[Dx4win] Sending DX4WIN frequency information to Green Heron Everyware

I'm beginning to set up some Green Heron wireless control switching, and now I need to convey frequency information between DX4WIN and the Green Heron environment using the GHE Everyware UDP communication. It appears that PstRotatorAz will do the job, but I'm unsure of the exact setup

[Dx4win] Frequency main window (By default)

I'm using one Yaesu FT1000 MP Mark V connected to DX4WIn V 8.05. When I select one spot/station/frequency from cluster , radio goes to frequency but ALWAYS on 17 m SSB showing exact frequency in Freq (MHz), no matter what band the spot is. What's happening? In Set-up parameters I have as Default

Re: [Dx4win] Frequency main window (By default)

Hi Luis, You did not say which version of DX4WIN you are using. If you are in real-time add mode (F9) and using DX4WIN 8.0x, does the Frequency field in the QSO window change when you spin the dial on the radio? On Fri, Jun 16, 2017 at 5:17 AM, Luis Teixeira wrote: > I'm

Re: [Dx4win] Frequency main window (By default)

Hi Jim, Thanks for the answer! DX4Win version, as indicated in my previous e-mail, is 8.05. When I spin the dial on the radio the frequency in the QSO window do NOT change , it maintains 18.165,93 MHz. When I click in one spot radio goes to that frequency, in QSO window momentarily freq is the

Re: [Dx4win] Frequency main window (By default)

What happens when you go to Radio on the main menu page? Does it say 'Start Radio' or 'Stop Radio'? Click Start, if you can. The issue sounds as though DX4WIN is not seeing the rig. It's nothing to do with the Spots. As Jim says, if you and in live QSO logging mode (F9), the DX4WIN should