Larry, In Ver 6.0x, you have to geo into Preferences and Control and
switch the configuration from CW to PSK31 PTT and back and forth depending
on the mode you are using at the moment. In Ver. 5.02/03 the PTT keying port
was selectable in the PSK31 window. Now its a real pain to switch between
Doesn't work when CW is on the rig control port and PSK31 uses a different
port. May work with LPT poet but not with different serial ports...
-=Rog-K9RB=-
- Original Message -
From: Martin De Craemer [EMAIL PROTECTED]
To: dx4win@mailman.qth.net
Sent: Sunday, October 26, 2003 12:41 PM
One way that I've handled this potential for missing needed ones is to read
all the latest DX bulletins. When you come across an announcement that
interests you with a callsign that could be an entity of various defaults,
put that callsign in the log window, go to the Prefix box and hit F1 to
Not at all, Jim. Ink jet print is water soluble and will instantly smear or
smudge if subjected to a droplet of water. It also fades quite rapidly.
Laser printers fuse the toner to the media under a high heat, which sets the
print and makes it impervious to moisture and fading. Laser printers have
Yes, Larry, I share this dilemma with you and any others that work CW and
PSK31 modes and use different ports for control of CW keying and PSK31 PTT.
I brought this problem to the attention of Paul just days after the release
of Ver 6...
It is a real pain now and was so simple in Ver. 5.02/5.03
I don't use LPT port as early on I found that CW doesn't work as well as
with COM port.
I use COM 3 for rig control and also CW keying, COM 5 is dedicated for PTT
w/PSK31
RigBlaster is commonplace with PSK31 and requires use of a separate COM port
for PTT
Rig control and CW keying work well on the
In Preferences | Packet1 | make sure you have the options box labeled
Backup DX spots checked. That will save the spots up to the number in the
Preferences | Packet2 | scrollback capacity for DX spots box.
73, -=Rog-K9RB=-
Sure wish the separate COM port selection for PSK31 PTT and CW keying are
I have again updated the DX4WIN.tcp file, which contains all the Telnet =
connection choices. There have been many changes in addresses as well as =
many new connection choices. All currently working published and known =
worldwide telnet connections are included in this new updated file. All =
The notes for QSO box never gets seen again after the QSO is entered in the
log unless you go back and select that particular QSO for review! When printing
QSL labels, if the QSO's aren't segregated by the manager/mode, multiple QSO's
will print on the same label while they need to go to different
Send PayPal donations to; [EMAIL PROTECTED]
- Original Message -
From: Rick Tyler [EMAIL PROTECTED]
To: Roger Borowski [EMAIL PROTECTED]
Sent: Friday, January 25, 2002 11:35 AM
Subject: Re: [Dx4win] Help K3TKJ Keep QTH.NET Going
Be glad to transfer a few bucks left in my PAYPAL
10 matches
Mail list logo