Re: [Elecraft] ID'ing small 4 pin male connector on the bottom of the KX3

CW Paddles. KX3PD. Sent from my iPhone ...nr4c. bill > On May 11, 2016, at 7:58 AM, Jim Rodenkirch wrote: > > OK - what is that 4 pin thingy for? > > > > -- > View this message in context: >

Re: [Elecraft] K1 - problem with KAT1

Ray, I would be highly suspicious of a relay that is not working properly. Whether that is the result of a poorly or unsoldered connection or because the relay is really bad is to be determined. That relay just was not operated on the other bands, but it happened to try to be operated on 15

Re: [Elecraft] Bonito RadioCom 6

To add to Don's list for Mac users, RUMlogNG, by DL2RUM is a logging program. The main logger is oriented toward DXers, but there is a contest logging sub-program. It has integration with flgidi, and can bring the K3 internal PSK/RTTY decode/encode to the computer screen. It is available free

Re: [Elecraft] Interesting FW Upload issue with K3 (happy ending)

Hi Dick, Yeah, I'm willing to buy the intermittent comm issue -- I do use the Elecraft USB cable that came with my K3 #6171. I found it interesting that the other updates went just fine, while even the second attempt to update the FPF had a single retry (all other updates had to be installed

Re: [Elecraft] Interesting FW Upload issue with K3 (happy ending)

This could be an intermittent communication problem. I'd look first at the serial port and USB to Serial adapter (if there is one). When the part wears out, my experience is that it continues to fail at the same address. My K3 S/N 00018 has had more firmware installs than anyone's with the

[Elecraft] Interesting FW Upload issue with K3 (happy ending)

Hi: I am curious if this is an indication of a programmable part wear out, or perhaps simply a timing issue between my K3 and computer. I was installing the 5.38 firmware update today in anticipation of installing the two new synthesizer hardware upgrades. The K3 utility found the latest

[Elecraft] K1 - problem with KAT1

I have just installed a KAT1 in a K1 with 4-bands filter board. The KAT1 bridge adjustment and power calibration were performed without difficulty. The K1 (serial number 25xx) has been used without any problems and the KAT1 has been used previously with a different 2-bands K1. Using Tune and

[Elecraft] New Product from QRPworks

Hi all, Just wanted to let you know that the new K-Board from QRPworks is now available. It's a smart keyboard interface for the K3 / K3S that is small and lightweight. It is used to create and send lots of messages and macros, with a wireless or wired USB keyboard. Plus more. The free

[Elecraft] New Product

Hi all, Just wanted to let you know that the new K-Board from QRPworks is now available. It's a smart keyboard interface for the KX3 that is small and lightweight. It is used to create and send lots of messages and macros, with a wireless or wired USB keyboard. Plus more. The free Message

[Elecraft] K3S and or P3 FS LOADED

Elecraft K3S/100 #10684; Three months old; In Like New Condition. During the build, treated every connector pin with Caig De-Oxit solution, to prevent pin Oxidation; intermittent connectors; easy connector insertion; and low contact resistance. KTCXO3-1 High Stability Reference Oscillator.

[Elecraft] K3(s) Full duplex with 2nd RX ?

This came up as a possibility a couple years ago. I was wondering with the k3s new RF board and synthesizers if there is a chance for full duplex operation with the 2nd RX. Would make for an interesting possibility of single radio "SO2R" operation Mark. N2QT

Re: [Elecraft] K3,P3,SPE 1.3kw amp and MicroHAM interface III

I have Microham Station Master driving K3/P3, with one wire + ground going to 2k-fa. Logger32 sees Station Master. 2k-fa changes bands and adjust antenna tuner by frequency. K3/P3 are running at default speed. Works well except that toroid is required for the cable to 2k-fa. Ignacy, NO9E

[Elecraft] P3 behaviour

I've changed monitors on my P3 and everything is going well except that for some reason when I tune across the bands, the monitor display moves very fast when turning the main VFO across the bands. I know I'm missing something, but Ive spent the last two days trying to find why this is happening

Re: [Elecraft] ID'ing small 4 pin male connector on the bottom of the KX3

That beez it, Ken...to all I have them answer and thanks to all that responded... From: Ken G Kopp Sent: Wednesday, May 11, 2016 7:24 AM To: James Rodenkirch JamesR; elecraft@mailman.qth.net Subject: Re: [Elecraft] ID'ing small 4 pin

Re: [Elecraft] ID'ing small 4 pin male connector on the bottom of the KX3

Are you asking about the connector for the keyer paddle assembly? 73 K0PP __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This

[Elecraft] K3/P3/Expert/microHAM

I have almost the same exact configuration as K9GEM except my microHAM box is a DigiKEYER 2. Couple comments: K3 port speed is 38.4k, not 48k This setup is not difficult but does take a couple Y adapters. I suggest that Gerald contact Dan at Expert Linears and have him build up a custom

[Elecraft] ID'ing small 4 pin male connector on the bottom of the KX3

OK - what is that 4 pin thingy for? -- View this message in context: http://elecraft.365791.n2.nabble.com/ID-ing-small-4-pin-male-connector-on-the-bottom-of-the-KX3-tp7617360.html Sent from the Elecraft mailing list archive at Nabble.com.