Re: [edk2] EmulatorPkg Unix Host Segmentation fault.

[Jordan Justen]

On 2019-02-17 18:25:01, Ni, Ray wrote:
> Jordan,
>  > Study the PeiCore migration logic a bit more, I found since PeiCore
>  > knows the exact size of new stack in permanent memory, it migrates
>  > old stack to the top of new stack.
>  > But the migration logic in above C code (since it doesn't know the
>  > size of new stack, CopySize is the size of temporary memory) may copy 
>  > the old stack to the middle in new stack.
> 
> Maybe your new RamMigration2 PPI needs to carry both the old and new 
> stack/heap location and size.
> It helps:
> 1. migrate the old stack to top of new stack (instead of middle of new 
> stack).
> 2. potentially reduce the size of memory that needs to be copied.
> 
> TemporaryRamMigration (
>IN CONST EFI_PEI_SERVICES **PeiServices,
>IN EFI_PHYSICAL_ADDRESS   TemporaryStackBase,
>IN EFI_PHYSICAL_ADDRESS   PermanentStackSize,
>IN EFI_PHYSICAL_ADDRESS   TemporaryHeapBase,
>IN EFI_PHYSICAL_ADDRESS   PermanentHeapSize,
>IN TEMPORARY_RAM_MIGRATION_CALLBACK   Callback,
>IN VOID   *Context
>)

Hmm. I'll think about that for the new PPI.

> Before the finalize of PI spec change regarding the RamMigration2 
> change, I prefer to fix the EmulatorPkg boot crash ASAP using the
> OVMF-like solution.
> If you agree, I will send out the patch to let you review.

You are right that it will take more time for a new PPI. But, I have
almost finished my patches to fix the PEI Core with the old PPI. I'll
try to send them out tonight.

-Jordan
___
edk2-devel mailing list
edk2-devel@lists.01.org
https://lists.01.org/mailman/listinfo/edk2-devel

Re: [edk2] EmulatorPkg Unix Host Segmentation fault.

[Ni, Ray]

Jordan,
> Study the PeiCore migration logic a bit more, I found since PeiCore
> knows the exact size of new stack in permanent memory, it migrates
> old stack to the top of new stack.
> But the migration logic in above C code (since it doesn't know the
> size of new stack, CopySize is the size of temporary memory) may copy 
> the old stack to the middle in new stack.


Maybe your new RamMigration2 PPI needs to carry both the old and new 
stack/heap location and size.

It helps:
1. migrate the old stack to top of new stack (instead of middle of new 
stack).

2. potentially reduce the size of memory that needs to be copied.

TemporaryRamMigration (
  IN CONST EFI_PEI_SERVICES **PeiServices,
  IN EFI_PHYSICAL_ADDRESS   TemporaryStackBase,
  IN EFI_PHYSICAL_ADDRESS   PermanentStackSize,
  IN EFI_PHYSICAL_ADDRESS   TemporaryHeapBase,
  IN EFI_PHYSICAL_ADDRESS   PermanentHeapSize,
  IN TEMPORARY_RAM_MIGRATION_CALLBACK   Callback,
  IN VOID   *Context
  )


Before the finalize of PI spec change regarding the RamMigration2 
change, I prefer to fix the EmulatorPkg boot crash ASAP using the

OVMF-like solution.
If you agree, I will send out the patch to let you review.

--
Thanks,
Ray
___
edk2-devel mailing list
edk2-devel@lists.01.org
https://lists.01.org/mailman/listinfo/edk2-devel

Re: [edk2] EmulatorPkg Unix Host Segmentation fault.

[Andrew Fish via edk2-devel]

> On Feb 15, 2019, at 11:40 PM, Ni, Ray  > wrote:
> 
> I also met this issue.
> I found three solutions:
> 1. Forcing PeiMain CC flag to "-O0" works.
> 2. Changing EmulatorPkg/Sec to not produce TemporaryRamSupportPpi also works.
> 3. Implement the temporary migration routine as below in EmulatorPkg/Sec 
> module.
> 
> EFI_STATUS
> EFIAPI
> SecTemporaryRamSupport (
>  IN CONST EFI_PEI_SERVICES   **PeiServices,
>  IN EFI_PHYSICAL_ADDRESS TemporaryMemoryBase,
>  IN EFI_PHYSICAL_ADDRESS PermanentMemoryBase,
>  IN UINTNCopySize
>  )
> {
>  VOID *OldHeap;
>  VOID *NewHeap;
>  VOID *OldStack;
>  VOID *NewStack;
>  UINTNStackMigrateOffset;
>  BASE_LIBRARY_JUMP_BUFFER JumpBuffer;
> 
>  DEBUG ((EFI_D_INFO,
>"TemporaryRamMigration(0x%Lx, 0x%Lx, 0x%Lx)\n",
>TemporaryMemoryBase,
>PermanentMemoryBase,
>(UINT64)CopySize
>));
> 
>  //
>  // Assume Host prepare the stack and heap in the temprary ram that stack
>  // is below heap (stack is in smaller address).
>  // Stack/heap migration depends on the stack/heap location information
>  // in the temporary ram.
>  //
>  OldStack = (VOID*)(UINTN)TemporaryMemoryBase;
>  NewStack = (VOID*)((UINTN)PermanentMemoryBase);
> 
>  OldHeap = (VOID*)((UINTN)TemporaryMemoryBase + (CopySize >> 1));
>  NewHeap = (VOID*)((UINTN)PermanentMemoryBase + (CopySize >> 1));
> 
>  StackMigrateOffset = (UINTN)NewStack - (UINTN)OldStack;
> 
>  //
>  // Migrate Heap and Stack
>  //
>  CopyMem (NewHeap, OldHeap, CopySize >> 1);
>  CopyMem (NewStack, OldStack, CopySize >> 1);
> 
>  //
>  // Use SetJump()/LongJump() to switch to a new stack.
>  //
>  if (SetJump () == 0) {
> #if defined (MDE_CPU_IA32)
>JumpBuffer.Esp = JumpBuffer.Esp + StackMigrateOffset;
>JumpBuffer.Ebp = JumpBuffer.Ebp + StackMigrateOffset;
> #endif
> #if defined (MDE_CPU_X64)
>JumpBuffer.Rsp = JumpBuffer.Rsp + StackMigrateOffset;
>JumpBuffer.Rbp = JumpBuffer.Rbp + StackMigrateOffset;
> #endif
>LongJump (, (UINTN)-1);
>  }
> 
>  ZeroMem ((VOID *)(UINTN) TemporaryMemoryBase, CopySize);
> 
>  return EFI_SUCCESS;
> }
> 
> 
> Andrew,
> I'd like to know why you chose to produce the migration PPI from
> EmulatorPkg/Sec module.
> Based on PI spec and current PeiCore implementation, PeiCore can do the 
> migration when PPI is absent.
> 

Ray,

Sorry I don't remember if it was due to the code being so old, or if I was 
trying to better emulate a real platform.

Thanks,

Andrew Fish

> 
> 
> -- 
> Thanks,
> Ray
> ___
> edk2-devel mailing list
> edk2-devel@lists.01.org 
> https://lists.01.org/mailman/listinfo/edk2-devel 
> 
___
edk2-devel mailing list
edk2-devel@lists.01.org
https://lists.01.org/mailman/listinfo/edk2-devel

Re: [edk2] EmulatorPkg Unix Host Segmentation fault.

[Jordan Justen]

On 2019-02-16 00:05:27, Ni, Ray wrote:
> On 2/16/2019 3:43 PM, Ni, Ray wrote:
> > (Sent third times to make sure Andrew and Laszlo are in the TO list.)
> > 
> > I also met this issue.
> > I found three solutions:
> > 1. Forcing PeiMain CC flag to "-O0" works.
> > 2. Changing EmulatorPkg/Sec to not produce TemporaryRamSupportPpi also 
> > works.
> > 3. Implement the temporary migration routine as below in EmulatorPkg/Sec 
> > module.
> > 
> > EFI_STATUS
> > EFIAPI
> > SecTemporaryRamSupport (
> >    IN CONST EFI_PEI_SERVICES   **PeiServices,
> >    IN EFI_PHYSICAL_ADDRESS TemporaryMemoryBase,
> >    IN EFI_PHYSICAL_ADDRESS PermanentMemoryBase,
> >    IN UINTN    CopySize
> >    )
> > {
> >    VOID *OldHeap;
> >    VOID *NewHeap;
> >    VOID *OldStack;
> >    VOID *NewStack;
> >    UINTN    StackMigrateOffset;
> >    BASE_LIBRARY_JUMP_BUFFER JumpBuffer;
> > 
> >    DEBUG ((EFI_D_INFO,
> >      "TemporaryRamMigration(0x%Lx, 0x%Lx, 0x%Lx)\n",
> >      TemporaryMemoryBase,
> >      PermanentMemoryBase,
> >      (UINT64)CopySize
> >      ));
> > 
> >    //
> >    // Assume Host prepare the stack and heap in the temprary ram that stack
> >    // is below heap (stack is in smaller address).
> >    // Stack/heap migration depends on the stack/heap location information
> >    // in the temporary ram.
> >    //
> >    OldStack = (VOID*)(UINTN)TemporaryMemoryBase;
> >    NewStack = (VOID*)((UINTN)PermanentMemoryBase);
> > 
> >    OldHeap = (VOID*)((UINTN)TemporaryMemoryBase + (CopySize >> 1));
> >    NewHeap = (VOID*)((UINTN)PermanentMemoryBase + (CopySize >> 1));
> > 
> >    StackMigrateOffset = (UINTN)NewStack - (UINTN)OldStack;
> > 
> >    //
> >    // Migrate Heap and Stack
> >    //
> >    CopyMem (NewHeap, OldHeap, CopySize >> 1);
> >    CopyMem (NewStack, OldStack, CopySize >> 1);
> > 
> >    //
> >    // Use SetJump()/LongJump() to switch to a new stack.
> >    //
> >    if (SetJump () == 0) {
> > #if defined (MDE_CPU_IA32)
> >      JumpBuffer.Esp = JumpBuffer.Esp + StackMigrateOffset;
> >      JumpBuffer.Ebp = JumpBuffer.Ebp + StackMigrateOffset;
> > #endif
> > #if defined (MDE_CPU_X64)
> >      JumpBuffer.Rsp = JumpBuffer.Rsp + StackMigrateOffset;
> >      JumpBuffer.Rbp = JumpBuffer.Rbp + StackMigrateOffset;
> > #endif
> >      LongJump (, (UINTN)-1);
> >    }
> > 
> >    ZeroMem ((VOID *)(UINTN) TemporaryMemoryBase, CopySize);
> > 
> >    return EFI_SUCCESS;
> > }
> > 
> > Andrew,
> > I'd like to know why you chose to produce the migration PPI from
> > EmulatorPkg/Sec module.
> > Based on PI spec and current PeiCore implementation, PeiCore can do the 
> > migration when PPI is absent.
> > 
> Study the PeiCore migration logic a bit more, I found since PeiCore 
> knows the exact size of new stack in permanent memory, it migrates the 
> old stack to the top of new stack.
> But the migration logic in above C code (since it doesn't know the size 
> of new stack, CopySize is the size of temporary memory) may copy the old 
> stack to the middle in new stack.

We had a fair amount of discussion about this in November.

Search for "EmulatorPkg Unix" on
https://lists.01.org/pipermail/edk2-devel/2018-November/thread.html.

I have a branch related to that discussion:

https://github.com/jljusten/edk2/tree/temp-ram-support2

There are essentially 2 parts to the branch. First is a fix for the
PEI Core TemporaryRamMigration implementation.

After the "MdeModulePkg/Core/Pei: Use assembly for X64
TemporaryRamMigration" patch on that branch, I was working on a new
TemporaryRamMigration2 PPI that should fix the issues with
TemporaryRamMigration. Of course, that would have to become part of
the standard before EDK-II could add it.

-Jordan
___
edk2-devel mailing list
edk2-devel@lists.01.org
https://lists.01.org/mailman/listinfo/edk2-devel

Re: [edk2] EmulatorPkg Unix Host Segmentation fault.

[Ni, Ray]

On 2/16/2019 3:43 PM, Ni, Ray wrote:

(Sent third times to make sure Andrew and Laszlo are in the TO list.)

I also met this issue.
I found three solutions:
1. Forcing PeiMain CC flag to "-O0" works.
2. Changing EmulatorPkg/Sec to not produce TemporaryRamSupportPpi also 
works.
3. Implement the temporary migration routine as below in EmulatorPkg/Sec 
module.


EFI_STATUS
EFIAPI
SecTemporaryRamSupport (
   IN CONST EFI_PEI_SERVICES   **PeiServices,
   IN EFI_PHYSICAL_ADDRESS TemporaryMemoryBase,
   IN EFI_PHYSICAL_ADDRESS PermanentMemoryBase,
   IN UINTN    CopySize
   )
{
   VOID *OldHeap;
   VOID *NewHeap;
   VOID *OldStack;
   VOID *NewStack;
   UINTN    StackMigrateOffset;
   BASE_LIBRARY_JUMP_BUFFER JumpBuffer;

   DEBUG ((EFI_D_INFO,
     "TemporaryRamMigration(0x%Lx, 0x%Lx, 0x%Lx)\n",
     TemporaryMemoryBase,
     PermanentMemoryBase,
     (UINT64)CopySize
     ));

   //
   // Assume Host prepare the stack and heap in the temprary ram that stack
   // is below heap (stack is in smaller address).
   // Stack/heap migration depends on the stack/heap location information
   // in the temporary ram.
   //
   OldStack = (VOID*)(UINTN)TemporaryMemoryBase;
   NewStack = (VOID*)((UINTN)PermanentMemoryBase);

   OldHeap = (VOID*)((UINTN)TemporaryMemoryBase + (CopySize >> 1));
   NewHeap = (VOID*)((UINTN)PermanentMemoryBase + (CopySize >> 1));

   StackMigrateOffset = (UINTN)NewStack - (UINTN)OldStack;

   //
   // Migrate Heap and Stack
   //
   CopyMem (NewHeap, OldHeap, CopySize >> 1);
   CopyMem (NewStack, OldStack, CopySize >> 1);

   //
   // Use SetJump()/LongJump() to switch to a new stack.
   //
   if (SetJump () == 0) {
#if defined (MDE_CPU_IA32)
     JumpBuffer.Esp = JumpBuffer.Esp + StackMigrateOffset;
     JumpBuffer.Ebp = JumpBuffer.Ebp + StackMigrateOffset;
#endif
#if defined (MDE_CPU_X64)
     JumpBuffer.Rsp = JumpBuffer.Rsp + StackMigrateOffset;
     JumpBuffer.Rbp = JumpBuffer.Rbp + StackMigrateOffset;
#endif
     LongJump (, (UINTN)-1);
   }

   ZeroMem ((VOID *)(UINTN) TemporaryMemoryBase, CopySize);

   return EFI_SUCCESS;
}


Andrew,
I'd like to know why you chose to produce the migration PPI from
EmulatorPkg/Sec module.
Based on PI spec and current PeiCore implementation, PeiCore can do the 
migration when PPI is absent.




Study the PeiCore migration logic a bit more, I found since PeiCore 
knows the exact size of new stack in permanent memory, it migrates the 
old stack to the top of new stack.
But the migration logic in above C code (since it doesn't know the size 
of new stack, CopySize is the size of temporary memory) may copy the old 
stack to the middle in new stack.


--
Thanks,
Ray
___
edk2-devel mailing list
edk2-devel@lists.01.org
https://lists.01.org/mailman/listinfo/edk2-devel

Re: [edk2] EmulatorPkg Unix Host Segmentation fault.

[Ni, Ray]

(Sent third times to make sure Andrew and Laszlo are in the TO list.)

I also met this issue.
I found three solutions:
1. Forcing PeiMain CC flag to "-O0" works.
2. Changing EmulatorPkg/Sec to not produce TemporaryRamSupportPpi also 
works.
3. Implement the temporary migration routine as below in EmulatorPkg/Sec 
module.


EFI_STATUS
EFIAPI
SecTemporaryRamSupport (
  IN CONST EFI_PEI_SERVICES   **PeiServices,
  IN EFI_PHYSICAL_ADDRESS TemporaryMemoryBase,
  IN EFI_PHYSICAL_ADDRESS PermanentMemoryBase,
  IN UINTNCopySize
  )
{
  VOID *OldHeap;
  VOID *NewHeap;
  VOID *OldStack;
  VOID *NewStack;
  UINTNStackMigrateOffset;
  BASE_LIBRARY_JUMP_BUFFER JumpBuffer;

  DEBUG ((EFI_D_INFO,
"TemporaryRamMigration(0x%Lx, 0x%Lx, 0x%Lx)\n",
TemporaryMemoryBase,
PermanentMemoryBase,
(UINT64)CopySize
));

  //
  // Assume Host prepare the stack and heap in the temprary ram that stack
  // is below heap (stack is in smaller address).
  // Stack/heap migration depends on the stack/heap location information
  // in the temporary ram.
  //
  OldStack = (VOID*)(UINTN)TemporaryMemoryBase;
  NewStack = (VOID*)((UINTN)PermanentMemoryBase);

  OldHeap = (VOID*)((UINTN)TemporaryMemoryBase + (CopySize >> 1));
  NewHeap = (VOID*)((UINTN)PermanentMemoryBase + (CopySize >> 1));

  StackMigrateOffset = (UINTN)NewStack - (UINTN)OldStack;

  //
  // Migrate Heap and Stack
  //
  CopyMem (NewHeap, OldHeap, CopySize >> 1);
  CopyMem (NewStack, OldStack, CopySize >> 1);

  //
  // Use SetJump()/LongJump() to switch to a new stack.
  //
  if (SetJump () == 0) {
#if defined (MDE_CPU_IA32)
JumpBuffer.Esp = JumpBuffer.Esp + StackMigrateOffset;
JumpBuffer.Ebp = JumpBuffer.Ebp + StackMigrateOffset;
#endif
#if defined (MDE_CPU_X64)
JumpBuffer.Rsp = JumpBuffer.Rsp + StackMigrateOffset;
JumpBuffer.Rbp = JumpBuffer.Rbp + StackMigrateOffset;
#endif
LongJump (, (UINTN)-1);
  }

  ZeroMem ((VOID *)(UINTN) TemporaryMemoryBase, CopySize);

  return EFI_SUCCESS;
}


Andrew,
I'd like to know why you chose to produce the migration PPI from
EmulatorPkg/Sec module.
Based on PI spec and current PeiCore implementation, PeiCore can do the 
migration when PPI is absent.




--
Thanks,
Ray
___
edk2-devel mailing list
edk2-devel@lists.01.org
https://lists.01.org/mailman/listinfo/edk2-devel

Re: [edk2] EmulatorPkg Unix Host Segmentation fault.

[Ni, Ray]

I also met this issue.
I found three solutions:
1. Forcing PeiMain CC flag to "-O0" works.
2. Changing EmulatorPkg/Sec to not produce TemporaryRamSupportPpi also 
works.
3. Implement the temporary migration routine as below in EmulatorPkg/Sec 
module.


EFI_STATUS
EFIAPI
SecTemporaryRamSupport (
  IN CONST EFI_PEI_SERVICES   **PeiServices,
  IN EFI_PHYSICAL_ADDRESS TemporaryMemoryBase,
  IN EFI_PHYSICAL_ADDRESS PermanentMemoryBase,
  IN UINTNCopySize
  )
{
  VOID *OldHeap;
  VOID *NewHeap;
  VOID *OldStack;
  VOID *NewStack;
  UINTNStackMigrateOffset;
  BASE_LIBRARY_JUMP_BUFFER JumpBuffer;

  DEBUG ((EFI_D_INFO,
"TemporaryRamMigration(0x%Lx, 0x%Lx, 0x%Lx)\n",
TemporaryMemoryBase,
PermanentMemoryBase,
(UINT64)CopySize
));

  //
  // Assume Host prepare the stack and heap in the temprary ram that stack
  // is below heap (stack is in smaller address).
  // Stack/heap migration depends on the stack/heap location information
  // in the temporary ram.
  //
  OldStack = (VOID*)(UINTN)TemporaryMemoryBase;
  NewStack = (VOID*)((UINTN)PermanentMemoryBase);

  OldHeap = (VOID*)((UINTN)TemporaryMemoryBase + (CopySize >> 1));
  NewHeap = (VOID*)((UINTN)PermanentMemoryBase + (CopySize >> 1));

  StackMigrateOffset = (UINTN)NewStack - (UINTN)OldStack;

  //
  // Migrate Heap and Stack
  //
  CopyMem (NewHeap, OldHeap, CopySize >> 1);
  CopyMem (NewStack, OldStack, CopySize >> 1);

  //
  // Use SetJump()/LongJump() to switch to a new stack.
  //
  if (SetJump () == 0) {
#if defined (MDE_CPU_IA32)
JumpBuffer.Esp = JumpBuffer.Esp + StackMigrateOffset;
JumpBuffer.Ebp = JumpBuffer.Ebp + StackMigrateOffset;
#endif
#if defined (MDE_CPU_X64)
JumpBuffer.Rsp = JumpBuffer.Rsp + StackMigrateOffset;
JumpBuffer.Rbp = JumpBuffer.Rbp + StackMigrateOffset;
#endif
LongJump (, (UINTN)-1);
  }

  ZeroMem ((VOID *)(UINTN) TemporaryMemoryBase, CopySize);

  return EFI_SUCCESS;
}


Andrew,
I'd like to know why you chose to produce the migration PPI from
EmulatorPkg/Sec module.
Based on PI spec and current PeiCore implementation, PeiCore can do the 
migration when PPI is absent.




--
Thanks,
Ray
___
edk2-devel mailing list
edk2-devel@lists.01.org
https://lists.01.org/mailman/listinfo/edk2-devel

Re: [edk2] EmulatorPkg Unix Host Segmentation fault.

[Ni, Ray]

I also met this issue.
I found three solutions:
1. Forcing PeiMain CC flag to "-O0" works.
2. Changing EmulatorPkg/Sec to not produce TemporaryRamSupportPpi also 
works.
3. Implement the temporary migration routine as below in EmulatorPkg/Sec 
module.


EFI_STATUS
EFIAPI
SecTemporaryRamSupport (
  IN CONST EFI_PEI_SERVICES   **PeiServices,
  IN EFI_PHYSICAL_ADDRESS TemporaryMemoryBase,
  IN EFI_PHYSICAL_ADDRESS PermanentMemoryBase,
  IN UINTNCopySize
  )
{
  VOID *OldHeap;
  VOID *NewHeap;
  VOID *OldStack;
  VOID *NewStack;
  UINTNStackMigrateOffset;
  BASE_LIBRARY_JUMP_BUFFER JumpBuffer;

  DEBUG ((EFI_D_INFO,
"TemporaryRamMigration(0x%Lx, 0x%Lx, 0x%Lx)\n",
TemporaryMemoryBase,
PermanentMemoryBase,
(UINT64)CopySize
));

  //
  // Assume Host prepare the stack and heap in the temprary ram that stack
  // is below heap (stack is in smaller address).
  // Stack/heap migration depends on the stack/heap location information
  // in the temporary ram.
  //
  OldStack = (VOID*)(UINTN)TemporaryMemoryBase;
  NewStack = (VOID*)((UINTN)PermanentMemoryBase);

  OldHeap = (VOID*)((UINTN)TemporaryMemoryBase + (CopySize >> 1));
  NewHeap = (VOID*)((UINTN)PermanentMemoryBase + (CopySize >> 1));

  StackMigrateOffset = (UINTN)NewStack - (UINTN)OldStack;

  //
  // Migrate Heap and Stack
  //
  CopyMem (NewHeap, OldHeap, CopySize >> 1);
  CopyMem (NewStack, OldStack, CopySize >> 1);

  //
  // Use SetJump()/LongJump() to switch to a new stack.
  //
  if (SetJump () == 0) {
#if defined (MDE_CPU_IA32)
JumpBuffer.Esp = JumpBuffer.Esp + StackMigrateOffset;
JumpBuffer.Ebp = JumpBuffer.Ebp + StackMigrateOffset;
#endif
#if defined (MDE_CPU_X64)
JumpBuffer.Rsp = JumpBuffer.Rsp + StackMigrateOffset;
JumpBuffer.Rbp = JumpBuffer.Rbp + StackMigrateOffset;
#endif
LongJump (, (UINTN)-1);
  }

  ZeroMem ((VOID *)(UINTN) TemporaryMemoryBase, CopySize);

  return EFI_SUCCESS;
}


Andrew,
I'd like to know why you chose to produce the migration PPI from
EmulatorPkg/Sec module.
Based on PI spec and current PeiCore implementation, PeiCore can do the 
migration when PPI is absent.




--
Thanks,
Ray
___
edk2-devel mailing list
edk2-devel@lists.01.org
https://lists.01.org/mailman/listinfo/edk2-devel

Re: [edk2] EmulatorPkg Unix Host Segmentation fault.

[Laszlo Ersek]

On 11/19/18 23:29, Jordan Justen wrote:
> On 2018-11-19 13:22:27, Andrew Fish wrote:

>> I seem to remember we hit an issue like this a long time ago? Do you
>> remember the details? Maybe it was we needed to write the
>> TempRamSupport code in assembly?
> 
> It does also creep up there, which is why we also adjust ebp/rbp in
> the TemporaryRamMigration function in OVMF.
> 
> In that case, it helps prevent the stack from reverting to the old
> stack when TemporaryRamMigration is returning to it's caller. (As
> opposed to after it returns, which I think is what is happening now.)

Right, in retrospect, I should have been clearer about this (= with
myself as well), when pointing out the commit that added the BP
massaging to OVMF's temp RAM migration. I just wanted to point out that
the BP massaging hadn't always been there in the OVMF code, so it wasn't
"part of the original design" or some such.

Thanks
Laszlo
___
edk2-devel mailing list
edk2-devel@lists.01.org
https://lists.01.org/mailman/listinfo/edk2-devel

Re: [edk2] EmulatorPkg Unix Host Segmentation fault.

[Andrew Fish]

> On Nov 19, 2018, at 2:29 PM, Jordan Justen  wrote:
> 
> On 2018-11-19 13:22:27, Andrew Fish wrote:
>> 
>> 
>>> On Nov 19, 2018, at 11:16 AM, Jordan Justen  
>>> wrote:
>>> 
>>> On 2018-11-18 17:13:21, Jordan Justen wrote:
 On 2018-11-18 14:37:09, Andrew Fish wrote:
> 
> 
>> On Nov 18, 2018, at 4:07 AM, Liu Yu  wrote:
>> 
>> sorry your  path can't fix this issue.   if this path just turn off 
>> optimization option within sec.c not global project.
>> 
>> I have tested different version GCC such as (GCC4,8, GCC5.x, GCC7.x)  
>> and all of them can duplicate this issue  (Ubuntu 16.04, 16.10,18.04 )
>> 
>> I have traced this issue on my hand.
>> 
>> you can see Dispatcher.c (MdeModulePkg/Pei/DIspatcher/) Line 792:
>> 
>> 
>> 790  if (StackOffsetPositive) {
>> 791   SecCoreData = (CONST EFI_SEC_PEI_HAND_OFF *)((UINTN)(VOID 
>> *)SecCoreData + StackOffset);
>> 792  Private = (PEI_CORE_INSTANCE *)((UINTN)(VOID *)Private + 
>> StackOffset);
>> 793 } else {
>> 794  ..
>> 795  ..
>> 796}
>> 
>> 790 --792 disassembly code
>> 
>> 0x10200f2ca :test %r14b,%r14b
>> 0x10200f2cd :je 0x10200f2df 
>> 
>> 0x10200f2cf :mov 0x38(%rsp),%rax
>> 0x10200f2d4 :lea 0x0(%rbp,%rax,1),%r14
>> 0x10200f2d9 :lea (%rbx,%rax,1),%rbp
>> 
>> we can see Private value have been stored in %rbp  (rbp register be 
>> used as general register )   so when call 
>> TemporaryRamSupportPpi->TemporaryRamMigration()
>> 
> 
> The calling conventions define RBP as non-volatile must be preserved
> by callee. Using RBP as the frame pointer is optional.
 
 This is kind of a mess. I think the definition of
 EFI_PEI_TEMPORARY_RAM_SUPPORT_PPI is really to blame. It probably
 should not have been spec'd as 'change stack and return'. Instead, it
 should have been given a new function pointer to switch-stack and call
 into.
>>> 
>>> Andrew, Mike,
>>> 
>>> I developed a PEI Core fix for this issue, which Liu Yu verified.
>>> 
>>> Unfortunately, it involves add assembly code in a key area of the PEI
>>> Core. See the top 2 commits of:
>>> 
>>> https://github.com/jljusten/edk2/commits/emulator-temp-ram 
>>> 
>>> 
>>> I only wrote assembly for X64 nasm. But, I notice that neither the PEI
>>> or DXE Core modules include any assembly code. So, I want to make sure
>>> I'm heading in the right direction before working on it further.
>>> 
>> 
>> Mike,
>> 
>> I seem to remember we hit an issue like this a long time ago? Do you
>> remember the details? Maybe it was we needed to write the
>> TempRamSupport code in assembly?
> 
> It does also creep up there, which is why we also adjust ebp/rbp in
> the TemporaryRamMigration function in OVMF.
> 
> In that case, it helps prevent the stack from reverting to the old
> stack when TemporaryRamMigration is returning to it's caller. (As
> opposed to after it returns, which I think is what is happening now.)
> 

The stack is switched in both cases. The problem is the C code, for the gcc 
code gen, does a leave so it moves %rbp into %rsp. The %rbp in the C code was 
the temp stack frame on entry. So the leave instruction from the C code gen 
reverts to the old stack. 


>> The issue we are hitting is the gEfiTemporaryRamSupportPpiGuid
>> TemporaryRamMigration() function call does a stack switch, but it
>> returns. This causes an issue with the C calling conventions as RBP
>> is optionally a frame pointer. To quote the MSFT spec: "May be used
>> as a frame pointer; must be preserved by callee"
>> 1) It is used as a frame pointer. It looks like our existing code
>> fixes up the frame pointer to match the new location the stack got
>> moved to.
>> 2) Used as a general purpose register, and the value must be
>> preserved.
> 
> This is true, and I think it makes writing TemporaryRamMigration in C
> unsafe. Nevertheless, we've been doing that in OVMF for a while now.
> 

The OVMF form is probably more portable as it is at least following the coding 
standards. 

What I've observed is clang (at least the Xcode version) does not use the leave 
instruction as it just does math to the %rsp directly and thus does not move 
the %rbp into %rsp. VC++ and some flavors of gcc don't emit the frame pointer. 
So there is dependency on code construction.  

>> 
>>> As I mentioned below, I think PIWG could consider an new
>>> TemporarayRemSupport interface that might work better, but that also
>>> may not be worth the effort.
>> 
>> If the current API is not really portable I don;t think it is a bad
>> idea to update it.
> 
> The trickier part is that the C ABI doesn't cover exactly how the
> stack may be used after the call to TemporaryRamMigration returns. For
> example, there's no reason that the compiler couldn't have saved the
> stack 

Re: [edk2] EmulatorPkg Unix Host Segmentation fault.

[Andrew Fish]

> On Nov 19, 2018, at 2:12 PM, Laszlo Ersek  wrote:
> 
> Jordan wrote:
> 
 So, is it safe to adjust rbp? Unknown. It may not be if rbp is not
 used as a frame pointer. Is it safe to *not* adjust rbp and
 potentially allow the old temp ram stack to be used? Unknown.
> 
> Andrew wrote:
> 
>> Looks like OvmfPkg uses SetJump()/LongJump() to change the stack. 
>> 
>>  //
>>  // Use SetJump()/LongJump() to switch to a new stack.
>>  // 
>>  if (SetJump () == 0) {
>> #if defined (MDE_CPU_IA32)
>>JumpBuffer.Esp = JumpBuffer.Esp + DebugAgentContext.StackMigrateOffset;
>>JumpBuffer.Ebp = JumpBuffer.Ebp + DebugAgentContext.StackMigrateOffset;
>> #endif
>> #if defined (MDE_CPU_X64)
>>JumpBuffer.Rsp = JumpBuffer.Rsp + DebugAgentContext.StackMigrateOffset;
>>JumpBuffer.Rbp = JumpBuffer.Rbp + DebugAgentContext.StackMigrateOffset;
>> #endif
>>LongJump (, (UINTN)-1);
>>  }
>> 
>>  SaveAndSetDebugTimerInterrupt (OldStatus);
>> 
>>  return EFI_SUCCESS;
>> }
>> 
>> But given the above code is C code RBP is going to be restored on return. 
>> This would seem to imply that the adjusting of the callers RBP is not 
>> required? [...]
> 
> The Ebp/Rbp assignments were added in a separate bugfix, namely
> 
>  https://github.com/tianocore/edk2/commit/89796c69d9fd
> 

Laszlo,

This makes sense since as the post-amble when using frame pointers is either:

addq$288, %rsp  ## imm = 0x120
popq%rbp
retq

or 

>0xfffcd42f <+403>: c9  leaveq
>0xfffcd430 <+404>: c3  retq

I've noticed that clang does not seem to be a big fan of the leave function and 
it adjusts the stack pointer using math rather than using %rbp. 

The stack unwind algorithm implies that the frame point, %rbp in our case, is 
valid while the function is running. Even for the clang code gen not switching 
the frame point would break the stack unwind. 

Thanks,

Andrew Fish 



> Laszlo

___
edk2-devel mailing list
edk2-devel@lists.01.org
https://lists.01.org/mailman/listinfo/edk2-devel

Re: [edk2] EmulatorPkg Unix Host Segmentation fault.

[Jordan Justen]

On 2018-11-19 13:22:27, Andrew Fish wrote:
> 
> 
> > On Nov 19, 2018, at 11:16 AM, Jordan Justen  
> > wrote:
> > 
> > On 2018-11-18 17:13:21, Jordan Justen wrote:
> >> On 2018-11-18 14:37:09, Andrew Fish wrote:
> >>> 
> >>> 
>  On Nov 18, 2018, at 4:07 AM, Liu Yu  wrote:
>  
>  sorry your  path can't fix this issue.   if this path just turn off 
>  optimization option within sec.c not global project.
>  
>  I have tested different version GCC such as (GCC4,8, GCC5.x, GCC7.x)  
>  and all of them can duplicate this issue  (Ubuntu 16.04, 16.10,18.04 )
>  
>  I have traced this issue on my hand.
>  
>  you can see Dispatcher.c (MdeModulePkg/Pei/DIspatcher/) Line 792:
>  
>  
>  790  if (StackOffsetPositive) {
>  791   SecCoreData = (CONST EFI_SEC_PEI_HAND_OFF *)((UINTN)(VOID 
>  *)SecCoreData + StackOffset);
>  792  Private = (PEI_CORE_INSTANCE *)((UINTN)(VOID *)Private + 
>  StackOffset);
>  793 } else {
>  794  ..
>  795  ..
>  796}
>  
>  790 --792 disassembly code
>  
>  0x10200f2ca :test %r14b,%r14b
>  0x10200f2cd :je 0x10200f2df 
>  
>  0x10200f2cf :mov 0x38(%rsp),%rax
>  0x10200f2d4 :lea 0x0(%rbp,%rax,1),%r14
>  0x10200f2d9 :lea (%rbx,%rax,1),%rbp
>  
>  we can see Private value have been stored in %rbp  (rbp register be 
>  used as general register )   so when call 
>  TemporaryRamSupportPpi->TemporaryRamMigration()
>  
> >>> 
> >>> The calling conventions define RBP as non-volatile must be preserved
> >>> by callee. Using RBP as the frame pointer is optional.
> >> 
> >> This is kind of a mess. I think the definition of
> >> EFI_PEI_TEMPORARY_RAM_SUPPORT_PPI is really to blame. It probably
> >> should not have been spec'd as 'change stack and return'. Instead, it
> >> should have been given a new function pointer to switch-stack and call
> >> into.
> > 
> > Andrew, Mike,
> > 
> > I developed a PEI Core fix for this issue, which Liu Yu verified.
> > 
> > Unfortunately, it involves add assembly code in a key area of the PEI
> > Core. See the top 2 commits of:
> > 
> > https://github.com/jljusten/edk2/commits/emulator-temp-ram 
> > 
> > 
> > I only wrote assembly for X64 nasm. But, I notice that neither the PEI
> > or DXE Core modules include any assembly code. So, I want to make sure
> > I'm heading in the right direction before working on it further.
> > 
> 
> Mike,
> 
> I seem to remember we hit an issue like this a long time ago? Do you
> remember the details? Maybe it was we needed to write the
> TempRamSupport code in assembly?

It does also creep up there, which is why we also adjust ebp/rbp in
the TemporaryRamMigration function in OVMF.

In that case, it helps prevent the stack from reverting to the old
stack when TemporaryRamMigration is returning to it's caller. (As
opposed to after it returns, which I think is what is happening now.)

> The issue we are hitting is the gEfiTemporaryRamSupportPpiGuid
> TemporaryRamMigration() function call does a stack switch, but it
> returns. This causes an issue with the C calling conventions as RBP
> is optionally a frame pointer. To quote the MSFT spec: "May be used
> as a frame pointer; must be preserved by callee"
> 1) It is used as a frame pointer. It looks like our existing code
> fixes up the frame pointer to match the new location the stack got
> moved to.
> 2) Used as a general purpose register, and the value must be
> preserved.

This is true, and I think it makes writing TemporaryRamMigration in C
unsafe. Nevertheless, we've been doing that in OVMF for a while now.

> 
> > As I mentioned below, I think PIWG could consider an new
> > TemporarayRemSupport interface that might work better, but that also
> > may not be worth the effort.
> 
> If the current API is not really portable I don;t think it is a bad
> idea to update it.

The trickier part is that the C ABI doesn't cover exactly how the
stack may be used after the call to TemporaryRamMigration returns. For
example, there's no reason that the compiler couldn't have saved the
stack pointer onto the stack (which was migrated) and somehow restore
it to an old value from the migrated stack.

I think the only safe way to implement calling the current
TemporaryRamMigration is by using assembly code, and then calling into
a new function from the assembly code. Once we call into a new C
function, there is no way C code-gen can accidentally restore the old
stack pointer.

> > 
> > Can something like this change be integrated into the PEI Core?
> 
> Jordan,
> 
> I'm not sure?

Part of my question was whether assembly code was allowed in the PEI
Core.

> For the RBP == frame pointer case the frame pointer is
> no longer valid (it is in temp RAM, not DRAM). It seems like the
> point of SecTemporaryRamSupport() fixing up the callers RBP is for

Re: [edk2] EmulatorPkg Unix Host Segmentation fault.

[Andrew Fish]

> On Nov 19, 2018, at 11:16 AM, Jordan Justen  wrote:
> 
> On 2018-11-18 17:13:21, Jordan Justen wrote:
>> On 2018-11-18 14:37:09, Andrew Fish wrote:
>>> 
>>> 
 On Nov 18, 2018, at 4:07 AM, Liu Yu  wrote:
 
 sorry your  path can't fix this issue.   if this path just turn off 
 optimization option within sec.c not global project.
 
 I have tested different version GCC such as (GCC4,8, GCC5.x, GCC7.x)  
 and all of them can duplicate this issue  (Ubuntu 16.04, 16.10,18.04 )
 
 I have traced this issue on my hand.
 
 you can see Dispatcher.c (MdeModulePkg/Pei/DIspatcher/) Line 792:
 
 
 790  if (StackOffsetPositive) {
 791   SecCoreData = (CONST EFI_SEC_PEI_HAND_OFF *)((UINTN)(VOID 
 *)SecCoreData + StackOffset);
 792  Private = (PEI_CORE_INSTANCE *)((UINTN)(VOID *)Private + 
 StackOffset);
 793 } else {
 794  ..
 795  ..
 796}
 
 790 --792 disassembly code
 
 0x10200f2ca :test %r14b,%r14b
 0x10200f2cd :je 0x10200f2df 
 
 0x10200f2cf :mov 0x38(%rsp),%rax
 0x10200f2d4 :lea 0x0(%rbp,%rax,1),%r14
 0x10200f2d9 :lea (%rbx,%rax,1),%rbp
 
 we can see Private value have been stored in %rbp  (rbp register be 
 used as general register )   so when call 
 TemporaryRamSupportPpi->TemporaryRamMigration()
 
>>> 
>>> The calling conventions define RBP as non-volatile must be preserved
>>> by callee. Using RBP as the frame pointer is optional.
>> 
>> This is kind of a mess. I think the definition of
>> EFI_PEI_TEMPORARY_RAM_SUPPORT_PPI is really to blame. It probably
>> should not have been spec'd as 'change stack and return'. Instead, it
>> should have been given a new function pointer to switch-stack and call
>> into.
> 
> Andrew, Mike,
> 
> I developed a PEI Core fix for this issue, which Liu Yu verified.
> 
> Unfortunately, it involves add assembly code in a key area of the PEI
> Core. See the top 2 commits of:
> 
> https://github.com/jljusten/edk2/commits/emulator-temp-ram 
> 
> 
> I only wrote assembly for X64 nasm. But, I notice that neither the PEI
> or DXE Core modules include any assembly code. So, I want to make sure
> I'm heading in the right direction before working on it further.
> 

Mike,

I seem to remember we hit an issue like this a long time ago? Do you remember 
the details? Maybe it was we needed to write the TempRamSupport code in 
assembly? 

The issue we are hitting is the gEfiTemporaryRamSupportPpiGuid 
TemporaryRamMigration() function call does a stack switch, but it returns. This 
causes an issue with the C calling conventions as RBP is optionally a frame 
pointer. To quote the MSFT spec: "May be used as a frame pointer; must be 
preserved by callee"
1) It is used as a frame pointer. It looks like our existing code fixes up the 
frame pointer to match the new location the stack got moved to.
2) Used as a general purpose register, and the value must be preserved. 

> As I mentioned below, I think PIWG could consider an new
> TemporarayRemSupport interface that might work better, but that also
> may not be worth the effort.

If the current API is not really portable I don;t think it is a bad idea to 
update it. 

> 
> Can something like this change be integrated into the PEI Core?

Jordan,

I'm not sure? For the RBP == frame pointer case the frame pointer is no longer 
valid (it is in temp RAM, not DRAM). It seems like the point of 
SecTemporaryRamSupport() fixing up the callers RBP is for the benefit of the 
caller. It looks to me like your fix is just negating that fixup. So that would 
imply that either we could just fix this in SecTemporaryRamSupport() or we have 
2 code gen paths and we need to know how the compiler is using RBP to "do the 
right thing" 

Do we have other code that supports X64 PEI? Is see OvmfPkg
https://github.com/tianocore/edk2/blob/master/OvmfPkg/Sec/SecMain.c#L875

Looks like OvmfPkg uses SetJump()/LongJump() to change the stack. 

  //
  // Use SetJump()/LongJump() to switch to a new stack.
  // 
  if (SetJump () == 0) {
#if defined (MDE_CPU_IA32)
JumpBuffer.Esp = JumpBuffer.Esp + DebugAgentContext.StackMigrateOffset;
JumpBuffer.Ebp = JumpBuffer.Ebp + DebugAgentContext.StackMigrateOffset;
#endif
#if defined (MDE_CPU_X64)
JumpBuffer.Rsp = JumpBuffer.Rsp + DebugAgentContext.StackMigrateOffset;
JumpBuffer.Rbp = JumpBuffer.Rbp + DebugAgentContext.StackMigrateOffset;
#endif
LongJump (, (UINTN)-1);
  }

  SaveAndSetDebugTimerInterrupt (OldStatus);

  return EFI_SUCCESS;
}

But given the above code is C code RBP is going to be restored on return. This 
would seem to imply that the adjusting of the callers RBP is not required? So 
maybe try changing over Emulator to the OvmfPkg TemporaryRamMigration() 
algorithm? 

Thanks,

Andrew Fish

> 
> Thanks for your time,
> 
> -Jordan
> 
>> 

Re: [edk2] EmulatorPkg Unix Host Segmentation fault.

[Jordan Justen]

On 2018-11-18 17:13:21, Jordan Justen wrote:
> On 2018-11-18 14:37:09, Andrew Fish wrote:
> > 
> > 
> > > On Nov 18, 2018, at 4:07 AM, Liu Yu  wrote:
> > > 
> > > sorry your  path can't fix this issue.   if this path just turn off 
> > > optimization option within sec.c not global project.
> > > 
> > > I have tested different version GCC such as (GCC4,8, GCC5.x, GCC7.x)  
> > > and all of them can duplicate this issue  (Ubuntu 16.04, 16.10,18.04 )
> > > 
> > > I have traced this issue on my hand.
> > > 
> > > you can see Dispatcher.c (MdeModulePkg/Pei/DIspatcher/) Line 792:
> > > 
> > > 
> > > 790  if (StackOffsetPositive) {
> > > 791   SecCoreData = (CONST EFI_SEC_PEI_HAND_OFF *)((UINTN)(VOID 
> > > *)SecCoreData + StackOffset);
> > > 792  Private = (PEI_CORE_INSTANCE *)((UINTN)(VOID *)Private + 
> > > StackOffset);
> > > 793 } else {
> > > 794  ..
> > > 795  ..
> > > 796}
> > > 
> > >  790 --792 disassembly code
> > > 
> > >  0x10200f2ca :test %r14b,%r14b
> > >  0x10200f2cd :je 0x10200f2df 
> > > 
> > >  0x10200f2cf :mov 0x38(%rsp),%rax
> > >  0x10200f2d4 :lea 0x0(%rbp,%rax,1),%r14
> > >  0x10200f2d9 :lea (%rbx,%rax,1),%rbp
> > > 
> > >  we can see Private value have been stored in %rbp  (rbp register be 
> > > used as general register )   so when call 
> > > TemporaryRamSupportPpi->TemporaryRamMigration()
> > > 
> > 
> > The calling conventions define RBP as non-volatile must be preserved
> > by callee. Using RBP as the frame pointer is optional.
> 
> This is kind of a mess. I think the definition of
> EFI_PEI_TEMPORARY_RAM_SUPPORT_PPI is really to blame. It probably
> should not have been spec'd as 'change stack and return'. Instead, it
> should have been given a new function pointer to switch-stack and call
> into.

Andrew, Mike,

I developed a PEI Core fix for this issue, which Liu Yu verified.

Unfortunately, it involves add assembly code in a key area of the PEI
Core. See the top 2 commits of:

https://github.com/jljusten/edk2/commits/emulator-temp-ram

I only wrote assembly for X64 nasm. But, I notice that neither the PEI
or DXE Core modules include any assembly code. So, I want to make sure
I'm heading in the right direction before working on it further.

As I mentioned below, I think PIWG could consider an new
TemporarayRemSupport interface that might work better, but that also
may not be worth the effort.

Can something like this change be integrated into the PEI Core?

Thanks for your time,

-Jordan

> By returning with a switched stack, we don't really know what the
> returning code could do with regard to the stack. For example, it
> could have saved the stack value on the stack and then pop it into a
> register and somehow switch the stack back to the old stack. It seems
> unlikely, but I don't think anything prevents it.
> 
> Additionally, there is the issue of rbp/ebp being used as a frame
> pointer. This can lead to some variables being used from the temp ram
> location after we return from TemporaryRamMigration. (Assuming rbp/ebp
> is not adjusted to point to the new stack.)
> 
> So, is it safe to adjust rbp? Unknown. It may not be if rbp is not
> used as a frame pointer. Is it safe to *not* adjust rbp and
> potentially allow the old temp ram stack to be used? Unknown.
> 
> Now, if TemporaryRamMigration received a new function to call into, we
> can safely assume that the new stack transition would proceed as
> expected without having to worry if a compiler is using rbp/ebp as a
> framepointer or not.
> 
> Another advantage could have been that something like the BasePkg
> SwitchStack function could have been used, hopefully preventing people
> from trying to write error prone assembly code for
> TemporaryRamMigration.
> 
> -Jordan
___
edk2-devel mailing list
edk2-devel@lists.01.org
https://lists.01.org/mailman/listinfo/edk2-devel

Re: [edk2] EmulatorPkg Unix Host Segmentation fault.

[Jordan Justen]

On 2018-11-18 14:37:09, Andrew Fish wrote:
> 
> 
> > On Nov 18, 2018, at 4:07 AM, Liu Yu  wrote:
> > 
> > sorry your  path can't fix this issue.   if this path just turn off 
> > optimization option within sec.c not global project.
> > 
> > I have tested different version GCC such as (GCC4,8, GCC5.x, GCC7.x)  
> > and all of them can duplicate this issue  (Ubuntu 16.04, 16.10,18.04 )
> > 
> > I have traced this issue on my hand.
> > 
> > you can see Dispatcher.c (MdeModulePkg/Pei/DIspatcher/) Line 792:
> > 
> > 
> > 790  if (StackOffsetPositive) {
> > 791   SecCoreData = (CONST EFI_SEC_PEI_HAND_OFF *)((UINTN)(VOID 
> > *)SecCoreData + StackOffset);
> > 792  Private = (PEI_CORE_INSTANCE *)((UINTN)(VOID *)Private + 
> > StackOffset);
> > 793 } else {
> > 794  ..
> > 795  ..
> > 796}
> > 
> >  790 --792 disassembly code
> > 
> >  0x10200f2ca :test %r14b,%r14b
> >  0x10200f2cd :je 0x10200f2df 
> > 
> >  0x10200f2cf :mov 0x38(%rsp),%rax
> >  0x10200f2d4 :lea 0x0(%rbp,%rax,1),%r14
> >  0x10200f2d9 :lea (%rbx,%rax,1),%rbp
> > 
> >  we can see Private value have been stored in %rbp  (rbp register be 
> > used as general register )   so when call 
> > TemporaryRamSupportPpi->TemporaryRamMigration()
> > 
> 
> The calling conventions define RBP as non-volatile must be preserved
> by callee. Using RBP as the frame pointer is optional.

This is kind of a mess. I think the definition of
EFI_PEI_TEMPORARY_RAM_SUPPORT_PPI is really to blame. It probably
should not have been spec'd as 'change stack and return'. Instead, it
should have been given a new function pointer to switch-stack and call
into.

By returning with a switched stack, we don't really know what the
returning code could do with regard to the stack. For example, it
could have saved the stack value on the stack and then pop it into a
register and somehow switch the stack back to the old stack. It seems
unlikely, but I don't think anything prevents it.

Additionally, there is the issue of rbp/ebp being used as a frame
pointer. This can lead to some variables being used from the temp ram
location after we return from TemporaryRamMigration. (Assuming rbp/ebp
is not adjusted to point to the new stack.)

So, is it safe to adjust rbp? Unknown. It may not be if rbp is not
used as a frame pointer. Is it safe to *not* adjust rbp and
potentially allow the old temp ram stack to be used? Unknown.

Now, if TemporaryRamMigration received a new function to call into, we
can safely assume that the new stack transition would proceed as
expected without having to worry if a compiler is using rbp/ebp as a
framepointer or not.

Another advantage could have been that something like the BasePkg
SwitchStack function could have been used, hopefully preventing people
from trying to write error prone assembly code for
TemporaryRamMigration.

-Jordan

> Is it possible the assembly coder is assuming RBP is a frame
> pointer? That would imply for gcc/clang the correct answer would be
> to have compiler flags force frame pointer usage?
> 
> Assuming -O 0 does something seems like we are matching an
> implementation at a given point in time. I'd rather force the frame
> pointer usage (that is optional in the ABI) if that fixes the RBP
> usage assumption. I guess the other option would be to have
> different assembler if the compiler is using frame pointers or not.
> and I don't think we have that concept.
> 
> Given this is the common frame pointer pattern:
> 
> pushq   %rbp
> movq%rsp, %rbp
> ...
> popq%rbp
> retq
> 
> It follows the calling convention rules even if the frame pointer is
> not in general use. Thus it only seems like you would hit issues
> when you move the stack around.
> 
> Thanks,
> 
> Andrew Fish
> 
> PS Xcode clang always emits the frame pointer. 
> 
> > this function would modify rbp value because it treat rbp as "stack base 
> > address ".
> > 
> > 816 MigrateMemoryPages (Private, TRUE);
> > 
> > // Private pointer point to other address, so this function would get a 
> > NULL pointer that result in segment fault
> > 
> > I think we can turn off optimization options like this.
> > 
> > 1. modify  EmulatorPkg.dsc
> > 
> >   MdeModulePkg/Core/Pei/PeiMain.inf {
> >  
> >   GCC:*_*_*_CC_FLAGS = -O0
> >   }
> > 
> > Reference GCC Manual description:
> > 
> >   -O also turns on -fomit-frame-pointer on machines where doing so does 
> > not interfere with debugging.
> > 
> > 
> > 
> > 在 2018/11/18 下午5:27, Jordan Justen 写道:
> >> On 2018-11-17 20:51:11, Liu Yu wrote:
> >>> OS: Ubuntu
> >>> 
> >>> Toolchain:GCC48
> >> I don't have gcc-4.8, so I couldn't reproduce the issue, but I wonder
> >> if this branch can fix the issue for you?
> >> 
> >> https://github.com/jljusten/edk2/tree/emulator-temp-ram
> >> 
> >> You can fetch this branch locally to a branch named `test` with a
> >> command like this:
> >> 
> >> $ git fetch --no-tags 

Re: [edk2] EmulatorPkg Unix Host Segmentation fault.

[Andrew Fish]

> On Nov 18, 2018, at 4:07 AM, Liu Yu  wrote:
> 
> sorry your  path can't fix this issue.   if this path just turn off 
> optimization option within sec.c not global project.
> 
> I have tested different version GCC such as (GCC4,8, GCC5.x, GCC7.x)  
> and all of them can duplicate this issue  (Ubuntu 16.04, 16.10,18.04 )
> 
> I have traced this issue on my hand.
> 
> you can see Dispatcher.c (MdeModulePkg/Pei/DIspatcher/) Line 792:
> 
> 
> 790  if (StackOffsetPositive) {
> 791   SecCoreData = (CONST EFI_SEC_PEI_HAND_OFF *)((UINTN)(VOID 
> *)SecCoreData + StackOffset);
> 792  Private = (PEI_CORE_INSTANCE *)((UINTN)(VOID *)Private + 
> StackOffset);
> 793 } else {
> 794  ..
> 795  ..
> 796}
> 
>  790 --792 disassembly code
> 
>  0x10200f2ca :test %r14b,%r14b
>  0x10200f2cd :je 0x10200f2df 
> 
>  0x10200f2cf :mov 0x38(%rsp),%rax
>  0x10200f2d4 :lea 0x0(%rbp,%rax,1),%r14
>  0x10200f2d9 :lea (%rbx,%rax,1),%rbp
> 
>  we can see Private value have been stored in %rbp  (rbp register be 
> used as general register )   so when call 
> TemporaryRamSupportPpi->TemporaryRamMigration()
> 

The calling conventions define RBP as non-volatile must be preserved by callee. 
Using RBP as the frame pointer is optional. 

Is it possible the assembly coder is assuming RBP is a frame pointer? That 
would imply for gcc/clang the correct answer would be to have compiler flags 
force frame pointer usage? 

Assuming -O 0 does something seems like we are matching an implementation at a 
given point in time. I'd rather force the frame pointer usage (that is optional 
in the ABI) if that fixes the RBP usage assumption. I guess the other option 
would be to have different assembler if the compiler is using frame pointers or 
not. and I don't think we have that concept. 

Given this is the common frame pointer pattern:

pushq   %rbp
movq%rsp, %rbp
...
popq%rbp
retq

It follows the calling convention rules even if the frame pointer is not in 
general use. Thus it only seems like you would hit issues when you move the 
stack around. 

Thanks,

Andrew Fish

PS Xcode clang always emits the frame pointer. 

> this function would modify rbp value because it treat rbp as "stack base 
> address ".
> 
> 816 MigrateMemoryPages (Private, TRUE);
> 
> // Private pointer point to other address, so this function would get a 
> NULL pointer that result in segment fault
> 
> I think we can turn off optimization options like this.
> 
> 1. modify  EmulatorPkg.dsc
> 
>   MdeModulePkg/Core/Pei/PeiMain.inf {
>  
>   GCC:*_*_*_CC_FLAGS = -O0
>   }
> 
> Reference GCC Manual description:
> 
>   -O also turns on -fomit-frame-pointer on machines where doing so does 
> not interfere with debugging.
> 
> 
> 
> 在 2018/11/18 下午5:27, Jordan Justen 写道:
>> On 2018-11-17 20:51:11, Liu Yu wrote:
>>> OS: Ubuntu
>>> 
>>> Toolchain:GCC48
>> I don't have gcc-4.8, so I couldn't reproduce the issue, but I wonder
>> if this branch can fix the issue for you?
>> 
>> https://github.com/jljusten/edk2/tree/emulator-temp-ram
>> 
>> You can fetch this branch locally to a branch named `test` with a
>> command like this:
>> 
>> $ git fetch --no-tags https://github.com/jljusten/edk2.git 
>> emulator-temp-ram:test
>> 
>> Then checkout the `test` branch to try it.
>> 
>> First, there is some patches to cleanup Sec, but then I added a patch:
>> 
>> 53a432e149 "EmulatorPkg/Sec: Disable optimizations for TemporaryRamMigration 
>> function"
>> 
>> Which I hope might help in your case.
>> 
>> -Jordan
>> 
>>> Issue Description :
>>> 
>>>   Program received signal SIGSEGV, Segmentation fault.
>>>at 
>>> /home/pedroa/workspace/orign/edkcrb/MdeModulePkg/Core/Pei/Memory/MemoryServices.c:129
>>> 129  Private->MemoryPages.Size = (UINTN) 
>>> (Private->HobList.HandoffInformationTable->EfiMemoryTop -
>>> 
>>> 
>>> if the GCC optimization option is used not -O0 so the "rbp" register will 
>>> be used as "general register"
>>> 
>>> in the SecTemporaryRamSupport function as below, this function will modify 
>>> the rbp (as general register not stack base address pointer)value that 
>>> result in program crash.
>>> 
>>> ASM_PFX(SecTemporaryRamSupport):
>>>   // Adjust callers %rbp to account for stack move
>>>   subq%rdx, %rbp // Calc offset of %rbp in Temp Memory
>>>   addq%r8,  %rbp // add in permanent base to offset
>>> 
>>> ___
>>> edk2-devel mailing list
>>> edk2-devel@lists.01.org
>>> https://lists.01.org/mailman/listinfo/edk2-devel

___
edk2-devel mailing list
edk2-devel@lists.01.org
https://lists.01.org/mailman/listinfo/edk2-devel

Re: [edk2] EmulatorPkg Unix Host Segmentation fault.

[Liu Yu]

sorry your  path can't fix this issue.   if this path just turn off 
optimization option within sec.c not global project.

I have tested different version GCC such as (GCC4,8, GCC5.x, GCC7.x)  
and all of them can duplicate this issue  (Ubuntu 16.04, 16.10,18.04 )

I have traced this issue on my hand.

you can see Dispatcher.c (MdeModulePkg/Pei/DIspatcher/) Line 792:


790  if (StackOffsetPositive) {
791   SecCoreData = (CONST EFI_SEC_PEI_HAND_OFF *)((UINTN)(VOID 
*)SecCoreData + StackOffset);
792  Private = (PEI_CORE_INSTANCE *)((UINTN)(VOID *)Private + 
StackOffset);
793     } else {
794  ..
795  ..
796    }

  790 --792 disassembly code

  0x10200f2ca :    test %r14b,%r14b
  0x10200f2cd :    je 0x10200f2df 

  0x10200f2cf :    mov 0x38(%rsp),%rax
  0x10200f2d4 :    lea 0x0(%rbp,%rax,1),%r14
  0x10200f2d9 :    lea (%rbx,%rax,1),%rbp

  we can see Private value have been stored in %rbp  (rbp register be 
used as general register )   so when call 
TemporaryRamSupportPpi->TemporaryRamMigration()

this function would modify rbp value because it treat rbp as "stack base 
address ".

816     MigrateMemoryPages (Private, TRUE);

// Private pointer point to other address, so this function would get a 
NULL pointer that result in segment fault

I think we can turn off optimization options like this.

1. modify  EmulatorPkg.dsc

       MdeModulePkg/Core/Pei/PeiMain.inf {
  
   GCC:*_*_*_CC_FLAGS = -O0
   }

Reference GCC Manual description:

   -O also turns on -fomit-frame-pointer on machines where doing so does 
not interfere with debugging.



在 2018/11/18 下午5:27, Jordan Justen 写道:
> On 2018-11-17 20:51:11, Liu Yu wrote:
>> OS: Ubuntu
>>
>> Toolchain:GCC48
> I don't have gcc-4.8, so I couldn't reproduce the issue, but I wonder
> if this branch can fix the issue for you?
>
> https://github.com/jljusten/edk2/tree/emulator-temp-ram
>
> You can fetch this branch locally to a branch named `test` with a
> command like this:
>
> $ git fetch --no-tags https://github.com/jljusten/edk2.git 
> emulator-temp-ram:test
>
> Then checkout the `test` branch to try it.
>
> First, there is some patches to cleanup Sec, but then I added a patch:
>
> 53a432e149 "EmulatorPkg/Sec: Disable optimizations for TemporaryRamMigration 
> function"
>
> Which I hope might help in your case.
>
> -Jordan
>
>> Issue Description :
>>
>>Program received signal SIGSEGV, Segmentation fault.
>> at 
>> /home/pedroa/workspace/orign/edkcrb/MdeModulePkg/Core/Pei/Memory/MemoryServices.c:129
>> 129  Private->MemoryPages.Size = (UINTN) 
>> (Private->HobList.HandoffInformationTable->EfiMemoryTop -
>>
>>
>> if the GCC optimization option is used not -O0 so the "rbp" register will be 
>> used as "general register"
>>
>> in the SecTemporaryRamSupport function as below, this function will modify 
>> the rbp (as general register not stack base address pointer)value that 
>> result in program crash.
>>
>> ASM_PFX(SecTemporaryRamSupport):
>>// Adjust callers %rbp to account for stack move
>>subq%rdx, %rbp // Calc offset of %rbp in Temp Memory
>>addq%r8,  %rbp // add in permanent base to offset
>>
>> ___
>> edk2-devel mailing list
>> edk2-devel@lists.01.org
>> https://lists.01.org/mailman/listinfo/edk2-devel
___
edk2-devel mailing list
edk2-devel@lists.01.org
https://lists.01.org/mailman/listinfo/edk2-devel

Re: [edk2] EmulatorPkg Unix Host Segmentation fault.

[Jordan Justen]

On 2018-11-17 20:51:11, Liu Yu wrote:
> OS: Ubuntu
> 
> Toolchain:GCC48

I don't have gcc-4.8, so I couldn't reproduce the issue, but I wonder
if this branch can fix the issue for you?

https://github.com/jljusten/edk2/tree/emulator-temp-ram

You can fetch this branch locally to a branch named `test` with a
command like this:

$ git fetch --no-tags https://github.com/jljusten/edk2.git 
emulator-temp-ram:test

Then checkout the `test` branch to try it.

First, there is some patches to cleanup Sec, but then I added a patch:

53a432e149 "EmulatorPkg/Sec: Disable optimizations for TemporaryRamMigration 
function"

Which I hope might help in your case.

-Jordan

> 
> Issue Description :
> 
>   Program received signal SIGSEGV, Segmentation fault.
>at 
> /home/pedroa/workspace/orign/edkcrb/MdeModulePkg/Core/Pei/Memory/MemoryServices.c:129
> 129  Private->MemoryPages.Size = (UINTN) 
> (Private->HobList.HandoffInformationTable->EfiMemoryTop -
> 
> 
> if the GCC optimization option is used not -O0 so the "rbp" register will be 
> used as "general register"
> 
> in the SecTemporaryRamSupport function as below, this function will modify 
> the rbp (as general register not stack base address pointer)value that result 
> in program crash.
> 
> ASM_PFX(SecTemporaryRamSupport):
>   // Adjust callers %rbp to account for stack move
>   subq%rdx, %rbp // Calc offset of %rbp in Temp Memory
>   addq%r8,  %rbp // add in permanent base to offset
> 
> ___
> edk2-devel mailing list
> edk2-devel@lists.01.org
> https://lists.01.org/mailman/listinfo/edk2-devel
___
edk2-devel mailing list
edk2-devel@lists.01.org
https://lists.01.org/mailman/listinfo/edk2-devel

[edk2] EmulatorPkg Unix Host Segmentation fault.

[Liu Yu]

OS: Ubuntu

Toolchain:GCC48

Issue Description :

  Program received signal SIGSEGV, Segmentation fault.
   at 
/home/pedroa/workspace/orign/edkcrb/MdeModulePkg/Core/Pei/Memory/MemoryServices.c:129
129  Private->MemoryPages.Size = (UINTN) 
(Private->HobList.HandoffInformationTable->EfiMemoryTop -


if the GCC optimization option is used not -O0 so the "rbp" register will be 
used as "general register"

in the SecTemporaryRamSupport function as below, this function will modify the 
rbp (as general register not stack base address pointer)value that result in 
program crash.

ASM_PFX(SecTemporaryRamSupport):
  // Adjust callers %rbp to account for stack move
  subq%rdx, %rbp // Calc offset of %rbp in Temp Memory
  addq%r8,  %rbp // add in permanent base to offset

___
edk2-devel mailing list
edk2-devel@lists.01.org
https://lists.01.org/mailman/listinfo/edk2-devel