Version 4 of MLDX is still available and runs on Tiger, but as you say, is not
being improved.
I use MLDX v5 on Snow Leopard.
73 de M0XDF, K3 #174, P3 #108, KX3 #???
--
When work is a pleasure, life is a joy! When work is a duty, life is
slavery. -Maxim Gorky, author (1868-1936)
On 30 Sep 2011,
does RUMLog support microHAM (specifically microKeyer mk1) ?
73 de M0XDF
--
If you're sending someone some Styrofoam, what do you pack it in?
On 30 Sep 2011, at 03:18, Rick Prather wrote:
In my opinion MacLoggerDx is not the best if you are a DX'er. Especially if
you are a K3 user.
Yes they do!!!
SKU: 39196 is the item. Price is around $25. Looks like we got us a winner!!
Thanks!
73
Rich Arland, K7SZ
Bent Dipole Ranch, Dacula, GA
Cogito Ergo CQ (I think therefore I HAM)
Author: The ARRL's Low Power Communications, the Art and Science of QRP (all
3 editions)
Editor:
With the 2 meter option installed and 70cm transverter connected, Is it
possible to configure the K3 for cross band repeat?
No. The K3 is not capable of full duplex operation (transmit while
receiving) like this (at this time). Wayne indicated (long) ago that it may
be technically feasible at a
Oops.
This is not a distress sale, however, the K3 price is reduced to $2500 ono
shipped conus.
A respondent took me to task; on review, I realized I had priced the
for-sale K3 from the (current) price sheet for another one of my keeper K3s,
which has more add-ons, by mistake. I update the
Dear friends,
I would like to sell or change the Icom Ic-756pro3 for the price of the Kit
KPA-500 if anyone has interest in PRO3 can contact me directly via email.
Otherwise PRO3 is a new import is U.S.A. yet he is protective sticker on the
display only tested to work properly an interesting
Yet another canard to correct: the K3 kit ain't your father's hot water one
oh one kit grin; there's no soldering involved in the construction
process.
Brgds,
Dave, N3HE
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Sell-or-trade-tp6844000p6847677.html
Sent from the
This is true of the hardware blanker in the K3.
The DSP blanker works on a different principle, in part
because the noise pulse has potentially been stretched
by the selectivity of the roofing filter.
In the DSP blanker, for the duration of the noise pulse, a
locally generated signal is
Harbor Freight has several sizes of them. GL and VY 73, Lance
On 9/30/2011 4:50 AM, David Christ wrote:
Maybe something along the lines of the Ape Case? Anyway there are a
number of cases like ypu mention at Amazon. Ape is only one. Don't
know if there are any sizes that will fit your
My apologies for a bit of divergence.
This concerns implementation of LP PAN and LP Bridge with PSDR for the K3.
Old hat perhaps, now that the P3 product exists.
In my case, living in Canada, I was not really willing to consider a P3 at this
time, with respect, as an Elecraft product.
We have
On Fri, Sep 30, 2011 at 9:34 AM, Brian Pepperdine
brianpepperd...@sympatico.ca wrote:
implementation of LP PAN and LP Bridge with PSDR for the
K3http://www.qsl.net/donate.html
=
Brian is right, it can be a little frustrating to get LP-Pan going with the
K3. However, when
Yes, RUMLog supports microHAM keyer interfaces. DL2RUM has modified
Chen (W7AY's) uH Router and uses it with microHAM Keyer interfaces.
He also uses Chen's cocoModem for digital operation.
73,
... Joe, W4TV
On 9/30/2011 4:02 AM, David Ferrington, M0XDF wrote:
does RUMLog support
Thanks Joe, very interesting, I'll give it a try
--
A teacher is one who makes himself progressively unnecessary. -Thomas Carruthers
On 30 Sep 2011, at 16:12, Joe Subich, W4TV wrote:
Yes, RUMLog supports microHAM keyer interfaces. DL2RUM has modified
Chen (W7AY's) uH Router and uses it
I made an attempt to plot the noise blanker performance and log the results
in an Excel spread sheet. I found that the test was in valid so I used a
different approach.
The test involves using a function generator that's built into my Agilent
DSOX3024. The generator is set for pulse mode with a
Jack,
With a hope to be helpful by providing peer review on the experiment that
you are trying to do, I offer two quick observations. One is no mention of
the input amplitude of the noise pulses, and particularly varying their
amplitude. Second thought is that having a real signal to which you
I made an attempt to plot the noise blanker performance and log the results
in an Excel spread sheet. I found that the test was in valid so I used a
different approach.
The test involves using a function generator that's built into my Agilent
DSOX3024. The generator is set for pulse mode with
I made an attempt to plot the noise blanker performance and log the results
in an Excel spread sheet. I found that the test was invalid so I used a
different approach.
The test involves using a function generator that's built into my Agilent
DSOX3024. The generator is set for pulse mode with
Hi, Jack,
The test involves using a function generator that's built into my
Agilent DSOX3024.
Ah, excellent choice. :^)
The generator is set for pulse mode with a 200mv P-P pulse
repeating 15.5 every 15ms.
I don't know what this means.
I determined that without the DSP or the I.F.
No.
73, Eric WA6HHQ
---
www.elecraft.com
On 9/29/2011 7:10 PM, wa9fvp wrote:
With the 2 meter option installed and 70cm transverter connected, Is it
possible to configure the K3 for cross band repeat?
-
Jack WA9FVP
Willco Electronics
--
View this message in context:
Thanks to Don, Rick, and Johnny for the suggestions. I had the
opportunity to closely inspect the 80 meter antenna today after running
a dummy load at the antenna switch and found a carbon trace on an
insulator at the feed point. Mystery solved.
73, Bob K5SM
On 9/29/2011 7:50 PM, Don Wilhelm
I was going to work some digital modes today and was not getting any
waterfall information. the line out level configuration was at 10 as
suggested by Elecraft.
I plugged a set of stereo earphones into the line out jack and got no
sound at all.
Any suggestions about what to do next?
David
Where or how is the best/easiest way to get updated manual pages when
upgrading firmware. I just today upgraded to 4.39 from a 3.XX something or
other.de gary, kd9sv
__
Elecraft mailing list
Home:
The KPA Utility for Mac OSX and Unix can now be found at:
http://www.elecraft.com/KPA500/kpa500_software.htm#k3util
The XG3 Utility for Mac OSX and Unix can now be found at:
http://www.elecraft.com/XG3/xg3.htm#xg3util
73, Eric WA6HHQ
--
---
www.elecraft.com
Check the RF chokes in the Line Out circuit (KIO3: Audio I/O board).
I've seen the choke in the ground (return) circuit fail on a couple
occasions.
73,
... Joe, W4TV
On 9/30/2011 5:56 PM, David Christ wrote:
I was going to work some digital modes today and was not getting any
waterfall
Thank you for a refreshing point of view on dealing with the KPA500 hum.
--
View this message in context:
http://elecraft.365791.n2.nabble.com/use-the-fan-on-the-KPA-500-tp6840979p6849615.html
Sent from the Elecraft mailing list archive at Nabble.com.
While setting up the test I found a strange anomaly. If the pulse amplitude
went above 260mv, the overall noise floor increased. I’m not sure why this
happened but I suspect it has something to do with the DSP.
When the NB was engaged, the pulse noise was reduced but the overall noise
floor
Well, the car is all loaded up with K3, P3, XG3, KPA500, Owners programming
manuals, power supply, cables, PAC-12 antenna coax, Elecraft banner,
literature etc. David, KD0R is bringing his K2 and assorted mini-modules along
with an antenna for it.
I've done a prelim test on the KPA500 in
This macro is very useful; however, it can get you into a little trouble
with the UP UP Cops if you are in split mode when you access the macro and
forget to turn split off. The cure is to add the FT0 command to the end of
the string. This will take you out of split and does nothing if you are
Good luck Jim.
With a lot of Hams - especially the ones we called California Kilowatts*
(when I lived there), the KPA500 running wide open is definitely QRP. But at
least you're legal on all but the 30 meter band, Hi!
73,
Ron AC7AC
*Back in the 1950's and 60's a California Kilowatt was a
Between manual updates, the changes made by new firmware releases are
supposed to be included in the release notes supplied with the firmware.
These are not in the form of exact changes to the manual, since they are
written by the programmer and not the manual writer, but they should clearly
snip
Now Wayne, et al in the Elecraft labs, I need that KAT500 to complete the
station!!
Jim Sheldon - W0EB - Park City, KS
endsnip
Amen to that! Fred, AE6IC, K-Line
__
Elecraft mailing list
Home:
Gary,
At this url: [please note it is ftp and not http]
ftp://ftp.elecraft.com/K3/firmware/
you will find the file: hfwnotes.rtf
this file should be easily opened by any unix or windows machine...
dunno about Mac but I suspect so. At any rate, that file explains all
the fixes to the
32 matches
Mail list logo
