Re: [Dx4win] Not saving updates from QRZ
Jim and John, I just replicated the problem here as well. I am a QRZ subscriber, so normally when making a QSO I hit Update QSO in the Callsign/Mgr lookup. But I have found it does not update with new data unless the field in the logging window is blank. For example, if I have already worked the station and from a previous contact have a four digit grid entered, the update will not change that entry -- even though QRZ is showing the entire six digit grid. I have to delete the prior value and then click on Update QSO. The new six digit value is then entered into the empty grid field. Same goes for name, city, county -- any of the other fields. So when it comes to county, I just found a prior QSO that did not have a county filled in. I attempted to Update QSO from the Callsign/Mgr lookup window. The county shows up in the log entry window and then I save. But when I reopen that QSO, the new county info is not there. Like Jim said, I have to do it two or three times. I noticed that the original blank county field had two dashes (--). My theory is that the program sees those two dashes and assumes that the county field has data in it, and then does not update the new data. You have to click in that field to get it to delete the -- and then it appears that the new data will fill and then be saved. Not exactly sure about this behavior, but it appears to be consistent with how the other fields get updated. 73, Dave, N4QS -Original Message- From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Jim Reisert AD1C Sent: Saturday, February 24, 2018 9:49 AM To: j...@w9rpm.com Cc: DX4WIN Subject: Re: [Dx4win] Not saving updates from QRZ The third time (once the state had been saved), I was able to change the county and save the QSO (using ENTER) On Sat, Feb 24, 2018 at 8:48 AM, Jim Reisert AD1C wrote: > I tried again to change the state and county. The state stayed SC, > but the county was blank. > > > On Sat, Feb 24, 2018 at 8:45 AM, Jim Reisert AD1C > wrote: >> I had this happen this morning. It's not necessarily related to QRZ. >> >> I had logged a QSO as K3D/MAR because I did not know the callsign. >> >> I then changed the Call to K3TD/M and the previous QSO information >> came up (NC/Duplin county). I changed this to SC/Marlboro and >> entered >> 49 as the group number, then ENTER to save the QSO changes. >> >> The callsign and group number stayed (values I entered). The >> state/county was left as NC/Duplin. >> >> There is something wrong, I hope Paul can find it! >> >> >> >> On Sun, Feb 11, 2018 at 1:50 PM, W9RPM wrote: >>> Jim, I just noticed that it started on Dec 11th, 2017. Once in a >>> while it was OK. When I would try and update it now, it will >>> sometimes save the Grid, but not the county. I have to manually put >>> that it. Wish I would have noticed it before. A pain to go back. I >>> guess I should have checked my county totals.:-):Sure hope a fix can come. >>> >>> >>> 73 John >>> >>> >>> On 2/11/2018 2:41 PM, Jim Reisert AD1C wrote: >>>> >>>> On Sun, Feb 11, 2018 at 1:11 PM, W9RPM wrote: >>>> >>>>> I just noticed that when I put a callsign in, and update it from >>>>> the Callsign/Mgr lookup window, it is not saving them when after I >>>>> log the contact. Been going back through ones, and its been going on for a while. >>>> >>>> John, I think I have seen this myself, but only in version 9. I >>>> still can't tell what causes it, and it does not happen all the >>>> time, only sometimes. >>>> >>> >>> -- >>> EMAIL: j...@w9rpm.com >>> WEBPAGE: http://www.w9rpm.com/ >>> DX CLUB: http://www.tcdxa.org/ >>> >> >> >> >> -- >> Jim Reisert AD1C, , http://www.ad1c.us > > > > -- > Jim Reisert AD1C, , http://www.ad1c.us -- Jim Reisert AD1C, , http://www.ad1c.us __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net Message delivered to n...@vci.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net Message delivered to arch...@mail-archive.com This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Not saving updates from QRZ
This is very repeatable. I had it happen again. Find a QSO in your log with a state/county. remember the call. Now log a fake QSO with a fake call. Go bak to the QSO you just logged, and change the call to the other call, then TAB. State/county should populate from the previous QSO. Without saving, change the state/county to something else. Now type ENTER to save the changes. You'll get the new call with the old state/county. Change the state/county again, then type ENTER. State will change, county will not. Change the county a third time, then ENTER. County will finally change. On Sat, Feb 24, 2018 at 8:49 AM, Jim Reisert AD1C wrote: > The third time (once the state had been saved), I was able to change > the county and save the QSO (using ENTER) > > > On Sat, Feb 24, 2018 at 8:48 AM, Jim Reisert AD1C > wrote: >> I tried again to change the state and county. The state stayed SC, >> but the county was blank. >> >> >> On Sat, Feb 24, 2018 at 8:45 AM, Jim Reisert AD1C >> wrote: >>> I had this happen this morning. It's not necessarily related to QRZ. >>> >>> I had logged a QSO as K3D/MAR because I did not know the callsign. >>> >>> I then changed the Call to K3TD/M and the previous QSO information >>> came up (NC/Duplin county). I changed this to SC/Marlboro and entered >>> 49 as the group number, then ENTER to save the QSO changes. >>> >>> The callsign and group number stayed (values I entered). The >>> state/county was left as NC/Duplin. >>> >>> There is something wrong, I hope Paul can find it! >>> >>> >>> >>> On Sun, Feb 11, 2018 at 1:50 PM, W9RPM wrote: Jim, I just noticed that it started on Dec 11th, 2017. Once in a while it was OK. When I would try and update it now, it will sometimes save the Grid, but not the county. I have to manually put that it. Wish I would have noticed it before. A pain to go back. I guess I should have checked my county totals.:-):Sure hope a fix can come. 73 John On 2/11/2018 2:41 PM, Jim Reisert AD1C wrote: > > On Sun, Feb 11, 2018 at 1:11 PM, W9RPM wrote: > >> I just noticed that when I put a callsign in, and update it from the >> Callsign/Mgr lookup window, it is not saving them when after I log the >> contact. Been going back through ones, and its been going on for a while. > > John, I think I have seen this myself, but only in version 9. I still > can't tell what causes it, and it does not happen all the time, only > sometimes. > -- EMAIL: j...@w9rpm.com WEBPAGE: http://www.w9rpm.com/ DX CLUB: http://www.tcdxa.org/ >>> >>> >>> >>> -- >>> Jim Reisert AD1C, , http://www.ad1c.us >> >> >> >> -- >> Jim Reisert AD1C, , http://www.ad1c.us > > > > -- > Jim Reisert AD1C, , http://www.ad1c.us -- Jim Reisert AD1C, , http://www.ad1c.us __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net Message delivered to arch...@mail-archive.com This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Not saving updates from QRZ
I tried again to change the state and county. The state stayed SC, but the county was blank. On Sat, Feb 24, 2018 at 8:45 AM, Jim Reisert AD1C wrote: > I had this happen this morning. It's not necessarily related to QRZ. > > I had logged a QSO as K3D/MAR because I did not know the callsign. > > I then changed the Call to K3TD/M and the previous QSO information > came up (NC/Duplin county). I changed this to SC/Marlboro and entered > 49 as the group number, then ENTER to save the QSO changes. > > The callsign and group number stayed (values I entered). The > state/county was left as NC/Duplin. > > There is something wrong, I hope Paul can find it! > > > > On Sun, Feb 11, 2018 at 1:50 PM, W9RPM wrote: >> Jim, I just noticed that it started on Dec 11th, 2017. Once in a while it >> was OK. When I would try and update it now, it will sometimes save the Grid, >> but not the county. I have to manually put that it. Wish I would have >> noticed it before. A pain to go back. I guess I should have checked my >> county totals.:-):Sure hope a fix can come. >> >> >> 73 John >> >> >> On 2/11/2018 2:41 PM, Jim Reisert AD1C wrote: >>> >>> On Sun, Feb 11, 2018 at 1:11 PM, W9RPM wrote: >>> I just noticed that when I put a callsign in, and update it from the Callsign/Mgr lookup window, it is not saving them when after I log the contact. Been going back through ones, and its been going on for a while. >>> >>> John, I think I have seen this myself, but only in version 9. I still >>> can't tell what causes it, and it does not happen all the time, only >>> sometimes. >>> >> >> -- >> EMAIL: j...@w9rpm.com >> WEBPAGE: http://www.w9rpm.com/ >> DX CLUB: http://www.tcdxa.org/ >> > > > > -- > Jim Reisert AD1C, , http://www.ad1c.us -- Jim Reisert AD1C, , http://www.ad1c.us __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net Message delivered to arch...@mail-archive.com This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Not saving updates from QRZ
The third time (once the state had been saved), I was able to change the county and save the QSO (using ENTER) On Sat, Feb 24, 2018 at 8:48 AM, Jim Reisert AD1C wrote: > I tried again to change the state and county. The state stayed SC, > but the county was blank. > > > On Sat, Feb 24, 2018 at 8:45 AM, Jim Reisert AD1C > wrote: >> I had this happen this morning. It's not necessarily related to QRZ. >> >> I had logged a QSO as K3D/MAR because I did not know the callsign. >> >> I then changed the Call to K3TD/M and the previous QSO information >> came up (NC/Duplin county). I changed this to SC/Marlboro and entered >> 49 as the group number, then ENTER to save the QSO changes. >> >> The callsign and group number stayed (values I entered). The >> state/county was left as NC/Duplin. >> >> There is something wrong, I hope Paul can find it! >> >> >> >> On Sun, Feb 11, 2018 at 1:50 PM, W9RPM wrote: >>> Jim, I just noticed that it started on Dec 11th, 2017. Once in a while it >>> was OK. When I would try and update it now, it will sometimes save the Grid, >>> but not the county. I have to manually put that it. Wish I would have >>> noticed it before. A pain to go back. I guess I should have checked my >>> county totals.:-):Sure hope a fix can come. >>> >>> >>> 73 John >>> >>> >>> On 2/11/2018 2:41 PM, Jim Reisert AD1C wrote: On Sun, Feb 11, 2018 at 1:11 PM, W9RPM wrote: > I just noticed that when I put a callsign in, and update it from the > Callsign/Mgr lookup window, it is not saving them when after I log the > contact. Been going back through ones, and its been going on for a while. John, I think I have seen this myself, but only in version 9. I still can't tell what causes it, and it does not happen all the time, only sometimes. >>> >>> -- >>> EMAIL: j...@w9rpm.com >>> WEBPAGE: http://www.w9rpm.com/ >>> DX CLUB: http://www.tcdxa.org/ >>> >> >> >> >> -- >> Jim Reisert AD1C, , http://www.ad1c.us > > > > -- > Jim Reisert AD1C, , http://www.ad1c.us -- Jim Reisert AD1C, , http://www.ad1c.us __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net Message delivered to arch...@mail-archive.com This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Not saving updates from QRZ
I had this happen this morning. It's not necessarily related to QRZ. I had logged a QSO as K3D/MAR because I did not know the callsign. I then changed the Call to K3TD/M and the previous QSO information came up (NC/Duplin county). I changed this to SC/Marlboro and entered 49 as the group number, then ENTER to save the QSO changes. The callsign and group number stayed (values I entered). The state/county was left as NC/Duplin. There is something wrong, I hope Paul can find it! On Sun, Feb 11, 2018 at 1:50 PM, W9RPM wrote: > Jim, I just noticed that it started on Dec 11th, 2017. Once in a while it > was OK. When I would try and update it now, it will sometimes save the Grid, > but not the county. I have to manually put that it. Wish I would have > noticed it before. A pain to go back. I guess I should have checked my > county totals.:-):Sure hope a fix can come. > > > 73 John > > > On 2/11/2018 2:41 PM, Jim Reisert AD1C wrote: >> >> On Sun, Feb 11, 2018 at 1:11 PM, W9RPM wrote: >> >>> I just noticed that when I put a callsign in, and update it from the >>> Callsign/Mgr lookup window, it is not saving them when after I log the >>> contact. Been going back through ones, and its been going on for a while. >> >> John, I think I have seen this myself, but only in version 9. I still >> can't tell what causes it, and it does not happen all the time, only >> sometimes. >> > > -- > EMAIL: j...@w9rpm.com > WEBPAGE: http://www.w9rpm.com/ > DX CLUB: http://www.tcdxa.org/ > -- Jim Reisert AD1C, , http://www.ad1c.us __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net Message delivered to arch...@mail-archive.com This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Not saving updates from QRZ
Jim, I just noticed that it started on Dec 11th, 2017. Once in a while it was OK. When I would try and update it now, it will sometimes save the Grid, but not the county. I have to manually put that it. Wish I would have noticed it before. A pain to go back. I guess I should have checked my county totals.:-):Sure hope a fix can come. 73 John On 2/11/2018 2:41 PM, Jim Reisert AD1C wrote: On Sun, Feb 11, 2018 at 1:11 PM, W9RPM wrote: I just noticed that when I put a callsign in, and update it from the Callsign/Mgr lookup window, it is not saving them when after I log the contact. Been going back through ones, and its been going on for a while. John, I think I have seen this myself, but only in version 9. I still can't tell what causes it, and it does not happen all the time, only sometimes. -- EMAIL: j...@w9rpm.com WEBPAGE: http://www.w9rpm.com/ DX CLUB: http://www.tcdxa.org/ __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net Message delivered to arch...@mail-archive.com This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Not saving updates from QRZ
On Sun, Feb 11, 2018 at 1:11 PM, W9RPM wrote: > I just noticed that when I put a callsign in, and update it from the > Callsign/Mgr lookup window, it is not saving them when after I log the > contact. Been going back through ones, and its been going on for a while. John, I think I have seen this myself, but only in version 9. I still can't tell what causes it, and it does not happen all the time, only sometimes. -- Jim Reisert AD1C, , http://www.ad1c.us __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net Message delivered to arch...@mail-archive.com This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] Not saving updates from QRZ
I just noticed that when I put a callsign in, and update it from the Callsign/Mgr lookup window, it is not saving them when after I log the contact. Been going back through ones, and its been going on for a while. Any ideas? 73 John W9RPM -- EMAIL: j...@w9rpm.com WEBPAGE: http://www.w9rpm.com/ DX CLUB: http://www.tcdxa.org/ __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net Message delivered to arch...@mail-archive.com This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html