, both of which
are USB ports in the RigExpert interface. This works perfectly.
Rick
W2GPS
-Original Message-
From: Mel [mailto:ve...@videotron.ca]
Sent: Tuesday, September 22, 2009 7:58 PM
To: Rick Hambly (W2GPS)
Cc: Dx4win@mailman.qth.net
Subject: Re: [Dx4win] CW with PowerSDR
Message-
From: Mel [mailto:ve...@videotron.ca]
Sent: Wednesday, September 23, 2009 6:24 AM
To: Rick Hambly (W2GPS); DX4WIN
Subject: Re: [Dx4win] CW with PowerSDR not working
It sounds like the Virtual Port software is not passing through the
RTS/DTR state. Is there a setting
All,
As a follow-up to the problem below I found a way to temporarily free up some
lower numbered ports
and had some degree of success. First, I switched from VCOM to the more full
featured com0com. This
did not help. Then I changed COM ports around a bit...
DX4WIN = COM24 = com0com = COM25 =
Hello All,
Now that I have DX4WIN V8.02 with its expanded list of COM ports I am trying to
interface it with my
software defined radio. This radio is openHPSDR hardware with PowerSDR
software, the same software
used with the FlexRadio products, like the Flex-5000. I am using Phil
Covington's
Do you really need the PTT line for CW Rick?
Rick Hambly (W2GPS) wrote:
Hello All,
Now that I have DX4WIN V8.02 with its expanded list of COM ports I am trying
to interface it with my
software defined radio. This radio is openHPSDR hardware with PowerSDR
software, the same software
used
]
Sent: Tuesday, September 22, 2009 7:58 PM
To: Rick Hambly (W2GPS)
Cc: Dx4win@mailman.qth.net
Subject: Re: [Dx4win] CW with PowerSDR not working
Do you really need the PTT line for CW Rick?
Rick Hambly (W2GPS) wrote:
Hello All,
Now that I have DX4WIN V8.02 with its expanded list of COM ports I
6 matches
Mail list logo
