[DXBase] ADIF Import problem DXbase 2003

getting the BIG RED X window: C:\Program Files\Scientific Solutions\DXbase2003\N5ZM.mdb\refdata.mdb Isn't a valid path. Where does the refdata.mdb extension come from?? Egg on my face, Earl N5ZM..

[DXBase] ADIF Import problem DXbase 2003

Bill, W9OL, found an error I made. But it was I just typed the wrong info. Instead of where I typed 'Source Path' I should have typed DXbase 2003 Full Path. I have corrected it below. Earl wrote: Hi all, Just finished NAQP RTTY Test with Writelog. I have used the ADIF Import utility

[DXBase] Chile ?

That's it, hope I got all the steps right. Earl N5ZM.. === Al Bailey wrote: When I go into Summary and enter CE to see what I need in Chile it blanks out the entries and leaves the previous country Prefix. For example if I look up 3X it gives me the proper

[Dxbase] DXCC Worksheet

(QSL#,CFM Type and Credited). Is there a way to remove them from the report? Earl N5ZM.. -- Earl F. Smith - N5ZM PO Box 20065 White Hall, AR 71612-0065

[Dxbase] WAZ tracking

Absolutely, same from here. Thanks Joe!! Earl N5ZM.. Jack wrote: Joe, Thank you for all the things you do to help DXbase users. Regards, Jack -- Earl F. Smith - N5ZM PO Box 20065 White Hall, AR 71612-0065

[Dxbase] 5BWAZ report(s) posted (DXbase2006)

Thanks for another great report Joe... Earl N5ZM.. -- Joseph Glockner wrote: If any DXbase2006 user wants to download the 5BWAZ zip file from my website, I just finished posting the zip file. You can access the ZIP file (download) from: http://www.navycthistory.com/wa6axe

[Dxbase] Pathfinder Web Client address changed

Anyone know how to change the path to the 'Pathfinder Web Client' within DXBase??? Earl N5ZM.. -- Earl F. Smith - N5ZM PO Box 20065 White Hall, AR 71612-0065

[Dxbase] New Installation DXB 2006

Found the error of my ways. I was using a previous registration. All is well now. Just another Senior moment. I didn't check the dates. Lesson learned: Remove old registrations. Hi Hi... Earl N5ZM.. --- Earl wrote: Bought a new computer. I have BXB2006 installed and have run

[Dxbase] K1EL Winkey question

is AE5AA and I get way to many ..--..'s my guess is that the 'E' is getting swallowed up by the '5'. TIA, 73, Earl N5ZM

[Dxbase] K1EL Winkey question

Found it, finally, in the Winkey Manual pg 14. It is the | key the one above the \. It introduces a one bit space. I ended up using two (ae||5aa) and the call sounds much better now. 73, Earl N5ZM.. - Earl wrote: In setting up the macros for the K1EL Keyer in DXbase

Re: [Dxbase] suggestion

Jim, Neal and all, I started to post my comments and suggestions but Jim could not have expressed it better. For me I echo every thing Jim has said. Thanks Jim for posting your thoughts. Thanks also the Joe WA6AXE for all the help he has given all of us.. Earl N5ZM

Re: [Dxbase] VHF Packet Users?

Hello Neal, I have not used a VHF connection in 10 years. Two internet connections would be great.. Earl N5ZM..(DXBase user 13+ Years) Neal Campbell wrote: I just wanted to get an indication from you about your usage of VHF for packet clusters. I know that almost every sysop I know (myself

Re: [Dxbase] 4U1N

1810.4 4U1UNEU ONLY 0355 24 Jan Earl N5ZM.. K3SEW wrote: I worked 4U1N on 160 M on 2009-01-24 at 0431 utc . . . . who said he was in Syria. But I can't find any confirmation on his QTH. DXbase will not log it correctly either. Does anyone have info on this station

Re: [Dxbase] Status Update (feedback)

this will work. If you happen to hit one of the up/down buttons you will have to reset the speed to '0' in your WPM Settings. My 'WPM Settings' are: 10 Min 40 Max 0 Speed 255 Pot range 73, Earl N5ZM.. -- Neal Campbell wrote: Thanks Rod, I didn't realize the speed pot limitation

[Dxbase] DXB2007 QRZ.com lookup

get the notice 'application has failed to start because cmll10.dll was not found'. This file is in the Dxbase 2007 folder. This fix worked last year when first released. TIA for your help with my little problem. Earl, N5ZM

Re: [Dxbase] DXB2007 QRZ.com lookup

No problem after all. When in doubt read the instructions!! Sorry for the bandwidth... Earl N5ZM.. Earl wrote: I recently had a hard drive problem and had to reinstall DXbase. I have it up and running now but just found the old problem with QRZ.com lookups. Going through my email

Re: [Dxbase] PJ Update Yourself..

checked through 31 December 2010. but after 1 January 2011 they are Officially deleted and can no longer be field checked. So now is the time to have them checked if you have the need. 73 Earl N5ZM (DXCC Field Checker Delta Division) - On 10/30/2010 2:40 PM, Crownhaven

Re: [Dxbase] HF Numeric Statistics/Deleted Entities

Tools/options/user options/General Tab-- Right side of tab click on Prompt under Include Deleted in Statistics then OK out. I think this is what you are looking for. Earl N5ZM.. - On 1/1/2011 7:47 AM, Crownhaven wrote: I don't remember seeing that either. Someone will come up

Re: [Dxbase] [dxbase] CDROM lookups - final findings - Joe wa6axe

Gary, everything is down hill from up there isn't it?? Hi Hi... Earl N5ZM.. On 4/22/2012 3:06 PM, Gary AL9A wrote: I am seeing with DXB2006 as I have a RAC CDROM connected. Until Joe brought this up though I had not noticed the bug. Apparently I just crank my antenna in the general

Re: [Dxbase] Joe is now QRT - GONE - I truely have had enough ...

at Hamcom if you are planning to be there. 73 and Best Wishes. Earl N5ZM.. On 5/10/2012 2:54 AM, tneill1...@aol.com wrote: Joe I sincerely regret that you are leaving the DXBase Family after all these many years. It is because of your intense desire to provide technical support to us

[Dxbase] Problem with Previous QSO Toolbar

QSO height. DXBase 2007 ver 1.06 OS-XP sp3 Just need the border to go away like it was before I hosed things up. Hi Hi Earl N5ZM.. __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http

Re: [Dxbase] Thoughts from Joe WA6AXE - abt DXbase's future

Joe, I will be staying with DXBase also, been with DXB since the dos days. So add me to your DXBase group. I can't say enough thanks for all you have done to help myself and all the group. With out you this program would have died a long time ago. Thanks again.. 73, de Earl N5ZM.. On 5

Re: [Dxbase] Entity Name CHANGE for Prefix 3DA --

Thanks Joe.  Got it. Earl N5ZM.. On 12/9/2019 1:55 PM, Joseph Glockner via Dxbase wrote: The Entity NAME for  Prefix  3DA has been changedfrom Swaziland to Kingdom of Eswatini You can make the entity name change from within DXbase2007.. 73 Joe wa6axe

Re: [Dxbase] Serious!! ?? Serious would be a new version of DXbase

until I make the next move to a new QTH and revamp the whole thing from scratch. Earl N8SS -- Message: 1 Date: Tue, 18 Nov 2014 12:06:42 -0600 From: Crownhaven crownha...@bellsouth.net To: dxbase@mailman.qth.net Subject: Re