Re: [Elecraft] K3 s/n 2274 update to new synthesizer board

Hi Don I was thinking of you when making this inquiry.  Thank you!   I’m also changing K3 to other changes: usb io, plus adding the 2 meter and GPS boards aimed at the digital mode use.   Awaiting last K3 update production boards to arrive in June.   Again thanks for tip on synthesizer board

[Elecraft] K4 production software release 13 now available

K4 production software release 13 is now available. We strongly recommend that all K4 owners perform the update to remain current and take advantage of the latest improvements. An Ethernet connection is required to obtain new software. The K4 accesses our software server directly. To perform

[Elecraft] “Direct connect” of a K3/0 to K3s feasible/possible?

Is it possible to connect, using just copper wire a K3/0 to a K3s and forgoing a pair of Remote Rig devices? The use case is a K3s rack mounted in my house and a lot of cat6 (4x pair of copper) wire running around that is not connected to my LAN. The K3/0 would be in another room and I’d use a

[Elecraft] Update: For Sale: W2 and TX Mon for P3

The W2 has been sold. The TX Monitor for the P3 with 2KW 1-54 MHz coupler is still available. Thanks. From: gjpur...@gmail.com Sent: Monday, May 10, 2021 9:45 PM To: elecraft@mailman.qth.net Subject: For Sale: W2 and TX Mon for P3 W2 with two 1.8 to 54 MHz directional couplers- $250

Re: [Elecraft] K3: Replacing Headphone Jack

Thanks, Brian, for providing the answer. 73, Pete N4ZR Check out the new Reverse Beacon Network web server at . For spots, please use your favorite "retail" DX cluster. On 5/11/2021 4:13 PM, Brian Moran wrote: Answering the question you posed: check the

Re: [Elecraft] KX3 for Sale (SOLD)

Pending payment, the radio has been sold. Thanks to all those who showed interest. 73 de K6SBA David in Santa Barbara, CA Message: 16 Date: Mon, 10 May 2021 21:52:52 -0400 (EDT) From: David Inger mailto:ingerassocia...@cox.net > To: Elecraft@mailman.qth.net mailto:Elecraft@mailman.qth.net

Re: [Elecraft] K3: Replacing Headphone Jack

I used a Genovation external key pad to fire macros at things K3 related... That way I don't need a software package to fire the macros off... 73, and thanks, Dave (NK7Z) https://www.nk7z.net ARRL Volunteer Examiner ARRL Technical Specialist, RFI ARRL Asst. Director, NW Division, Technical

Re: [Elecraft] K3: Replacing Headphone Jack

I do about the same, I feed the headset from the rear of the K3. 73, and thanks, Dave (NK7Z) https://www.nk7z.net ARRL Volunteer Examiner ARRL Technical Specialist, RFI ARRL Asst. Director, NW Division, Technical Resources On 5/11/21 11:47 AM, Jim McDonald wrote: To reduced wear on the

Re: [Elecraft] K3: Replacing Headphone Jack

To reduced wear on the headphone jacks, I leave my headphones plugged in all the time, both the front and rear panel jacks. I turn the speakers on and off with a macro: MN097;UP;MN255; I have the macro available in three (!) places: DXLab's Commander K-Pod Win4K3Suite

[Elecraft] K3: Replacing Headphone Jack

I'm about to replace the headphone jack on my K3 - the first two times it failed I had Elecraft do it while it was back there other work, but this time, it's otherwise FB, and I have the part, so... I can probably reverse-engineer the removal of the front panel from the original construction

Re: [Elecraft] Microphone Jack Cover

On 5/10/2021 1:57 PM, PATRICK HICKS wrote: I made several covers from discarded PL239 shells left from replacing old connectors. Simply cut the shell down above the knurled area and glue or solder a plate in the hole. This was before 3D printing was widely available. If I recall, covers for

Re: [Elecraft] K2/100

Doug, Peer into the side of the KPA100 (the side where the coax and power connections are) - If you see blue toroid cores, the upgrade has been done.  If you can only see red toroid cores in about the middle of the board, the lastest update is not installed. 73, Don W3FPR On 5/11/2021 1:00

Re: [Elecraft] K2 #7997 is alive

Building a K2 takes quite an investment of time. But, once you've completed it and made your first QSO where you proudly say "Rig here is an Elecraft K2 that I just finished building...", you have a sense of ownership unlike anything you just took out of a box and plugged in. It's a marvelous

Re: [Elecraft] K2/100

Do you happen to know at what point the upgrades were included? Is there an easy way to determine if the update is present or Not? tnx -- Doug -- K0DXV On 5/10/2021 2:56 PM, Don Wilhelm wrote: Larry, The KPA100UPKT totally revamps the T-R switch section on the KPA100, so the answer is yes.

Re: [Elecraft] K3S Fault

__ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list:

Re: [Elecraft] Elecraft CW keying mistakes using bugs - semiautomatic keys

Many thans to all, and a special thanks to KN5L for the oscilloscope traces I will insert a debouncer before the key input of my K3S. I have some MAC bugs with the mechanical debouncers, but on the Mac 1937 with debouncer seem to persist a bounces problems, and with the Mecograph the problem

Re: [Elecraft] K3 (S) Weird Main RX issue

Thanks to all so many who replied, also off list. I found the K1 relay on the SUBIN board to be faulty. Ordered a new one and will see what happens after. 73 Udo, DK5YA hashtag: #cantwaituntilmyK4arrives Am 08.05.2021 um 10:55 schrieb Udo Langenohl - DK5YA: Gentleman, I have a problem

Re: [Elecraft] Share a port for KPA500

Tnx to Andy and Bob for the feedback on this. Yes the manual says that the Main / Sub radios must be connected at 115,200 bps, and while it was some time ago, my testing here seemed to prove it true. The 890 does install 2 virtual com ports for the USB connection: standard and enhanced.