Well, thanks to the burners, most of Gerlach has cell coverage, free wifi, 2m
and 440M repeaters - linked to IRLP, and they have even installed their own
cell tower out near the Trego Hot Springs for cell coverage out in the Black
Rock. It's funny to zip by the hot springs on a 70MPH
Thanks to Dick for the detailed explanation of the tuner. I didn't know
about the 8 Kc resolution limitation of the tuner. Even with plus or
minus 8 Kc I should still be with a segment or two of the actual
frequency, so I should be lower than 1.5:1 SWR. Thanks everyone.
Charles K5UA
Use K3 Utility. Under Configuration tab.
Sent from my iPhone
...nr4c. bill
> On Dec 11, 2019, at 8:37 PM, WIN KS4AA wrote:
>
> I haven't seen any instructions on how to change the startup message. I just
> bought a used K3/0 and would like to change the call to mine. HELP.
> Eddie KS4AA
It's in the utility software.
73,
Scott N9AA
On 12/11/19 8:34 PM, WIN KS4AA wrote:
I haven't seen any instructions on how to change the startup message.
I just bought a used K3/0 and would like to change the call to mine.
HELP.
Eddie KS4AA (1st post)
Use the K3 Utility ….
Grant NQ5T
> On Dec 11, 2019, at 8:34 PM, WIN KS4AA wrote:
>
> I haven't seen any instructions on how to change the startup message. I just
> bought a used K3/0 and would like to change the call to mine. HELP.
> Eddie KS4AA (1st post)
>
I haven't seen any instructions on how to change the startup message. I
just bought a used K3/0 and would like to change the call to mine. HELP.
Eddie KS4AA (1st post)
__
Elecraft mailing list
Home:
Here is the list of stations that checked in to the Net on Sunday 12-8. Again
thank you to the relay stations as the propagation was good then bad and good
again.
Also, a question for the members of the net and others. We were wondering if
there might be an interest in having a 40 meter
Hi Al,
You almost gave me a heart attack this morning. When I first started reading
your email below I mistakenly thought you were referring to Elecraft as the
company you called.
Fortunately my heart rate and blood pressure dropped back to normal by the time
I got to the end :-)
No need
A personal account
I did up front pay for a K4 based on the customer service, quality, and a
recommendation of N1MGO. This type of attention to detail and service is
unheard of these days
Ken. WB8PKK
Sent from Yahoo Mail on Android
On Wed, Dec 11, 2019 at 3:09 PM, Joseph Street wrote:
Hello,
I am a very very new KX3 and PX3 owner and have been using this as my portable
kit when I travel to NYC. I spend most of my life traveling in hotels, so I
can't say I have really reached out to the world yet, but it certainly makes
the stay a bit more fun. The KX3 and PX3 combo has
Impossible.
Growing up in Minnesota, it was customary to reveal - at an appropriate age -
not only the truth about Santa Claus (I won't go into that right now), but the
fact that there is, was, and forever will be only one (1) fruitcake in
existence.
It just gets passed around every year.
Mike,
I was surprised to find who I was speaking to, but I do agree with
you that it wouldn't be overly productive for Wayne. But, on the other
hand in his case, I suspect he doesn't sleep. With his having to do what
he does for Elecraft, I wonder how he has the time to play with the
Good luck on this request. No one else has a clue about this. The web site
still says “January 2020”. That could mean one out the door on Jan 31, 2020.
I ordered in mid May.
Sent from my iPhone
...nr4c. bill
> On Dec 11, 2019, at 12:26 PM, drus...@wbsnet.org wrote:
>
> In late August or
My own recent experience has been a good example. Am I an Elecraft customer?
Yes but the only thing I bought directly from the company was a T1 tuner which
is not a big ticket item. Actually with that I had a question during the build
I sent to tech support. I wanted to know about the
"If it were up to me, I would not allow the counter to have priority unless the
frequency difference is at least several bin's worth. That way, transmission
wouldn't be needlessly interrupted because of the low counter resolution, but
the amp would still be protected against erroneous data from
Does anyone know if the K4 panadapter will have a monochrome option for
the waterfall as the P3 does?
73,
Fred ["Skip"] K6DGW
Sparks NV DM09dn
Washoe County
__
Elecraft mailing list
Home:
Keep in mind, what you experienced does not scale in business.
Image if 50% of Elecraft’s customers wanted to call today and talk to Wayne or
Eric. That would not allow him to be working on the K4 or other new special
stuff.
This is why they all have staff. :)
Mike va3mw
> On Dec 11,
Mike,
Actually, that really hasn't been my experience except Elecraft and
Tentec which is no longer in business. I remember a call to Elecraft
around 2100L EST when I ran into trouble when building my K2. The tech
answered the phone and we spent about an hour trouble shooting a test
that
We discovered yesterday that the photo of the AX1 on eHam was so fuzzy that it
was unrecognizable as a material object, must less a whip antenna. That's been
fixed (https://www.eham.net/reviews/view-product?id=14042).
A review category for the AXE1 was also just added
Fortunately, there are a lot of Ham Radio companies that you can
actually reach out to to the developers and who are active hams.
It isn't limited to just this one.
Mike va3mw
On Wed, Dec 11, 2019 at 1:47 PM Fred Soop wrote:
>
> I didn't actually make a call but after meeting Elecraft at
One thing that may confuse things is that the frequency counter has only
8 kHz (?) resolution, and it takes priority over data from the radio.
I'm unsure about this, as my KPA1500 doesn't often seem to change ATU
setting when start transmitting. It is possible, though, that the low
resolution
I didn't actually make a call but after meeting Elecraft at Hamvention, my
reaction was similar. Did not actually meet the top brass but one of their
salespeople was able to tell me more about sorting out my antenna situation
than many others combined.
73
Fred AC9RQ
>>>
I just read the
Those are actually from the stanza:
"We never eat cookies, for cookies have yeast,
And one little bite turns a man to a beast,
Oh, can you imagine a greater disgrace,
Than a man in the gutter with crumbs on his face."
On Wed, Dec 11, 2019, 1:16 PM Kidder, George wrote:
> "The man who eats
"The man who eats fruitcake is a total disgrace,
Stretched out in the gutter with crumbs on his face
'Away Away with rum', by gum
Is the song of the Temperance Union."
George
On 12/11/2019 6:59 AM, Gwen Patton wrote:
> [This message came from an external source. If suspicious, report to
>
On 12/11/2019 8:08 AM, David Ferrington, M0XDF wrote:
Not true Jim, a XV144 & 432 + a modified XV50 (to 70) lets me use the K3
for those bands and it’s a darn site better than a number of other
commercial rigs on those bands.
Plus with limited shack space, it’s all in one rig.
But it's NOT
Yes I got caught with using reference to an older manual on this topic. my
oops
Bob, K4TAX
Sent from my iPhone
> On Dec 11, 2019, at 11:50 AM, char...@k5ua.com wrote:
>
> I should have checked for a new manual since the manual that came with my
> KPA-1500 has 20 Kc bins which I see are
I just read the newsletter too. Sounds like a great company to work for!
From: elecraft-boun...@mailman.qth.net on
behalf of Al Lorona
Sent: December 10, 2019 9:12 PM
To: Elecraft Reflector
Subject: [Elecraft] The Phone Call
I just read the Elecraft
For Sale: Elecraft K1-4 (SN01552). Radio has 4 bands (40/30/20/15). Also
includes the ATU, NB, manuals and power chord. The radio is in good
shape and 100 % working. Pictures available on request.
$425 shipped priority mail to US Only
Thanks Harry NK9R
I should have checked for a new manual since the manual that came with
my KPA-1500 has 20 Kc bins which I see are now 10 Kc bins. In addition,
the tuning frequencies have been changed to 10 Kc increments. I think
that is why I was getting unexplained results from the tuner as I tuned
across
In late August or September I placed and paid for a K4. Could you please
supply me with my shipping sequence number. I am anxious to see how it
stacks up against my IC 7851. BTW I love my KPA 1500 which is replacing
my Alpha 9500.
Gary Drussel K0BAJ
Not true Jim, a XV144 & 432 + a modified XV50 (to 70) lets me use the K3 for
those bands and it’s a darn site better than a number of other commercial rigs
on those bands.
Plus with limited shack space, it’s all in one rig.
73 de David, M0XDF (K3 #174, P3 #108)
--
Not all those that wander are
Hi Ted
It is very difficult to design an amp that does what you ask. Yes, my ACOM
wasn’t bad, but it still have some variance if I went from 160M to 6M.
Every amp I have owned has required different drive on each band. I have
worked that into my procedure that every time I change bands I
Maybe retune the amps input circuit??
Will the 5000 not set the per band output?
73s Bob W5RG
On Wednesday, December 11, 2019, 9:12:35 AM CST, Salvatore Ted K2QMF
wrote:
Hello All,
Received my new KPA1500 a few days ago!
I love the Amp but I have an issue maybe someone can help
Hello All,
Received my new KPA1500 a few days ago!
I love the Amp but I have an issue maybe someone can help with!!
The KPA1500 does NOT play well with other rigs!!
I am driving it with a Yaesu FTdx5000! There is a very big difference in drive
levels for different Bands!! For instance on 160 the
Joshua,
An Assembly Manual is shipped with every kit. You also will get the
Owners Manual.
Yes, the KXUSB is shipped with the radio.
73,
Don W3FPR
On 12/11/2019 12:39 AM, Joshua Gould wrote:
Greetings,
I'm getting ready to pull the trigger on a KX3 in the next week or so, and
was going
I have two that are pretty much identical.
K3/100W/Auto-tuner/2 optional filters
Receiver 1: 2.7/500/200 Receiver 2: 2.7/500/200 SN 4xxx
Receiver 1: 2.7/500/250 Receiver 2: 2.7 SN7xxx
Power cords, manuals on each included.
Both look the same, no issues.
$2,100 for either, off line
"If you are polling the transceiver and have fairly recent version of firmware,
the ATU will change frequency at the boundary of the segment, with no
hysteresis. Twiddle your VFO knob in standby and you will here the relays
clicking right at the edges."
An explanation of how the tuner follows
♪♫♪ We never eat fruitcake because it has rum,
And one little slice puts a man on the bum.
Oh, can you imagine the pitiful plight
Of a man eating fruitcake until he gets tight? ♫♪♫
--Song of the Temperance Union
73,
Gwen, NG3P
On Tue, Dec 10, 2019 at 11:37 PM Edward R Cole wrote:
> Actually
38 matches
Mail list logo