There was a time when one could email Elecraft support with the K3 serial
number and they would send the factory Config file. Probably not 100% of the
solution but it would be a start.
73,
Brian, K0DTJ
> On Oct 17, 2023, at 09:05, W3FPR wrote:
>
> Jim,
>
> It is doubtful that will work
Jim,
It is doubtful that will work if the K3 has been set to factory defaults
by EEINIT.
73,
Don W3FPR
On 10/17/2023 11:59 AM, Jim McCook wrote:
Dave,
Open the K3 Utility and click on Calibration. Scroll down to
Configure Crystal Filters. The top line shows the various bandwidths
of
Dave,
Open the K3 Utility and click on Calibration. Scroll down to Configure
Crystal Filters. The top line shows the various bandwidths of the
installed filters. You can see the big picture there with the checked
boxes.
Jim W6YA
Dave,
Remove the top cover - there should be a sticker either on the bottom of
the top cover or on the top of the sub-RX showing the filters installed
and the offsets if they are not the 8 pole filters.
If the sticker is not present (or is incorrect), then yes, you will have
to remove the
4 matches
Mail list logo
