Thanks for response.
> Why? You're setting a VLAN filter with the tag value of 25. Why do
> promiscuous mode in addition?
--> I was confirming that I am _not_ setting p.VPE (essentially disabling VLAN
promiscuous ). We are in same page.
Still the packets are not going through.
'set' is just t
I want to give a small addition: even the chip is EOL, but we have a big number
of embedded devices with the chip on board. All devices installed in the field
and, unfortunately, we do must support the devices!
-Original Message-
From: Желобанов Дмитрий Владимирович
Sent: Wednesday, Se
Hello,
Of course I wouldn't copy-paste Linux driver into QNX. As a matter of fact, we
have the source code for QNX, it names devnp-speedo.
I just want to fix the QNX driver by inspiration of the Linux driver. By the
way, the QNX network kernel is a port of the FreeBSD kernel.
The device is visi
> -Original Message-
> From: Shankar Krishnamurthy [mailto:shankar.krishnamur...@citrix.com]
> Sent: Tuesday, September 15, 2015 2:57 PM
> To: e1000-devel@lists.sourceforge.net
> Subject: [E1000-devel] Vlan Table in I40e XL710
>
> Hi fortville Experts,
>
> Was trying to use VLAN Table (fo
Hi fortville Experts,
Was trying to use VLAN Table (for filtering) in conjunction with MACVLAN table
mentioned in "7.4.8.3 L2 Filtering Algorithm" (also cut n' pasted below)
My test scenario:
1. In SRIOV mode, gave one VF to VM. For that, I added the corresponding MAC
into MACVLAN table with vl
As long as there is no copy and pasting from the Linux driver to the QNX driver
it should not be a problem. I'm not a lawyer but that's generally the case.
That said, since the driver works after another a second reboot it's probably
not related to the driver. This is probably something that
The 82551L has been EOLed for about nine years by my estimation. We don't have
any further support for it.
Also, it is probably a violation of the GPL to start with the Linux driver to
work on the QNX driver. I would suggest trying the FreeBSD driver.
Todd Fujinaka
Software Application Engineer
Hello,
We use chips 82551IL (did 0x1209 rev 0x10) in our embedded platforms. Our
devices run QNX operation system. We faced with an issue: sometimes our devices
don't receive Ethernet packets right after boot at all, only reboot helps to
revive the devices. We think the root problem is in hardw
