Re: [Dx4win] Expert mode and DX Doubler
Dave, In Windows Device Manager -> Ports (COM & LPT) you associate a Legacy LPT Port Number (LPT1, LPT2, or LPT3) with your PCIe LPT port (Port Settings tab for that port). While N1MM+ uses the port address from the Resources tab, DX4win uses the Legacy Port Number (LPT1, LPT2, or LPT3) to identify the LPT port for radio 1/2 signal (Parameters -> CW). 73, ... Joe, W4TV On 2018-12-17 10:26 PM, N4QS, Dave Perry wrote: Alan, I did have to install the lptdriver as you suggested, but I also had to reset the LPT port address in N1MM+ to match the address for the new PCIe card. The DXD works fine now in N1MM, but I can't see a way to change the address in DX4WIN. I have emailed Paul. Thanks for the assist. 73, Dave - N4QS -Original Message- From: Alan Walters Sent: Sunday, December 16, 2018 3:18 PM To: n...@vci.net; dx4win@mailman.qth.net Subject: RE: [Dx4win] Expert mode and DX Doubler Dave, I too am using my DX Doubler with 9.0.4 with Win7. I wonder if you have installed the lptdriver? Assuming you installed DX4W directly in C: drive, you will find this at C:/dx4w/drivers/lptdriver. Al, K5NOF -Original Message- From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of n...@vci.net Sent: Sunday, December 16, 2018 12:51 PM To: dx4win@mailman.qth.net Subject: [Dx4win] Expert mode and DX Doubler I am trying to reinstall my legacy DX Doubler SO2R box with DX4WIN ver 9.0.4. It used to work great under version 8.5. When I go to Preferences, Control tab, I cannot change the Type or LPT1 port under Band Decoder. With version 9.04, the type is grayed out as None under Band decoder. As I recall, you used to have to go into the Personal tab to turn on expert mode to change this, but that is no longer available. Is Top Ten Devices using a LPT port still supported in Version 9? And can anyone tell me what happened to Expert Mode? Thanks, Dave, N4QS __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net Message delivered to arch...@mail-archive.com This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Expert mode and DX Doubler
Alan, I did have to install the lptdriver as you suggested, but I also had to reset the LPT port address in N1MM+ to match the address for the new PCIe card. The DXD works fine now in N1MM, but I can't see a way to change the address in DX4WIN. I have emailed Paul. Thanks for the assist. 73, Dave - N4QS -Original Message- From: Alan Walters Sent: Sunday, December 16, 2018 3:18 PM To: n...@vci.net; dx4win@mailman.qth.net Subject: RE: [Dx4win] Expert mode and DX Doubler Dave, I too am using my DX Doubler with 9.0.4 with Win7. I wonder if you have installed the lptdriver? Assuming you installed DX4W directly in C: drive, you will find this at C:/dx4w/drivers/lptdriver. Al, K5NOF -Original Message- From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of n...@vci.net Sent: Sunday, December 16, 2018 12:51 PM To: dx4win@mailman.qth.net Subject: [Dx4win] Expert mode and DX Doubler I am trying to reinstall my legacy DX Doubler SO2R box with DX4WIN ver 9.0.4. It used to work great under version 8.5. When I go to Preferences, Control tab, I cannot change the Type or LPT1 port under Band Decoder. With version 9.04, the type is grayed out as None under Band decoder. As I recall, you used to have to go into the Personal tab to turn on expert mode to change this, but that is no longer available. Is Top Ten Devices using a LPT port still supported in Version 9? And can anyone tell me what happened to Expert Mode? Thanks, Dave, N4QS __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net Message delivered to abwl...@aol.com This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net Message delivered to arch...@mail-archive.com This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Spots filtering by using Membership list
Sorry for previous missed text. I would like add one more argument. The rules have been changed: "Paper QSL cards may not be combined with LoTW applications anymore for the DXCC award program. (Hybrid application). The hybrid application process is still available for the WAS and VUCC programs. All QSLs, whether confirmed in LoTW or with paper QSL card are eligible for your DXCC award however the application processes are seperate. Effective April 2, 2012 the 3 methods of applying for DXCC are: a.. Traditional Paper Card b.. Online DXCC c.. LogBook of The World (LoTW)" This is one more reason why this would help, especially when "Warning messages" are in use. 73's Vigis LY2CX - Original Message - From: "LY2CX" To: Sent: Tuesday, December 04, 2018 3:57 PM Subject: Spots filtering by using Membership list Hi All Users of the greatest software ! I'm back to the reflector after long time with one suggestion. It would be great ( I think) to use Membership List "Memb" data filed letters ( L, E, ect.) for spots filtering. E.g. I would like to see only those spots who are LOTW group members (Memb = L), or some other group members - may be for some short time, or for some special award with a list of calls. I do not know how big work for Paul this could be. But this would be a great future and would add more flexibility in the spots filtering and would increase the usage of Membership list functionality. Or may be it's already there and I'm little back with my knowledge. 73's Vigis LY2CX DX4WIN starts together with the radio ! __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net Message delivered to arch...@mail-archive.com This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Spots filtering by using Membership list
I would like add one more argument. The rules have been changed: - Original Message - From: "LY2CX" To: Sent: Tuesday, December 04, 2018 3:57 PM Subject: Spots filtering by using Membership list Hi All Users of the greatest software ! I'm back to the reflector after long time with one suggestion. It would be great ( I think) to use Membership List "Memb" data filed letters ( L, E, ect.) for spots filtering. E.g. I would like to see only those spots who are LOTW group members (Memb = L), or some other group members - may be for some short time, or for some special award with a list of calls. I do not know how big work for Paul this could be. But this would be a great future and would add more flexibility in the spots filtering and would increase the usage of Membership list functionality. Or may be it's already there and I'm little back with my knowledge. 73's Vigis LY2CX DX4WIN starts together with the radio ! __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net Message delivered to arch...@mail-archive.com This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html