are
rated to.
On Mon, 2008-06-30 at 20:56 -0700, Blachura wrote:
What is a recommended fuse size for the K3? I have It hooked up with a
rigrunner.
Don...w2xb
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must
What is a recommended fuse size for the K3? I have It hooked up with a
rigrunner.
Don...w2xb
--
View this message in context:
http://www.nabble.com/fuse-size-tp18208773p18208773.html
Sent from the Elecraft mailing list archive at Nabble.com.
___
Need a little help in setting up my K3 with the navigator interface and mixw
or other softwares.
I have It sending cw without any problem. But I can't get it to send FSK.
When I send a cq it keys the rig and the interface but only get a steady
tone. No FSK. I can use the cat etc. Must have a
Well found the ghost in the shack that was printing the signals on the
laptop. Har!!The laptop is new and it has a spker on it... Killed the sound
from the K3 and the signals disapeared. I will be able to sleep tonite..
but still can't get the darn laptop to work with the K3.
Don...w2xb
--
Did you set the cw paddle in config menu to =dash ?
Don...w2xb
cptpatmcd wrote:
I know several of you out there have this set up, and this has been my
second biggest purchase since the K3. Only problem is, it's been no where
near the 'plug and play' that everyone else says it's
Hi Gary,
I just used my KX1 on a mini trip. Used a endfedz dipole for 80/40/20.
Worked great with the kx1. Used a small coax from the rig and ran the dipole
up into a low tree using my shoe as a weight to get it up there HI HI. (got
the shoe back ). the dipole is about 80ft long. and I had a very
Hello all,
I posted a message about a week ago asking if there would be any problems
taking a ham radio on a trip aboard a commercial airline.
Well I took my KX1 to my son's place for a long weekend. I never had a
problem. Packed it in my baggage. Battery, end fed dipole, small key, copy
of my
Hello Folks,
Going on a trip and was wondering what kind of hassle I would get if I
packed my KX1 in my baggage. Would it look like a bomb? Was thinking of
putting a copy of my amatuer ticket on the box. But I bet no one there knows
what a ham radio operator is. Is it worth the trouble?
Thanks for all the info guys.
Just wanted to check to make sure.
Thanks again for all the fast responses.
Don...w2xb
(great reflector)
--
View this message in context:
http://www.nabble.com/KX1-and-air-travel-tp16826174p16826174.html
Sent from the Elecraft mailing list archive at
Good Morning,
Set the AGC to SLOW. Seems to have taken care of the loud pop(in cw)
that I was getting now and then. Thanks to all for your help.
Don...w2xb
--
View this message in context:
http://www.nabble.com/k3--poping-noise-gone.-tp16001761p16001761.html
Sent from the Elecraft mailing list
Hello Folks,
Has anyone experienced a very loud POP' while working cw? I keep getting
one that sets you back in your seat.
Don...w2xb
--
View this message in context:
http://www.nabble.com/Loud-Pop-in-cw-tp15976683p15976683.html
Sent from the Elecraft mailing list archive at Nabble.com.
I'm sorry I didn't name the rig. Its the K3 and the pop is random. Have the
agc set to (fast) will try it on (slow) and see if it helps..
Thanks
Don...w2xb
--
View this message in context:
http://www.nabble.com/loud-pop-on-K3-tp15978162p15978162.html
Sent from the Elecraft mailing list
Hello Folks,
I have my K3 setup for digital modes. I am using mixw, can copy and change
freqs using software and the K3. Now how do I setup transmit? Cables etc?
Don...w2xb
--
View this message in context:
http://www.nabble.com/Psk31-xmt-tp15788263p15788263.html
Sent from the Elecraft mailing
Hello ,
Well my brain must have a little rust on it Couldn't figure out the psk
connetion setup. So posted a couple help messages on the site. Got great
help from several folks.
Did what they suggested and still was scrathing my head. So left the shack
for a while had lunch and came back and
Hello Folks,
Recieved my K3 on the 25th and been setting it up. Is there anyone that is
using mixw with the rig. I am almost there. Have it interfaced, but not sure
of the setting for Keying the K3. Any advice or setting would be
appreciated.
Don...w2xb
Ps. k3#403...
--
View this message in
15 matches
Mail list logo