RS-232 is not a multipoint protocol.
Dick
From: David Ahrendts [mailto:davidahren...@me.com]
Sent: Friday, January 02, 2015 4:03 PM
To: Dick Dievendorff
Cc: Elecraft Reflector
Subject: Re: [Elecraft] KX3+KXPA100+PX3 = Outta Inputs/Outputs
Dick, interesting. I wonder if anyone has
Hi Jim
May I ask you about your system for mixing rx antennas? How do you arrange
the double mixing? I have this in mind and I already have a 1026 and could
buy a NCC-1. I have a selection of HF aerials going up which I can use for
rx on 160, possibly even in diversity mode with the K3. We
I have the Timewave, the NCC-1, a MFJ-1026 noise canceller, beverages and
commercial mag loops, and my comments are:
1. I find the Timewave Noise reduction is of little value, the K3 NR is
superior
2. The Timewave has an EXCELLENT audio amplifier and completely removes the
hash from the K3
Yes, it works very well, especially with the KXAT100 equipped. If your K2/10
doesn’t already have a key out line, you may need to add one, eg.
http://www.mwrs.org.au/2014/04/20/elecraft-k2-amplifier-keying-circuit/
http://www.mwrs.org.au/2014/04/20/elecraft-k2-amplifier-keying-circuit/
73,
Have to second that Jim, I also had one I tried to use with a Omni 6
plus and it was zero
help at all, I tried the speaker mounted version 59 something for the
FT-1000D and it
also was useless, for me at least, sold both and sure have not missed
them.
73 Merv K9FD/KH6
On Fri,1/2/2015
Will a KXPA100 work with a K2/10? I'm looking for a
more-than-10W-capability for a possible county expedition in the 7QP,
and maybe elsewhere. I sold my KPA100 [in the lid] amp because I got
tired of switching between the 100W lid and QRP lid [and turned a trace
into a fuse when I cross
On Fri,1/2/2015 3:03 AM, G4GNX wrote:
I’ve been recommended to buy a Timewave DSP-599zx DSP filter by someone who
does not own a K3.
I had one that I tried to use with a Ten Tec Omni V. I found it next to
useless. Yes, it does narrowband audio filters, but they're no better
than what's in
Kxpa100 not only works with kx3 but also other non-elecraft radios, hence no
problem with k2. If u don't need 100w, Hardrock hr50+internal atu will be a
good choice at much lower price.
發自 Yahoo 電子信箱 Android 版
__
Elecraft mailing list
For those with the NCC1, how has it been on 20M as that is my worst band
(assuming it is 1 type of noise)?
It was my local noise that caused me to build my entire remote base.
However, the addition of such may help me with using my home station at
times.
Mike va3mw
We use a NCC1 here also, although with just a low 75 and 40 meter trap
dipole for the noise pickup antenna. It is very successful in
eliminating noise from the neighbor's plasma TV, and other noise sources
that originate in our neighborhood from time to time. It only works on
one noise at a
Hi all,
Below are the release notes for KX3 rev. 2.32 field-test firmware. If you're
interested in testing any of these changes to the firmware, please email me
directly. I'll take the first 20 or so. If all goes well, the new code will be
available as a beta release next week.
73 Happy New
Tom,
Unfortunately, your link doesn’t work. Opens to a blank screen.
73,
Bob - N7RJN
n7...@nobis.net
On Jan 2, 2015, at 07:33, Tom tom...@videotron.ca wrote:
Hi,
I had a serious noise issue from some neighbors lights. I bought an NCC1
from DXEngineering and an active noise
Thanks Rich
your advice was perfect
also found the link I was looking for
http://www.n3me.net/pdf%20files/N1MM%20-%20Elecraft%20K3%20Setup%20Notes.pdf
David Moes
President: Peterborough Amateur Radio Club.
dm...@nexicom.net
VE3DVY, VE3SD
On 1/1/2015 22:02, Richard Ferch wrote:
Re mode
Not with Mac?
On 1/2/15, 7:12 AM, 'Tom Blahovici' tom...@videotron.ca wrote:
Hi Tony
The avermedia card is a vga capture board. It captures the signal from
the svga card and then displays it in a standard windows window. You can
resize it like any other window and display it simultaneously
Hi,
I had a serious noise issue from some neighbors lights. I bought an NCC1
from DXEngineering and an active noise antenna from them as well. It can
get rid of noise almost completely.
Here is a video of WWV with it on and off.
http://va2fsq.com/wp-content/uploads/2013-Jan-15-20-43-43.avi
A
Hi Tony
The avermedia card is a vga capture board. It captures the signal from the svga
card and then displays it in a standard windows window. You can resize it like
any other window and display it simultaneously with all the other windows on
your Windows PC. So you do not need a separate
Since your amplifier is rated only to SWR = 1.5 maybe that is the issue. What's
the fault indicator telling you?
Wes N7WS
On 1/2/2015 9:10 AM, Tom Whiteside wrote:
I've had my K3 for 8 years now and just love it... My only complaint is
that in SSB I have trouble throttling the power back
I've had my K3 for 8 years now and just love it... My only complaint is
that in SSB I have trouble throttling the power back enough to not
occasionally trip an Alpha 87A. The K3 just ignores the reins and charges
ahead... I notice this on a 40M sked where my antenna is close to 2:1 SWR
- It
I have local noise problems which come and go depending on time of
day, day of week etc. I didn't like the idea of having a noise
cancelling device in the high power transmit path, so picked up a DX
Engineering NCC-1 which is perfect for use with my K3, inserted between
the antenna OUT and
I'm using a Gearmo 4-port USB to Serial adapter
(http://www.amazon.com/GearMo%C2%AE-36inch-Windows-Certified-Drivers/dp/B004ETDC8K/ref=sr_1_1?ie=UTF8qid=1420241893sr=8-1keywords=gearmo+4-port+usb+to+serial+adapter)
And I've also acquired an 8-port Edgeport from an eBay vendor.
I use a number of
I agree 100% about the effectiveness of the NCC-1. I've been using one for
about 3 years, and it is a very well-designed and well-built product. When
coupled with a noise sense antenna that can receive the offending noise at
close to the same level as your primary antenna (give or take 10dB or
Thanks Gil. I have plentiful Mac USB physical ports (about 8). So the issue is
with the KX3. Got no place to plug it in. :—(
On Jan 2, 2015, at 3:25 PM, Richard Gillingham w...@hotmail.com wrote:
Sounds like you need a virtual serial port emulator program.
73
Gil, W1RG
Sent via the
Sounds like you need a virtual serial port emulator program.
73
Gil, W1RG
Sent via the Samsung Galaxy Note® 3, an ATT 4G LTE smartphone
div Original message /divdivFrom: David Ahrendts
davidahren...@me.com /divdivDate:01/02/2015 6:14 PM (GMT-05:00)
/divdivTo: Elecraft List
Hi Tom,
Since it behaves into a dummy load it's probably the SWR but you could also
take a closer look at the TX gain calibration. Even after running the
calibration routine I have had to touch up the numbers on a couple of bands.
Take a look at the K3 manual page 62 for TXGN{pwr}. The last
Got the KX3 Line. KAT500 and W2 also. Love ‘em. Now, I appear to be out of
inputs and outputs with little lines running between the boxes and all of the
inputs/outputs in use. What do you do to get a KXUSB into the KX3 for radio
control from a variety of software programs into an ACC1 PC port?
I would like to use CW SKIMMER with my K3/P3.
Is there any special needs required?
RC KC5WA
--
another day in paradise CQ CQCQ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Howdy Gang:
I have a like new KFL1-2 40/20M fully builtboard for the K1.
Will ship for $50.
Happy New Year to all.
73, Joe W2KJ
I QRP, therefore I am
__
Elecraft mailing list
Home:
I agree with Eric. You need to solve this on the rf side.
You can using a loop receiving antenna and null out the source. Or, something
like an ANC4.
Mike va3mw
On Jan 2, 2015, at 6:33 AM, Eric Buggee ericvk...@esc.net.au wrote:
Hi Alan,
The DSP599zx may well reduce the
Hi Alan,
The DSP599zx may well reduce the baseband (audio) noise as
demodulated; BUT it will do nothing about the ambient RF pollution on
40m and lower bands.
As you rightly conclude in your last paragraph no amount of audio
processing is going to remove the noise as received
Tom,
If you can resize the video using this card, how do you add additional windows
to the screen?
Tnx
N2TK, Tony
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Tom
Blahovici
Sent: Thursday, January 01, 2015 4:15 PM
To: Harry Yingst via Elecraft
Hi all.
I have really bad noise floor issues at my home QTH in the UK, especially on 40
metres and below. Some of the issues may be cured as the neighbors’ Christmas
lights are packed away for the year.
I’ve been recommended to buy a Timewave DSP-599zx DSP filter by someone who
does not own a
Hi all, Happy New Year 2015!
In version 2.27, when you turn on the NR or NB of KX3, will not move the
main dial.
Is this a specification, or bug of v2.27?
---
JE0LFI / Nakamura
--
View this message in context:
http://elecraft.365791.n2.nabble.com/KX3-MCU-2-27-BUG-NB-NR-mode-tp7596662.html
32 matches
Mail list logo
