on 8-8-2008 2:01 PM Edmundo Robles L. spake the following:
Hi! After read and do it all your suggests, i dettached all the nics
and attached one of them then i was able to reach de setup web page,
this indicate to me the problem was by a bad ethernet nic,
Whatever i want to thank your help, you
EFW.
-Mensaje original-
De: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] En nombre de Scott Silva
Enviado el: Viernes, 08 de Agosto de 2008 15:38
Para: efw-user@lists.sourceforge.net
Asunto: Re: [Efw-user] I c an't configure nics on EFW 2.1.2
on 8-8-2008 9:40 AM Edmundo Robles L. spak
on 8-8-2008 9:40 AM Edmundo Robles L. spake the following:
Yes, it was attached, for that i am
-Mensaje original-
Attached to switch, or to another PC. And if to another PC did you use a
crossover cable?
--
MailScanner is like deodorant...
You hope everybody uses it, and
you noti
Yes, it was attached, for that i am
-Mensaje original-
De: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] En nombre de Scott Silva
Enviado el: Viernes, 08 de Agosto de 2008 11:11
Para: efw-user@lists.sourceforge.net
Asunto: Re: [Efw-user] I c an't configure nics on EFW 2.1.2
on 8-8
on 8-8-2008 8:32 AM Edmundo Robles L. spake the following:
Hi! Here is the output of ethtool with all the nics and the ifconfig
output, also i tried to switch the ethernet cable but i got the same
result, i can't reach the page :-(
Was a cable attached to any port when you ran that? Ethto
do el: Viernes, 08 de Agosto de 2008 07:02
Para: efw-user@lists.sourceforge.net
Asunto: Re: [Efw-user] I c an't configure nics on EFW 2.1.2
[EMAIL PROTECTED] wrote:
>
> Have you tried switching the Ethernet cables? Perhaps the internal
> nic isn't
[EMAIL PROTECTED] wrote:
>
> Have you tried switching the Ethernet cables? Perhaps the internal
> nic isn’t the one you think it is.
>
>
>
>
>
> Hi!
>
> I just finished to install EFW, then when i try to setup by web
e.net
Subject: [Efw-user] I c an't configure nics on EFW 2.1.2
Hi!
I just finished to install EFW, then when i try to setup by web but
i dont reach the page, then i started with a shell console and check the
nics configuration
I have the next interfaces :
br0up with an ip 19
Hi!
I just finished to install EFW, then when i try to setup by web but
i dont reach the page, then i started with a shell console and check the
nics configuration
I have the next interfaces :
br0up with an ip 192.168.0.15
eth0 up with no ip
eth1 up with no ip
eth2 up with no ip