You need to visit the N1MM reflector.
Is there a command to set Mic gain to zero?
You probably have a corrupt file.
Mike W0MU
On 3/20/2015 8:11 PM, Ross Primrose wrote:
N1MM or N1MM+? I'm not seeing that with my K3 with N1MM+.
73, Ross N4RP
On 3/20/2015 8:58 PM, Jerry wrote:
Evening all,
Hello Group,
I am looking for a KNB2 noise blanker for an aged K2 in the used market.
Shipping is easy by using padded envelope. If you have one for sale, please
contact me off-the-list vr2xmc at yahoo dot com dot hk
73
Johnny VR2XMC
Hi,
The AutoNotch on the K3 is too effective! It’s learning rate is too rapid, and
that causes it to lock on and off of rapidly varying voice peaks during SSB
phone reception. The effect sounds much like someone overdriving their mic
input at the transmitter.
Last night I was listening in head
Eric,
Thank you. It looks fine. Consider it published.
73,
Phil, NS7P
> On Mar 20, 2015, at 1:13 PM, Eric Lanzl wrote:
>
> Hello Phil,
>
> I hope you are doing well. I learned last Sunday that you were in the
> hospital. My very best wishes for a fast recovery.
> I wanted to let you know t
Phil, I can cover for you Sunday. Please let me know if the gig is mine or
if someone beat me to the punch.
Speedy recovery!
73 de,
--Ian
Ian Kahn, KM4IK
Roswell, GA EM74ua
km4ik@gmail.com
Please join me in the Georgia QSO Party April 11-12, 2015. Info at
http://www.georgiaqsoparty.org.
10
N1MM or N1MM+? I'm not seeing that with my K3 with N1MM+.
73, Ross N4RP
On 3/20/2015 8:58 PM, Jerry wrote:
Evening all,
I was setting up N1MM with the K3 for the Virginia QSO party tomorrow when I
noticed the following strange behavior.
Whenever I press any of the FKeys on N1mm (with the ex
Hey All,
So, I have this situation...
I want to do RUDX tomorrow and trying to get things set up on the
remote.
For some reason, my key-over-dtr not working at the moment (may be a loose
cable at the remote, but won't get there until after contest.)
So, I can control the rig fine from N1MM at t
Jerry,
Does the K3 respond normally when operated from the buttons and knobs?
If so, the problem lies with the software that you are using - in this
case, N1MM - unless there is a bug in the K3 command structure, and
AFAIK there have been no recent changes.
73,
Don W3FPR
On 3/20/2015 9:00 PM
Evening all,
I was setting up N1MM with the K3 for the Virginia QSO party tomorrow when I
noticed the following strange behavior.
Whenever I press any of the FKeys on N1mm (with the exception of F4 and
F12), the mic gain on the K3 gets set to 1. I cannot remember this was
always this way or som
Evening all,
I was setting up N1MM with the K3 for the Virginia QSO party tomorrow when I
noticed the following strange behavior.
Whenever I press any of the FKeys on N1mm (with the exception of F4 and
F12), the mic gain on the K3 gets set to 1. I cannot remember this was
always this way or somet
Grant,
The AM audio bandwidth is limited by the DSP - both for transmit and
receive. I don't recall the exact audio bandwidth limit, but it is 4kHz
or lower.
73,
Don W3FPR
On 3/19/2015 10:24 PM, GRANT YOUNGMAN wrote:
If the FM filter is assigned to AM transmit, is there any improvement in
I believe it is constrained to the normal SSB bandwidth of around 3 KHz
or less, unless using ESSB mode. However, I'm certainly not the expert
here.
For US hams, 47CFR97.307 begins:
"(a) No amateur station transmission shall occupy more bandwidth than
necessary for the information rate and e
It's that time of the year again. I am once again acting as counselor for a
small group of Scouts from the tri-state area (KY/OH/IN) who are working
towards their Radio merit badge. They will be looking to make their first QSO
tomorrow (Saturday) morning, using the club station of Dixie Heights
This actually should work. The #INHIBIT signal will disable transmission rather
quickly, at least as fast as the key line.
The catch is that most tuners don’t detect high SWR and output their tune
signal all that fast. In fact most use a relay,
adding 7-10 mSec of time to the overall time. You wi
On Fri,3/20/2015 6:14 AM, j-meis...@comcast.net wrote:
I realize that one normally interrupts the amp via the key line, but it seems a
little more straightforward
in my particular case to do it via the inhibit line.
I think you're doing it the hard way, Jim. The KPA500 senses RF very
quickly,
That is the right cable. You can use it between the K3 and KPA, the KPA and KAT
or the KAT and K3. Remember, the correct cable configuration for using all three
together is the AUX cable from the K3 to the KAT500, then another from the
KAT500 to the KPA500.
Enjoy your K-Line!
- Jack Brindle, W6FB
FYI: I just redid my computer system. Went from 5 desktops to 3 & from 3
20" monitors to 1 34" monitor. All the chassis are mounted away from the
operating position and I use remote desktop to access them. They run a
variety of tasks.
The main is a win8 dell with lots of HP. The other 2 are de
Phil,
Now that we're on daylight saving time, I might be able to cover for you.
Let me check after the wife gets home, and I'll follow up with you tonight.
I'm glad you're recuperating and hope you're back able to take back the mic
soon.
73 de,
--Ian
Ian Kahn, KM4IK
Roswell, GA EM74ua
km4ik...
I received some cables with a recent K3 purchase that I have a question
about. They appear to be part of a cable package listed on the Elecraft
site, but I'm not 100% certain. What I have consists of a Male/Female 6 ft.
15 pin cable, a "Y" 15 pin cable, a "Y" rca cable and the TX interrupt 15
pin
Thanks for all of the good wishes and thoughts about me. I am home from the
hospital, but I am not up to the NCS duties yet. So, we need someone to step
up this week and fill in for me. The net is at 1800Z on Sunday on 14.3035 MHz.
Who can pick it up? Thank you.
73,
Phil, NS7P
___
Mack:
I would suggest that before you contact Support you verify
that all of the TMP interconnect cables are snugly and
completely in place.
73, Ken K3IU
On 3/20/2015 9:30 AM, W4CCS wrote:
Mack:
I have not seen this problem.. Yes, I would contact tech support..
W4CC
Mack:
I have not seen this problem.. Yes, I would contact tech support..
W4CCS
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of mackmc
Sent: Friday, March 20, 2015 7:56 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] New K3 Synthesizer now req
Setup is Yaesu FTDX3000 xcvr --> Elecraft KPA500 amp --> LDG AT1000ProII tuner.
I am using a cable
between the FTDX3000 and KPA500 to transfer band data and the key line (KPA500
Aux Pin 10). I would
like to use the open-collector interface on the AT1000 (which is pulled low
during tuning) to p
I installed the new synthesizer and for the past couple of days my K3
requires me to cycle the power button about a dozen times to get signals.
The K3 boots normally and there isn't an error displayed but there are no
signals present on the radio. I'm running the latest firmware: MCU 5.14 /
DSP 2.8
Yes, but not without another device. APRS is implemented as a severe subset of
the packet protocol. (Unnumbered Data Packets) you could use a full Terminal
Node Controller (TNC) or you could use a simplified interface which implements
ONLY APRS. These are usually refered to as trackers or some
25 matches
Mail list logo