I miss KX2 contents in this list. I remember now that a separate list server is
being used. How would I join that list?
Art VE9BP
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
In an earlier posting I wondered if this hamfest will be streaming the speakers
sessions. The special interest had been Wayne’s KX2 talk about its features for
SOTA type of field trips. The hamfest organizer has advised me that this
hamfest will not be streamed as I had inquired.
Art Gunn
The subject hamfest is too far away to attend but "the SOTA related
optimizations embodied in the KX2" that Wayne will talk about is of great
interest. Wayne, is there a way to share this information or the presentation
with us after your Feb 4 presentation?
73
Art Gunn VE9BP
There are references on QRP web sites related to KX1 about a set of 6 KX1 cheat
sheets that were provided by Ken VE3HLS several years ago. Ken's computer files
are no longer available for these sheets.
Does anyone have copies the file for these sheets?
Thanks
Art Gunn VE9BP
ag...@nbnet.nb.ca
My memory of how I connected my K2 to this Ubuntu 8.10 computer has
faded over the last year. Although the Ubuntu version then was 7.04,
the computer was the same.
I have been attempting to configure the com 1 serial port with the
root command:
Initially this KAT2 worked well, switching between ant1 ant2. During
a lighthouse portable weekend, in hard driving rain, it may have
suffered from a precipitation static discharge via the connected
antenna. Since then, ant2 is always connected. The K-2 (#6155)
otherwise operates
. The
power supply in the article can be built from a premade circuit board
and your parts purchase from suppliers. Not a difficult build!
Mine has been in use for 7 months and it is a joy to use.
73
Art VE9BP
Arthur Gunn
74 Mill Bank Road
Nasonworth NB E3C 2C6
[EMAIL PROTECTED]
[EMAIL
to adjust?
73
--
Arthur Gunn VE9BP
[EMAIL PROTECTED]
[EMAIL PROTECTED] (files 5Mb)
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http
Today I tried scanning for the first time with surprising results.
Instead of staying on a signal for about 25 seconds, my K2 stays on a
signal for a random 3 to 18 seconds (usually less than 5 seconds). These
CW stations heard by scanning are often very strong and over 15 wpm with
no breaks in
: Arthur Gunn [mailto:[EMAIL PROTECTED]
Sent: Saturday, July 07, 2007 4:34 PM
To: [EMAIL PROTECTED]
Subject: K2 #6155 Resistance check page 55
Hello
My building has progressed well up to the point of resistance check at U6
pin 8 just prior to alignment test part 2. Instead of 100 Ohms, I
Hi builders
Progress seems fine except for a 36 ohm value measured at U6 pin 8
instead of 100 ohms (page 59). What values have you seen there? My
measurements were made with an Ideal auto-ranging DMM.
I see at least 8 paths plus active devices to be considered for
troubleshooting if 36 ohms is
This reflector is a valuable first stop in troubleshooting.
Is there any experience with the accuracy of the resistance value stated
in the manual, for resistance measured at the U1 pin 2 (and same values
for J1 pins 16 17) to ground as 22.6 kOhm rather than the suggested
range of 25 - 35 kOhm?
/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
--
Arthur Gunn VE9BP
[EMAIL PROTECTED]
[EMAIL PROTECTED] (files 5Mb)
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You
13 matches
Mail list logo