-0-com is not working on W11
Delete jtdx virtual ports and try with dx4win on that virtual ports (pair)
And check if that works, if not then its related W11<>Delphi
Guy
-Original Message-
From: David Gould
Sent: Monday, November 13, 2023 1:32 PM
To: ON4AOI ; DX4WIN@mailman.qth.net
S
anymore
Guy ON4AOI
-Original Message-
From: dx4win-boun...@mailman.qth.net On Behalf
Of David Gould
Sent: Monday, November 13, 2023 11:26 AM
To: DX4WIN@mailman.qth.net
Subject: [Dx4win] DX4Win with virtual port link to Win4Yaesu suite
I have a Yaesu FTdx5000 and am using the Win4Yaesu
I have a Yaesu FTdx5000 and am using the Win4Yaesu suite to control it.
I have two virtual com ports set up with Com-0-Com. This has been
working for many years with one virtual port being used by DX4Win and
the other by JTDX. Last week the virtual port used by DX4Win stopped
working (I
iguration file
Yes, you want to replace the existing file. Then, Save changes and exit.
---
73,
Mike Cizek WØVTT
-Original Message-
From: dx4win-boun...@mailman.qth.net On Behalf
Of David Gould
Sent: Tuesday, 10 October, 2023 07:57
To: DX4WIN@mailman.qth.net
Subject: [Dx4win] Multiple
I have a new PC configuration with 3 Monitors ( which I use for general
stuff as well Radio). I am having particular trouble with DX4Win when
the PC comes back to life after a sleep/hibernation. I have 9 windows
open and some restore to the original position and some re-appear on a
different
Senta from BlueMail
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support
Hi Paul,
Not sure if any help, but having just checked on my (up-to-date) W11
machine, DX4Win starts perfectly OK with me if I double-click the
executable in File manager.
(I normally start with a desktop Icon.)
73,
Dave G3UEG
On 29/05/2023 21:48, Paul van der Eijk wrote:
Hi, I'm
a SERIAL port
To setup the radio with via serial port to DX4WIN, but make sure
You use FTDI based USB to serial cable if no serial port is available
Most of the other usb2serial is crap.
Guy ON4AOI - OT7K
-Original Message-
From: dx4win-boun...@mailman.qth.net On Behalf
Of David Gould
Sent
Everything worked smoothly with W7. The problem started with a new W10
computer which very quickly updated itself to W11 without any input from
me, so I am not absolutely sure whether the problem existed in W10 as
well as it being a problem now with W11. It is a minor nuisance rather
than a
7 band WAZ on the FT Digi
modes Happy days!
73,
Dave G3UEG
On 31/01/2023 11:16, David Gould wrote:
Hi Mike.
Thanks for the information. I have now found another similar example
on 15m Zone 32 an MFSK/FT4 qso is not being picked up by the WAZ report.
I can confirm that both the MF
.
73,
Mike Cizek W0VTT
-Original Message-
From: dx4win-boun...@mailman.qth.net On Behalf
Of David Gould
Sent: Tuesday, 31 January, 2023 04:54
To: DX4WIN Reflector
Subject: [Dx4win] My misunderstanding or a bug?
Version 9.0.9.1259
I have been using FT8 for a while, however recently
Version 9.0.9.1259
I have been using FT8 for a while, however recently, I have started
using FT4 more often. I am chasing WAS and WAZ.
I am seeing an anomaly on the WAZ report which is showing I need Zone 2
and Zone 31 on 12m. However, when I import my log file into JT Alert it
is
I am in the middle of trying to get a second monitor working on new W10
machine. I have what seems to be a common (but not universal problem)
for any windows open on the second monitor move to the first monitor
when the screen wakes up from screen save mode. (OK when I minimize /
maximise or
I want to move DX4Win from a W7 machine to a new W10 machine. Does Jim's
suggestion of just copying the complete folder work across different
operating system versions?
Or is there a better way to do it? I do have a back-up copy of my
licence file readily available.
73,
Dave G3UEG
Thanks Kostas, just what I needed.
73, Dave G3UEG
Select 60m also under file>awards> award you are interesting for
73 Kostas SV1DPI
Στις 25/9/2021 11:27, ο/η David Gould έγραψε:
I have just started using the 60m band. I have ticked the band under
File, Preferences, Station. H
I have just started using the 60m band. I have ticked the band under
File, Preferences, Station. However, the 60m band is not showing as
available for any of the reports.
Have I missed something else?
Is there any way to show 60m on any of the reports?
73,
Dave G3UEG
I use CC User to link to a cluster and then the spots are fed into
DX4Win. The issue seems to be caused by the cluster spots not having a
date (only time) or I am not picking up the date properly.
In the morning say at 09:00 when the bands are quiet and not many spots,
my DX spots window in
You can check the current situation by looking at the Queue Status
http://www.arrl.org/logbook-queue-status
It is showing about an 8 to 9 hour backlog. It is updated every hour on
or about the hour mark.
73,
Dave G3UEG
Hi,
I confirm that there is at present a problem. I have just
:
On Mon, Dec 2, 2019 at 4:08 AM David Gould G3UEG wrote:
I would like to be able to filter logbook records based on **time** as
well as just date and time. When I try I get odd results.
Yesterday I made 18 QSOs. After the first 16, I did an upload to
Clublog thinking that was it for the day
Correction to first line sorry for mistake..
I would like to be able to filter logbook records based on **time** as
well as just date. When I try I get odd results.
Yesterday I made 18 QSOs. After the first 16, I did an upload to
Clublog thinking that was it for the day. I then made 2
I would like to be able to filter logbook records based on **time** as
well as just date and time. When I try I get odd results.
Yesterday I made 18 QSOs. After the first 16, I did an upload to
Clublog thinking that was it for the day. I then made 2 more QSOs. ( I
know I can upload all
Hi Jim,
Thanks for that, Randy might find this useful as well.
73,
Dave, G3UEG
On 22/08/2019 14:42, Jim Reisert AD1C wrote:
On Thu, Aug 22, 2019 at 4:01 AM David Gould G3UEG asked:
Can anyone suggest a way to get the log data into a spreadsheet. I want
to sort the data on various
Hi Cesar,
Thanks for that, it has solved my problem.
73,
Dave G3UEG
On 22/08/2019 11:08, PY2YP wrote:
Hi Dave
Right click on the logbook window then choose save file.
73 DX de PY2YP - Cesar
On 22/08/2019 07:01, David Gould wrote:
I was surprised not to find a .csv file export option
I was surprised not to find a .csv file export option.
Can anyone suggest a way to get the log data into a spreadsheet. I want
to sort the data on various columns.
73,
Dave G3UEG
__
DX4WIN mailing list
Home:
Hi Jim,
Thanks.. That does the trick in one step.. just what I wanted. I only
use FT8 and FT4.
I appreciate your ever present knowledgeable support.
73,
Dave G3UEG
On 16/07/2019 17:42, Jim Reisert AD1C wrote:
On Tue, Jul 16, 2019 at 4:19 AM David Gould G3UEG wrote:
As far as I am
As far as I am concerned FT8 and FT4 are similar and for DXCC and slot
counting, I am happy to work stations of either of the modes.
I would like to be able to output an ADIF file for the combination of
both the FT8 and FT4 qsos (I don't use any other digital modes) Is
there a way to do this
Hi Jim,
Thanks, Yes, I do have 9.0.5.1221 across the top.
I closed DX4Win and shut down the computer before going out. When I came
back and restarted DX4Win, it worked OK, so now sorted.
73,
Dave G3UEG
On 17/06/2019 13:48, Jim Reisert AD1C wrote:
On Mon, Jun 17, 2019 at 2:31 AM David
I have just updated to 9.05.
I plan to use FT4 when the general release comes out. I tried entering
a dummy QSO and selected MFSK, I am unable to enter anything in the
sub-mode box.
Is this correct? Or is it that these entries only available when
importing logs?
73,
Dave G3UEG
I have been using FT8, but have not yet used FT4, as I thought it was
primarily a contest mode, but seems to be being used more generally.
How is FT4 mode handled when imported from WSJT-X? I intend trying it
when the first general release comes out.
73,
Dave, G3UEG
Thanks for the info. My totals now tally with clublog.
73,
Dave G3UEG
Hello Dave,
At the top of the QSO window: QSO > Mark invalid for awards If you
expand the QSO window all the way (F5), you will see "I" in all the
award boxes.
If you want to mark it invalid only for a specific
I understand QSOs with a station on a boat moored in a harbour do not
count for DXCC. (where station not signing /MM)
Is there a way to flag these QSOs as invalid? I can't find anything in
the help files (V9)
73,
Dave G3UEG
__
I have just upgraded from V7 to V9.
The QSO confirmation data has changed as I see it.
I can get those confirmed by card, those that are confirmed by LoTW, and
also those that are confirmed by card **AND** LoTW.
How do I find those QSO that are confirmed by card **OR** Lotw?
73, Dave G3UEG
I cannot find info in the help file..
What file name and where is the one which holds the list of cluster nodes?
I want to connect (easily) to VE7CC and the localhost entry is currently
is third on the list.
I want to edit the file to put it at the top.
73,
Dave, G3UEG
I am doing a trial of V9 upgrading from V7.
Most has gone OK.
The first issue I have found is that all my names that were in "Notes
for this call" have come out in V9 as gibberish
eg
V7 Walid
V9 dFOE1XFB
V7 Robert
V9 rtoIZS/MW0VOWberDBethFZS1AFS
Can I do a transfer in a
73,
Dave, G3UEG
On 12/04/2017 21:46, Jim Reisert AD1C wrote:
On Wed, Apr 12, 2017 at 4:40 AM, David Gould G3UEG wrote:
In W7 there are two folders.. Program Files and Program Files (x86) which
folder do I use?
Do not use *either* for DX4WIN. Windows 7 and beyond place much more
stringent p
As a short term measure I want to transfer my DX4WIN V7 from my Xp
machine to a W7 machine. (I will then do the upgrade to V8 a little later)
I think I have seen that I can just copy the whole folder from one
machine to the other, is this correct or does it not apply if changing
from Xp to
I am not using updater yet.
I cannot find the latest file.. the last one showing is #135 dated
31 July 2014.
Where can I find the latest file?
73,
Dave, G3UEG
At 03:27 30/08/2014, Jim Reisert AD1C wrote:
Hi Gang,
I've posted the new country file. Please run the UPDATER to get it.
I worked Z62FB (Kosovo) this afternoon.
It is not recognised by DX4Win or Clublog (There is an entry on QRZ.COM)
What is the status of Kosovo and what is the correct way to handle this QSO?
73,
Dave, G3UEG
__
DX4WIN mailing list
I am currently using V7 on an old WinXP machine.
I am installing a new computer with Win7. I also want to upgrade to V8.
I am happy to set my preferences up from scratch in V8 as I want to
play with it for a while on a dummy log.
Can I then simply export my logfile from V7 on old machine
I have just done some testing before the TX6G group get active later
in the week.
I put TX6G into DX4WIN with the latest country file.. It showed the
QSL manager at G3TXF correctly - but did not show any country code
(FO/A.), so I guess there must be an entry but is it complete/correct?
I
Is anyone else using this program with DX4Win V7.7?
Also if anyone is using V8.05 I would be interested if it works
successfully with this version?
The issues I have are as follows..
1) If I use a preset in PstRotator, when I return to DX4Win and do
F11 to move to the bearing in **THE
I use VE7CC to do an initial filter on incoming spots.
When in DX4Win is it possible to only show the higher priority spots
in the spot window..
I am ignoring gray spots already.
At times, I would like to be able to show only priority 1 - 3 or 1 -
5? (or ignore 4 - 8 or 6 - 8)
Can this
Please could you provide a bit more information..
My DX4WIn help has stopped working, so can't look there..
Where is the filter command entered?
In example below the line break is in an unfortunate position.. is
there a (space) between REJ and PSE or does it have to be a line break?
I
I am using version 7.7.2
I had spotted a few anomalies between DX4Win and Clublog, so I have
cleared my Clublog data and reloaded it totally from DX4Win.
The QSO totals look about right, but I now have a heap more anomalies
with QSO confirmations.
Most of my confirmations are from LoTW, so I
I am happy to get most of my confirmations through LoTW.
However, I have been chasing a few confirmations with direct QSLs,
most of which have been OK.
However, I have had a couple of Not in Log returns. Do people just
delete the QSO, or is there some recommended way to flag the QSO so
I had wondered the same question.. Just one follow-up.
I use the local connection (to VE7CC). Is there a way to move this
to the top of the list (currently 5th) so I can use the 3 x ENTER process.
Is there an option to clear, automatically, all the old spots when
starting a new session. If
Of David
Gould
Sent: 28 February 2012 10:12
To: dx4win@mailman.qth.net
Subject: Re: [Dx4win] packet questions new user
I had wondered the same question.. Just one follow-up.
I use the local connection (to VE7CC). Is there a way to
move this to the top of the list (currently 5th) so I
the function key is not needed to press enter after...
73 Kostas sv1dpi
- Original Message -
From: David Gould d...@g3ueg.co.uk
To: Kjell W. Strom strom.l...@xs4all.nl; dx4win@mailman.qth.net
Sent: Tuesday, February 28, 2012 12:40 PM
Subject: Re: [Dx4win] packet questions new user
I changed my user level - and then found the multiple QSO operations,
so I think I am OK..
Sorry for the bandwidth..
73,
Dave, G3UEG
I have done something wrong in trying to upload to Lotw (V7.07)
I tried once and did something wrong, tried again and only got a
fraction of the QSOs
I have done something wrong in trying to upload to Lotw (V7.07)
I tried once and did something wrong, tried again and only got a
fraction of the QSOs exported.
I have now reset the upload flag to Y for the 1275 QSO I
need. However I now am getting Zero QSOs exported.
It looks like the
Just before the CQWW contest I worked F4BKV/BY7PP
When I enter this into DX4Win I get country as France and Zone 14.
A few hours later F4BKV was operating B7P in the contest in Zone 23.
Is the correct action just to change the country to BY for this QSO?
What would the recommended way be to
I have just one zone anomaly left to resolve.
RN8S
I logged him as Z 16
DX4Win advised Z 17
Clublog advises Z 16
I would tend to go with Z16.. unless there is evidence to the contrary..
73,
Dave, G3UEG
__
Dx4win mailing list
Home:
Thanks to all for the advice..
Nice for something to turn out simpler than expected.
73,
Dave, G3UEG
At 09:55 24/10/2010, OZ1AXG Flam wrote:
Hi
I have tried this a number of times ... and it works :)
Also if you want to syncronise the two computers - all you have to copy is
the .DXL and
I am still using V7.7.02.
I want to (temporarily) move the application to a different computer.
I have looked through the Help and AD1C application notes and cannot
find anything.
I have a copy of the dx4w70702.exe file and my key file. Do I need
anything else to load the application?
Do I
This seems like a very basic question to which I should be able to
work out the answer, but having read the help several times and
investigated several callsigns I can't work out the logic.
I understand Priority 1 (New country)
I understand the unconfirmed variations of the other priorities..
I have just upgraded from V6 to V7 with the V7 installed in a new folder.
Question 1)
The HELP menu item does not work. On clicking I get a WARNING msg
Could not get help contents
Error = 0
Msg = The operation completed successfully !!
If I click on Search for Help On...
In case anyone else is interested in the result of my investigations
and help from others here is the learning.
Thanks to all those who offered assistance.
RE Help problem.
My V7 install did not automatically create a desktop
shortcut. Apparently you have to do this manually, having done this
Are there any other Users of DX4Win and Clublog out there?
I have just received my first batch of LoTW confirmations and have
exported my updated log to Clublog, which does not seem to be showing
the LoTW confirmations (only the card confirmations). Is there any
special action I have to take
Thanks to all who showed me how to link DX4Win to the VE7CC application.
I have now upgraded to the latest version and got the cluster working
fine with VE7CC
73,
Dave, G3UEG
__
Dx4win mailing list
Home:
Info must be somewhere, but I can't find it!! I have looked in the
AD1C app notes and the searchable archives, I see lots of people
asking the same question, but I can't find the answer.
Could someone please let me have a link to how to set up DX4Win and
VE7CC cluster so that they can be used
I saw Guy's comment below regarding Vista not supporting serial or
parallel ports.
As I see it there are three ways of providing serial ports
1) On the motherboard
2) From a PCI card
3) From a USB converter
Will Vista prevent the use of **ALL** of these, if not which will
still be available?
I am just about to make my first tentative steps into LOTW. I have
registered and got my certificate. I have to say I am doing this
with a certain amount of trepidation...
I am using V6.04 which I believe makes things a bit more
straightforward than they used to be. I have read the manual
I have used SD and DX4WIN for a long time, and SD can produce ADIF for
import into DX4WIN and also Cabrillo files for contest submission.
SD is brilliant for simple contesting - if you are not networking several
computers and do not need an integrated link to a web-accessed DXcluster.
I have just added my ADIF log from the WPX contest.
I did a DXCC report before and after adding the 150 Qs.
I see from the report I have worked 3 new countries overall and 11 new ones
on 15m.
Is there a simple way to find out what these new ones are?
73,
Dave G3UEG
64 matches
Mail list logo