Re: [Elecraft] P3 Will it work on other Radios

It works in tracking mode, but not fixed-tune mode. It also does not show the receiver VFO frequency or the IF bandwidth. But you can change the span, reference level and scale, use the markers, turn on averaging, set function keys, etc. As long as the radio has a wide-band IF output in the

Re: [Elecraft] P3 Will it work on other Radios

It works in tracking mode, but not fixed-tune mode. It also does not show the receiver VFO frequency or the IF bandwidth. But you can change the span, reference level and scale, use the markers, turn on averaging, set function keys, etc. As long as the radio has a wide-band IF output in the

Re: [Elecraft] KX2 Battery Question

> On May 26, 2017, at 8:27 PM, Tim McDonough N9PUZ wrote: > > I have a "new to me" KX2 along with the internal battery and charger. Inside > the KX2 battery compartment, is there supposed to be any sort of insulating > sheet or pad covering the circuit board? Tim, No

Re: [Elecraft] P3 Will it work on other Radios

This is true, if the IF is in range. But there are some features that require communication between the radio and the P3. I think it may only work in tracking mode (not fixed mode). In any event, I would check this out in detail before buying one with the intention of using it with a radio

Re: [Elecraft] P3 Will it work on other Radios

If you have access to IF OUT. Sent from my iPhone ...nr4c. bill > On May 26, 2017, at 4:03 PM, Scott Russell wrote: > > Will the P3 work on other manufacturer radios? > > Thanks, Scott N1SER > __ > Elecraft

[Elecraft] KX2 Battery Question

I have a "new to me" KX2 along with the internal battery and charger. Inside the KX2 battery compartment, is there supposed to be any sort of insulating sheet or pad covering the circuit board? There was nothing inside mine when I opened it and my first thought is that even though it is

[Elecraft] Remote operation of K3s from Android phone?

A friend is investigating operation remotely and wonders if it is possible from a Samsung phone. He's strictly an SSB op. He's OK with operating thru a PC at the shack end as he never turns either the PC or rig off. Ideas? 73 jim ab3cv

[Elecraft] KX3 Deviation

I plan on setting my KX3 with 2 meter module up for packet and wondered if anyone had measured the deviation at the standard 4 bars with the 5 flickering in FM mode? John K7JLT __ Elecraft mailing list Home:

Re: [Elecraft] P3 Will it work on other Radios

Yes. I believe the range for i's input is between 450 kHz and 21 MHz, so it'll work with our boatanchor radios that use a 455 kHz or 10.7 MHz IF. 73 Charlie k3ICH -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Scott Russell Sent: Friday, May

[Elecraft] New KX2 CW/DATA logging feature ready for test

Hi all, The KX2 logging feature we mentioned last week is now ready to be field tested. If you occasionally use CW/PSK-D/FSK-D modes on your KX2 in situations where logging is inconvenient or impossible, such as when operating hand held from a narrow ledge thousands of feet above a river

[Elecraft] P3 Will it work on other Radios

Will the P3 work on other manufacturer radios? Thanks, Scott N1SER __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list

[Elecraft] Mouse and P3 SVGA

Yes, the mouse interaction would be a nice addition to the P3. I have enjoyed having the P3. It has been more than adequate for my operations and I like having the transmit monitor. Before I got the P3 I used the SDRPlay with a Minix Windows computer and a 7 inch monitor mounted into a speaker

Re: [Elecraft] [KX2] ATU - SWR Meter?

Set ATU MD (in the menu) to BYP (bypass). Read about it in the listing of menu items near the end of the manual. 73, Don W3FPR On 5/26/2017 2:09 PM, MaverickNH wrote: When I activate the ATU on the KX2, it flashes the initial SWR and then does it's tuning thing, flashing the final SWR. Is

[Elecraft] [KX2] ATU - SWR Meter?

When I activate the ATU on the KX2, it flashes the initial SWR and then does it's tuning thing, flashing the final SWR. Is there a way to just indicate the initial SWR without then tuning? I'm looking to adjust the antenna length quickly for low SWR before then engaging the ATU. Bret/N4SRN --

Re: [Elecraft] Mouse and P3 SVGA

I second that the small screen is more than adequate and the larger screen not necessary for operation. I like the bigger screen because it is useful when there are observers. I run the GOTA field day station and it is great for training a group. From: Dave Fugleberg

Re: [Elecraft] Mouse and P3 SVGA

I second that. Having tried a couple other panadapter solutions I found the P3 to be the most reliable with the least amount of hassle. The one shortcoming in my mind is using the tiny knob to QSY... Full mouse support would be welcome. I've found that the small screen works better than

Re: [Elecraft] Remove Me

The value of mail lists is the ability to share information. The curse is the tendency for things to grow out of control. I handle this by creating a rule in Outlook that automatically shunts my listserve messages to a separate folder. That way it is there if I want to look at it but is

[Elecraft] Remove Me

Actually half of the posts not even pertain to Elecraft products. I keep my subscription on vacation hold and just read the archives at my leisure. You can change your subscription status here: http://mailman.qth.net/mailman/listinfo/elecraft John KK9A From: Jose N2LRB Fri May 26 10:49:48 EDT

Re: [Elecraft] Mouse and P3 SVGA

I have tried other computer based panadapters and I now have the P3 with SVGA. I found that mediating through a computer using a sound card creates configuration issues and results in occasional operating headaches. By contrast, the P3 is specialized hardware and connection is more reliable and

Re: [Elecraft] Remove Me

Jose, ​Look at the bottom of this page. http://mailman.qth.net/mailman/listinfo/elecraft ​ On Fri, May 26, 2017 at 9:49 AM, wrote: > http://mailman.qth.net/mailman/listinfo/elecraft 73, Tom - KQ5S __ Elecraft

[Elecraft] Remove Me

Hi, Please remove me from the daily list. I will look at the web forum instead. I find that most of what is put on the e-mail listing does not pertain to me or my situation. Jose N2LRB __ Elecraft mailing list Home:

Re: [Elecraft] Mouse and P3 SVGA

> Do you suppose we will ever be able to use the mouse with the P3 and SVGA (first requested August 2009 and once every few months ever since) The P3/PX3 already supports USB HID (Human Interface Device). The firmware currently receives and ignores mouse reports. Note: The K-Pod is

Re: [Elecraft] [KX3] New behavior using JT65

Brian, As I told the original poster, I suspect a bad audio cable that is picking up noise and continuing to activate the VOX. He had both VOX and PTT active, and I don't know if that has anything to do with it. I don't think it is a KX3 problem. 73, Don W3FPR On 5/26/2017 9:59 AM, Brian

Re: [Elecraft] [KX3] New behavior using JT65

That's weird. I have not experienced an intermittent VOX. Mind you, I run with VOX on all the time and have at least a hundred hours in this mode and VOX setting. Very stable. What firmware level are you at? regards, Brian VE3IBW On Thu, May 25, 2017 at 8:16 PM, Leo Aniol

Re: [Elecraft] K3 users with SteppIR interface

Hi Larry, Don't worry, you're not breaking any new ground. You will need a few items. You'll need a Y cable and an S-13 cable from SteppIR or you can make your own. You may also need a 9 pin extension cable depending on how close together all of your components reside. The SteppIR controller

Re: [Elecraft] Mouse and P3 SVGA

look at it http://www.elecraft.com/P3/p3.htm then decide if its what you are looking for. If not, you can try other options 73, Jorge CX6VM/CW5W 2017-05-26 9:25 GMT-03:00 John K9UWA : > If the P3 with SVGA had the Point and Shoot selectable VFO's I would >

Re: [Elecraft] Mouse and P3 SVGA

same -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of John K9UWA Sent: Friday, May 26, 2017 8:26 AM To: elecraft@mailman.qth.net Subject: Re: [Elecraft] Mouse and P3 SVGA If the P3 with SVGA had the Point and Shoot selectable VFO's I would purchase

Re: [Elecraft] Mouse and P3 SVGA

If the P3 with SVGA had the Point and Shoot selectable VFO's I would purchase a P3. John k9uwa >> Do you suppose we will ever be able to use the mouse with the P3 and SVGA >> monitor like the Flex people do? That would sure be nice. 73