ready to depart for Dayton and have not had the time to investigate further, e.g. does this occur if packet spotting is inactive or not? I won't be able to do any more work on this until after Dayton. Garry, NI6T
[Dx4win] Another problem?
--- Garry Shapiro [EMAIL PROTECTED] wrote: While composing emails in Outlook (2000), the message window frequently deselects, even in the midst of typing. Clicking in the window restores selection--until it again deselects. This does not occur if DX4WIN is not open at the same time! I am using build 14. Hi Garry, I have not heard of this problem before. It sounds like DX4WIN might be stealing focus when spots come in. I don't have this problem, but I'm using a PowerToy from Microsoft called TweakUI. I have it set up so that whatever window the mouse pointer is in has focus. You can download TweakUI from: http://www.microsoft.com/windowsxp/downloads/powertoys/xppowertoys.mspx 73 - Jim AD1C -- Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863 USA +978-251-9933, [EMAIL PROTECTED], http://www.ad1c.us From [EMAIL PROTECTED] Wed May 17 18:41:01 2006 From: [EMAIL PROTECTED] (Jim Reisert AD1C) Date: Wed May 17 18:45:29 2006 Subject: [Dx4win] 7.01 to 7.02 In-Reply-To: [EMAIL PROTECTED] Message-ID: [EMAIL PROTECTED] --- Richard Zalewski [EMAIL PROTECTED] wrote: Packet window is greyed out. I have selected tcp/ip. Did you also set type to regular? You should have imported your settings from 7.01 into 7.02 which I told you about earlier. - Jim -- Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863 USA +978-251-9933, [EMAIL PROTECTED], http://www.ad1c.us From [EMAIL PROTECTED] Wed May 17 19:32:26 2006 From: [EMAIL PROTECTED] (Jim Reisert AD1C) Date: Wed May 17 19:36:54 2006 Subject: [Dx4win] DX4WIN.AWD version 1.3 released Message-ID: [EMAIL PROTECTED] NOTE: this is the same version in DX4WIN 7.02 build 15 I have released an updated DX4WIN.AWD file. Many thanks to I0MWI, 9K2HN and W8TTS for their contributions. You can download the file from: http://dx4win.ad1c.us/#Award Here are the release notes, previously published: DX4WIN 7.01/7.02 contained 124 awards. This release contains 129 awards: Added: [ARLHS] Amateur Radio Lighthouse Society [DCS] Castelli Sammarinesi [DIFM] French Island Award [EWWA] European World Wide Award [WLHA] World Lighthouses On The Air Updated: [CISA] Canadian Islands Award [IIA] Italian Island Award [IOSA] Islands of Scotland Award [JCC] Japan Century Cities [JCG] Japan Century Guns [KDN] Korean District Number [ROBI] Russian Robinson [USIA] U.S. Islands Award (formerly [USI]) [WAIP] Italian Provinces Fixed: bands in a number of awards As always, I welcome additions and corrections. 73 - Jim AD1C -- Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863 USA +978-251-9933, [EMAIL PROTECTED], http://www.ad1c.us
[Dx4win] DX4WIN.AWD - side effect of prefix changes
Hi Folks, Rod WC7N accidentally discovered an unfortunate side-effect of the prefix changes in the DX4WIN.AWD file. These changes were a result of needing the award prefixes to match the country file prefixes. Otherwise, when selecting eligible awards, the award might not be considered valid for the old prefix. For all custom awards, DX4WIN saves the award abbreviation (i.e. USIA) and the award value (i.e. AK020) in the logbook along with the QSO. Some awards have sequential value codes (like USIA), others use the entity prefix as the award value. If you are tracking a custom award like WAE-CW, that uses the prefix as the award value, the prefix change in the .AWD file can result in the QSO value no longer matching the award value (i.e. the log says 4K2, but the award file says R1F). There is no automated way to fix this. You will have to print out your old (working) custom award status and your new custom award status. If an entry comes up as Unknown, find the QSO and change the Custom Award value field to the correct name. Save the QSO and repeat for each incorrect entry. If this is too much, the best way is to send me your .DXL and DX4WIN.CTY files, and I'll make the change for you. There is a way to fix this, but it makes the award file look like a hybrid of old and new prefixes. I'd rather maintain only one version of the award file, not two. Sorry about that! 73 - Jim AD1C p.s. the affected prefixes are (format is OLD, NEW): { 3B6, 3B7 }, { 3X, 3XA }, { 4J1, R1M }, { 4K2, R1F }, { 4W, 4W/D }, { 4W1, 4W }, { BS7, BS7H }, { BV9, BV9P }, { CE0A, CE0Y }, { EM, UT }, { FO/C, FO0 }, { FT/W, FT5W }, { FT/X, FT5X }, { FT/Z, FT5Z }, { IS, IS0 }, { JD/M, JD1/M }, { JD/O, JD1/O }, { K, W }, { KC6, T8 }, { KH7, KH7K }, { PJ5, PJ7 }, { PY0P, PY0S }, { SY, SV/A }, { UK, UJ }, { VK9Z, VK9W }, { VR2, VR }, { VU7/A, VU4 }, { VU7/L, VU7 }, { ZB, ZB2 }, { P2/G, VK9/T }, { P2/P, VK9/P }, { VS9A, 7O/D }, { Y2, DM } -- Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863 USA +978-251-9933, [EMAIL PROTECTED], http://www.ad1c.us