[Dx4win] Cannot Connect to Clusters via Internet

2016-05-21 Thread Frank Grossman 
Good afternoon:

I am reactivating on HF after about 10 years off, so I am setting up DX4WIN
on my Win-7 computer. The packetcluster connection does not weem to be
working. I've set tcp/ip as the port, and tried selecting both Web and
Telnet services from the file. No joy. Do I need other protocol settings?
Change something in my firewall or my WiiFi?

Any thoughts?

73,
Frank
WB2BXO
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] DX4WIN and SteppIR?

2016-05-21 Thread N4QS, Dave Perry 
Dennis,

I think I also had to wire a special serial cable to make it all work
properly.  It seemed like the wiring diagram was provided in the help
section of DX4WIN.

Dave, N4QS


-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of N4QS, Dave
Perry
Sent: Saturday, May 21, 2016 11:17 AM
To: 'Dan Violette'; 'RadioDen45'; 'Alan Zack'; 'Paul van der Eijk'
Cc: dx4win@mailman.qth.net
Subject: Re: [Dx4win] DX4WIN and SteppIR?

Dennis,

I used to have a Steppir and it worked very well with DX4WIN.  You have to
go into the Control tab of preferences in DX4WIN and enable the Steppir
functions.  Then you have to go into the menu system of the SDA100 and setup
the controller so that it will track the radio.  It has been a while, but I
think you had to select Kenwood as the radio type.  Once you have the
controller setup correctly, then you have to enable Auto Track on the front
panel of the controller.  It should then retune as the radio changes
frequency every 25 khz.

73,

Dave, N4QS



-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Dan
Violette
Sent: Saturday, May 21, 2016 11:06 AM
To: 'RadioDen45'; 'Alan Zack'; 'Paul van der Eijk'
Cc: dx4win@mailman.qth.net
Subject: Re: [Dx4win] DX4WIN and SteppIR?

I have DX4WIN at home and SteppIR at work club so could not answer direct
with that combo.  As long as DX4WN is following your radio OK then you "Y"
the SDA-100 from the same serial line and it listens in and sets itself too.
See:  http://www.steppir.com/wp-content/uploads/2011/10/Y-Cable.pdf
Dan KI6X

-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of RadioDen45
Sent: Saturday, May 21, 2016 6:43 AM
To: Alan Zack ; 'Paul van der Eijk' 
Cc: dx4win@mailman.qth.net
Subject: [Dx4win] DX4WIN and SteppIR?

Hello all you out there in radio land,

I'm trying to setup V8.05 of DX4WIN to control my 3ele Steppir beam, I have
followed the HELP files but NO JOY.  Is any one out there controlling their
SteppIR with DX4WIN?  I'm using the SDA-100 controller...

Thanks in advance for any help.

Dennis, k0eoo 

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] DX4WIN and SteppIR?

2016-05-21 Thread N4QS, Dave Perry 
Dennis,

I used to have a Steppir and it worked very well with DX4WIN.  You have to
go into the Control tab of preferences in DX4WIN and enable the Steppir
functions.  Then you have to go into the menu system of the SDA100 and setup
the controller so that it will track the radio.  It has been a while, but I
think you had to select Kenwood as the radio type.  Once you have the
controller setup correctly, then you have to enable Auto Track on the front
panel of the controller.  It should then retune as the radio changes
frequency every 25 khz.

73,

Dave, N4QS



-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Dan
Violette
Sent: Saturday, May 21, 2016 11:06 AM
To: 'RadioDen45'; 'Alan Zack'; 'Paul van der Eijk'
Cc: dx4win@mailman.qth.net
Subject: Re: [Dx4win] DX4WIN and SteppIR?

I have DX4WIN at home and SteppIR at work club so could not answer direct
with that combo.  As long as DX4WN is following your radio OK then you "Y"
the SDA-100 from the same serial line and it listens in and sets itself too.
See:  http://www.steppir.com/wp-content/uploads/2011/10/Y-Cable.pdf
Dan KI6X

-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of RadioDen45
Sent: Saturday, May 21, 2016 6:43 AM
To: Alan Zack ; 'Paul van der Eijk' 
Cc: dx4win@mailman.qth.net
Subject: [Dx4win] DX4WIN and SteppIR?

Hello all you out there in radio land,

I'm trying to setup V8.05 of DX4WIN to control my 3ele Steppir beam, I have
followed the HELP files but NO JOY.  Is any one out there controlling their
SteppIR with DX4WIN?  I'm using the SDA-100 controller...

Thanks in advance for any help.

Dennis, k0eoo 

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] DX4WIN and SteppIR?

2016-05-21 Thread Dan Violette 
I have DX4WIN at home and SteppIR at work club so could not answer direct
with that combo.  As long as DX4WN is following your radio OK then you "Y"
the SDA-100 from the same serial line and it listens in and sets itself too.
See:  http://www.steppir.com/wp-content/uploads/2011/10/Y-Cable.pdf
Dan KI6X

-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of RadioDen45
Sent: Saturday, May 21, 2016 6:43 AM
To: Alan Zack ; 'Paul van der Eijk' 
Cc: dx4win@mailman.qth.net
Subject: [Dx4win] DX4WIN and SteppIR?

Hello all you out there in radio land,

I'm trying to setup V8.05 of DX4WIN to control my 3ele Steppir beam, I have
followed the HELP files but NO JOY.  Is any one out there controlling their
SteppIR with DX4WIN?  I'm using the SDA-100 controller...

Thanks in advance for any help.

Dennis, k0eoo 

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] DX4WIN and SteppIR?

2016-05-21 Thread RadioDen45 

Hello all you out there in radio land,

I'm trying to setup V8.05 of DX4WIN to control my 3ele Steppir beam, I have 
followed the HELP files but NO JOY.  Is any one out there controlling their 
SteppIR with DX4WIN?  I'm using the SDA-100 controller...


Thanks in advance for any help.

Dennis, k0eoo 


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html