Add my dittos to those singing your praise here Don. You have helped me
many times over some rough spots!
Merry Christmas everyone!
Tom K2TA
- Original Message -
From: Don Wilhelm [EMAIL PROTECTED]
To: [EMAIL PROTECTED] Qth. Net [EMAIL PROTECTED]; Elecraft reflector
To Don and all who resond to help one another;
This is what Ham Radio is all about and brings me a smile and keeps me
coming back for more after enjoying this wonderful hobby for 31 years.
May everone have a wonderful holiday season with family and friends.
CUL 73's
K9NX
Jonesy
My K2 will usually go down to 100mW, but it's a borderline power level and
pretty touchy. When I go into the TUNE position, it will sometimes indicate
not enough power to make an SWR measurement. I've found it more reliable
and accurate to set it at 1W, and use a 10dB pad on the output. If
Bill,
The K2 will go down to 0.1 watts, and there is a mod that will allow the
power control circuits to increast that by a factor of 10, so it will
control down to 0.01 watts - see
http://www.madisoncounty.net/~kj5tf/K2mWmod.htm for the details, but if you
are driving an amplifier with it, note
Hello all,
To date here are the logs I have for PB Xmas Certificates:
* WA3WSJ
* NK8Q
* KM0Y
* W9HZC
* WA8REI
K3WW
K3VV
*Polar Bear
I plan to start printing the Xmas certificates soon so if you want one,
send in your log to WA3WSJ.
72/73,
Ed, WA3WSJ
Polar Bear #2
Seasons greetings everyone!
I'm still having some trouble getting 10Meters working on my K1. For
what it's worth, I did find a relatively inexpensive 36MHz
(fundamental) crystal without having to custom-order one. The only
catch is it's a surface-mount part. I just soldered some leads
Great Idea Indy. Let us know if wayne or eric is open to this.
73s
john-n3drk
- Original Message -
From: Indy [EMAIL PROTECTED]
To: elecraft@mailman.qth.net
Sent: Sunday, December 25, 2005 2:25 PM
Subject: [Elecraft] K2 registry...
Wonder if Elecraft has considered a rig Registry
Wonder if Elecraft has considered a rig Registry page on their site.
http://www.zerobeat.net/qrp/k2data.html
Craig
NZ0R
K1 #1966
K2/100 #4941
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Good idea. Would someone with the talent and means to do so care to set up
such a site?? It wouldn't necessarily have to be part of the Elecraft site.
And it could include all Elecraft rigs, not just K2
Bill K3UJ
K2 #3810
Wonder if Elecraft has considered a rig Registry page on
Wonder if Elecraft has considered a rig Registry page on their site.
Thom LaCosta, k3hrn, has already done so, look at his web site :
http://www.zerobeat.net/
Rich k2cpe
K2 #1102
Wonder if Elecraft has considered a rig Registry page on their site.
THIS MESSAGE IS FOR THOSE OF YOU CONTEMPLATING BUILDING YOUR NEW K2 PER
THE SUGGESTION ON OUR UNPCBS WEBSITE FOR CREATING A REWORK-FREE PLUG
PLAY READY STANDARD/BARE K2. FURTHER, IT IS ONLY FOR THOSE OF YOU WHO
HAVEN'T YET ORDERED THE NECESSARY DUPLICATE REPLACEMENT K2 PARTS.
Hi All and all the best for Christmas
I Have just completed the build of my new K1 (Christmas present to myself)
but I have a problem,
I have a 4 band module that I now works fine in another K1 I have tried it
in so im sure that there is no problem with that
It passed all the tests fine on
Saturday the 24th the mail carrier left a note in the mailbox that the
tried to deliver a box from the UK. The Kent II is here! Funny thing
is my XYL was watching out the window as the mail carrier drove up to
the box, filled out the notice and put it in. They made NO attempt to
actually get
Hi Gary,
A tip passed on to me when I was having the same problems with some very
small inductor cores in a commercial 2 way was to place a small amount of
petroleum jelly on the thread topside of the core and carefully warm it with a
heat
gun or hair dryer before attempting to shift it.
Good Evening Folks,
I hope your Christmas has been pleasant and safe. Sam and I had fun
getting our chores done. He sleeps and eats, I do the work. I think he
likes it that way :) Elk back strap steak for dinner was a good break
between the nets. It rained most of today after starting
Gary Hvizdak wrote:
THIS MESSAGE IS FOR THOSE OF YOU CONTEMPLATING BUILDING YOUR NEW K2 PER
THE SUGGESTION ON OUR UNPCBS WEBSITE FOR CREATING A REWORK-FREE PLUG
PLAY READY STANDARD/BARE K2. FURTHER, IT IS ONLY FOR THOSE OF YOU WHO
HAVEN'T YET ORDERED THE NECESSARY DUPLICATE REPLACEMENT K2
16 matches
Mail list logo