__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
Correct.
Refer to the K3 manual, page 56, KXV3: If KXV3 is set to TEST, the
K3 will use low power (0.1 to1.50 mw) on all bands, including hte HF
and transverter bands. RF input/output is via teh XVTR IN/OUT jacks
in this case. To access the TEST setting, KXV3 must first be set to
NOR,
Chargers for small electronic devices that use low frequency induction at
close range are common and harmless.
But how about a device that is said to use many transmitters to focus energy
at a rate of 1 Watt onto a device that is 30 ft away?
Harmless??
http://tinyurl.com/oopg7l3
peterc281 wrote
Thanks for the reply Bill. I remeasured the current. KRX3 on 1.82A off
1.52A so if the extra current is consistent with the KRX3 on and off with
your measurement then I've got an extra 400mA sneaking off somewhere?
I measured mine again and got the following using the internal
K2 SN4776, KSB2, K160RX, KAF2, KAT2, KDIMP, KBT2- $650 shipped
KX1 SN196, KXB30, KXAT1, KXPD1- $300 shipped
Original builder. My picnic table and backpack radios replaced by KX3.
Pictures available. Reply off list. Pickup in Southern CA preferred.
73
Joe
W6AYC
jpur...@verizon.net
I am currently using one of these in my K3's RX IN/OUT loop - works fine.
73, Pete N4ZR
Check out the Reverse Beacon Network at
http://reversebeacon.net,
blog at reversebeacon.blogspot.com.
For spots, please go to your favorite
ARC V6 or VE7CC DX cluster node.
On 9/11/2013 5:38 PM, Joe Subich,
What I found interesting was where the article said
A Cota-enabled device sends out a beacon signal that finds paths to the
charger, which in turn returns the power signal through only those open paths
back to the receiver, avoiding people or anything that absorbs its energy.
It sounds like
My first thought was phased array. When I found his patent, sure enough,
that is what he is doing.
http://www.google.com/patents/US8159364
David, AJ4TF
K2 7006
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Re-OT-Wireless-chargers-tp7578867p7578873.html
Sent from the
And, just a reminder, just because you get a patent on something doesn't mean
it can be made into a practical device that works. And it doesn't mean that
someone can't sue you for infringement even if it does work.
AJ4TF
--
View this message in context:
I have been reluctant to simply parallel the two by means of a Y
cable for fear that sending with the straight key would place a
direct short across the output of the winkeyer and wreak havoc on my
winkeyer. Am I being unduly concerned??
Yes, you are being overly concerned G.
The CW output
Have an order in for a Winkeyer USB, had a few hangs doing direct computer CW
with N1MM, so it was a question I was having. I usually do the straight key and
a paddle into the K3 keyer.
A related question, got a Signallink up and running last week. Unplugged the
foot switch on the PTT line
Ed,
The new firmware is 2.04r.
Download the installation instructions for the updated firmware and
review the notes on page 1 and page 4 to see if any will be beneficial
to you. You can download from
http://www.elecraft.com/manual/K2_Rev_2_FW_Rev_J.pdf.
73,
Don W3FPR
On 9/12/2013 2:40 PM,
That won't do what he claims which is to direct the signal *around* objects
like walls or people to reach the device, especially if it's in your
pocket.
I suspect he's a descendant of the entertaining guys who used to sell magic
elixir from the back of a wagon guaranteed to cure any ailment.
now that was funny
I could not find it either, did search on Elecraft site, no luck?
maybe it is for ESP
Emory WM3M
-Original Message-
From: Don Wilhelm
Sent: Thursday, September 12, 2013 4:04 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Disabling the ANT2
Stewart,
You are correct in that the SVGA keyboard interface maps to a US
keyboard.Unfortunately we did not have the room to include mappings
for all the international key maps. I think there are only a few keys
that are different on the UK keyboard. Let's see what happens when you
glad to see I wasn't the only one that couldn't find it..nor see the pun in it..
Harlan
Sent from my Verizon Wireless 4G LTE DROID
Don Wilhelm w3...@embarqmail.com wrote:
The KESP3 option is the latest in technology that allows the radio do
react to your thought waves :-) .
73,
Don W3FPR
Jorge,
I have connected a dummy load to the second antenna port. Thus when I
need a dummy load it is readily available and if I accidentally switch
to the second antenna port no harm is done.
73, Jim - W4BQP
Licensed since 1953
On 9/11/2013 7:45 PM, Jorge Diez - CX6VM wrote:
Hi Tom
Why? For
I don't know about you, but I keep my cell phone in my pocket. I don't really
like the idea of 1W of power being beam at my family jewels!
Sent from my iPhone
On 2013-09-12, at 12:34 PM, aj4tf aj...@arrl.net wrote:
And, just a reminder, just because you get a patent on something doesn't mean
What is the KESP3 option? I did not find it.
Are you referring to the KXV3 RXA mod? I have RXAMDKT installed.
On 9/12/2013 6:00 AM, elecraft-requ...@mailman.qth.net wrote:
3. Re: Disabling the ANT2 selection (Wayne Burdick)
__
Currently I manually switch between PC keying via a Microham Winkeyer
which keys via N1MM and a straight key by unplugging and re-plugging in
the back of the radio. I have been reluctant to simply parallel the two
by means of a Y cable for fear that sending with the straight key would
place a
Wayne got me, he is always so business, professional like, it did not occur
to me at first what it was.
I got good laugh when the the light in my dull brain when on.
-Original Message-
From: Harlan
Sent: Thursday, September 12, 2013 4:27 PM
To: d...@w3fpr.com
Cc:
The KESP3 option is the latest in technology that allows the radio do
react to your thought waves :-) .
73,
Don W3FPR
On 9/12/2013 3:52 PM, John Buck wrote:
What is the KESP3 option? I did not find it.
__
Elecraft mailing list
All,
I have one correction to make to last week's attendee list. John in TN is
WW4JF, not WW4JS.
My apologies for the error.
73,
-- Ian
Ian Kahn, KM4IK
Roswell, GA EM74ua
mailto:km4ik@gmail.com km4ik@gmail.com
K3 #281, P3 #688, KPA500 #1468
HRD v5.x/6.0 Test Team
Thanks for posting this Pete!
Are you noticing any observable decrease in signal strength with vs
without the hybrid splitter?
If I understand correctly a power splitter with 2 outputs will give 3db
insertion loss.
An RF amp may be added to make up the loss.
I'm wondering how you would describe
Probably unknown or forgotten was the NASA project to beam solar
power from orbit to earth! Yes, that was a real project (because I
worked on it). This was about 1972. Experiments were made using the
experimental station (DSS-13) at Goldstone Tracking Facility in the
Mojave Desert. I am
You might have to concentrate harder. ;-)
Rick wa6nhc
Tiny iPhone 5 keypad, typos are inevitable
On Sep 12, 2013, at 1:10 PM, WM3M w...@live.com wrote:
now that was funny
I could not find it either, did search on Elecraft site, no luck?
maybe it is for ESP
Emory WM3M
Ken and I are now accepting orders towards our fifth batch of 700 Hz INRAD
filters which is scheduled to ship in early November. Coincidentally we
are now projecting that this next batch will sell out about the same date
it ships. (A subsequent batch can be expected about 15 weeks after that
Greetings all,
My fully-loaded K2 with serial 3600+ firmware is 2.03d, my question is other
than the CW mod, is there any technical reason I would want to spend the money
on the K2's latest firmware.I believe 2.04p?
As always, thanks for everyone's help!
73
Ed
If one does not recalibrate does the config file change with firmware
updates requiring re-saving or does it only have to be saved initially?
Bob
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Hi Duane,
I'll jump in with my 2 cents. I use the DXE-RSC-2 splitter from DX
Engineering for my Pixel RX loop. One leg goes to the KXV3A RX IN port for
the Main RX and the other leg goes to the AUX port for the SUB RX. I think
this is what the original poster was trying to accomplish. This would
I just made up a small box with 6 jacks on it, for 6 different keys,
keyers or whatever,
all that is needed are some cheap diodes to steer the keyer in use.
Diodes block
whatever is being done from going back down the line to another
device. Another
jack goes to a cable to the K3.
No
One of the engineers on the Juno project gave a talk at our club last night
about wanting to involve hams in the Juno fly by next month. Very interesting.
Thought some of you might find it interesting.
There are three links near the bottom left of the page for more information.
In addition,
A simple BNC T connector (IE wire-or) from the RX antenna to the KXV3A RX IN
and to the AUX IN of the SUB RX works fine. No amplification necessary. In
diversity RX, the Main RX switches to my TX vertical and the SUB RX swicthes to
the RX Antenna - loop, beverage etc. I had first tried a
Recently seen on an Elecraft e-list post:
Tiny iPhone 5 keypad, typos are inevitable
Incorrect. Typos are entirely evitable... It's a telephone. use a real
keyboard. ;-)
73,
Bruce N1RXX
__
Elecraft mailing list
Home:
Bob,
I do a save configuration every time I update firmware. My inference is that
you can save your configuration every time you say save configuration.
73,
Barry
K3NDM
- Original Message -
From: Bob Baltz b...@hogbytes.com
To: elecraft@mailman.qth.net
Sent: Thursday, September
Typos or improper spelling or the incorrect words are always inevitable.
Proper grammar errors are yet more likely.
You're, your, yore; wear, where, we're, weir ...
Get over it. ;-)
Rick wa6nhc
Tiny iPhone 5 keypad, typos are inevitable
On Sep 12, 2013, at 7:10 PM, Bruce Beford
These don't rank even in the top 100 in terms of things that keep me up at
night.
It's pretty annoying when an email or text or IM contains *so much*
malformed spew that I have to struggle and re-read several times to
transform it into something I can understand, but if I can apply quick
mental
With the advent of messaging such as e-mail, conversation has moved from
the spoken to the written word, along with all of the mistakes one hears
daily in conversations.
I am careful when I write a formal letter. Here I'm talking and I often
notice, with a chuckle, how I sometimes mangle the
While I can be forgiving for most of those kind of errors, it saddens me
when I run across a communication from someone who is supposed to be
teaching my grandchildren filled with incorrect usage of the language,
including spelling errors, errors in sentence structure or syntax errors.
I have
-Original Message-
From: Don Wilhelm
Sent: Thursday, September 12, 2013 8:23 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] OT: signature lines
While I can be forgiving for most of those kind of errors, it saddens me
when I run across a communication from someone who is
Folks - Way OT. Let's end this thread for now.
Please try to keep posts here Ham Radio and Elecraft related.
73,
Eric
List Moderator
elecraft.com
_..._
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
42 matches
Mail list logo