I have a LP-PAN 2 Software Defined Panadapter for a K3 with Xonar U7 MK II
soundcard for sale. Plans have changed. Please contact me off-list at
n...@comcast.net mailto:n...@comcast.net Dave N8AG
__
Elecraft mailing list
Home:
I have a very nice, basic P3 for sale. Includes cables, copy of namual and a
wool/felt cover. $499, shipped and insured. Pleas respond off list to
n...@comcast.net mailto:n...@comcast.net . Tnx es 73, Dave N8AG
__
Elecraft mailing list
After much thought I've decided to sell my KPA500/KAT500 combination. I have
the KPA1500 and just don't see using them both. The amp is wired for 220VAC.
Both are in good condition. I never pushed the amp too hard, usually around 400
out, never above 500. I don't believe I still have the
I never installed this KXV3B board before selling my K3. This gives you the
preamps for 12, 10 and 6 meters. Please contact me off list if interested. The
ad is also QTH. n...@comcast.net mailto:n...@comcast.net 73, Dave N8AG
__
Does anyone recall or know what the K4D price was if you ordered back in May of
2019?
For those who have received their K4 on the East Coast, what was the shipping
cost for just a K4D?
I'm on the fence here as to whether or not I should invest in the K4. I'm also
considering the ATU but I
For those who placed early orders in 2019/2020 and are now getting or about to
get the notification that it is their turn, is the price being paid the
currently listed price or the price that was advertised way back when?
Dave N8AG
__
With a basic K4 how many antenna connections are there? (SO-239s) Do you get 2
RX antenna BNCs regardless of the K4 model? I'm wondering what antenna options
you have between the main and sub if you don't buy the ATU?
Tnx es 73,
Dave N8AG
A very good K3 with 2nd receiver setup with roofing filters for CW operation.
Std 2.7K in both rcvrs, 500 and 200 5 pole filters in main and 500 5 pole in
sub. No upgraded synthesizer boards as I felt they were a bit over priced.
KPA100, ATU, KXV3 Interface option for rx antennas and
Elecraft KX3 Setup w/Amp/Panadaptor - Fairly complete KX3 setup. Elecraft has
the KX3 on backorder for 4 to 6 weeks as it stands right now. This setup
includes the KX3 with internal ATU, filters and NiMH charger/realtime clock.
MH3 Mic (No paddles) Also includes PX3 panadaptor and the KXPA 100
Is there any documentation available on removing the 2nd receiver from a K3?
Tnx es 73,
Dave N8AG
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
Is there a separate list like this for just the K4? What's the link, if so?
Tnx es 73,
Dave N8AG
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
- This mail is in HTML. Some elements may be ommited in plain text. -
Hi,
How are you doing? Do you have an account with Amazon ? Please let me know.
Dave
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
I've been way too busy with work to keep up on the status of the KXPA100
amplifier. What's the latest? When? Price? It seems like the Elecraft website
has been saying coming soon for way too long. I'm seriously considering the
Ten-Tec amp, especially when I compare pictures of the two. It looks
I have the 0.1 - 200 watt, 1.8 - 54MHz directional coupler for the W2 for sale.
Please contact me off list if interested. n...@comcast.net
73,
Dave N8AG
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
The paddle has been sold. Thanks to all who responded.
73,
Dave N8AG
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This
I purchased my KX3 with the KXPD3 paddles, never used it, and have decided to
use my good ol' straight key or external Vibroplex. If you're looking to
purchase this option for your KX3, save $30. Price is $100 shipped Priority
Mail. Please contact me off list at n...@comcast.net or
I received KX3-F, serial number 0298 today. I ordered on the 28th at 1644Z.
I'm posting this to comment on shipping methods for Elecraft products. When I
ordered my KPA500 I designated UPS Ground as the preferred shipping method. I
received it 7 days after it was shipped by Elecraft. This
I have not figured out the decoding process for the KX3 as they are being
posted on the Elecraft website. I ordered the KX3 on 12/28/11 at 11:44AM EDT. I
received the confirmation order number 2208-4844-0913. I can't decode how that
correlates to the numbers being posted on the website other
The LDG AT-1000ProII is on a Dayton sale at Gigaparts for $459 with free
shipping through Monday, the 21st. (Must be ordered on-line) I just posted this
since there were $539 prices being mentioned on the reflector.
The KAT500 at $699 is quite a bit higher. Also, shipping to the East Cost via
I'm wondering how often the shipping status gets updated? The last one on the
KX3 is dated March 29 and states that the page will be updated regularly.
Additionally it asks folks not to call or e-mail for a status on their order.
(Understandable for sure) I'm sure many would appreciate a simple
Bought these, never used the LP-PAN and then decided on the P3. $170, shipped.
Please contact me off-list if interested. (n...@comcast.net)
73,
Dave N8AG
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
The items have been sold to the first person who responded that they would take
them. Thanks to all for the surprising number or quick responses.
73,
Dave N8AG
__
Elecraft mailing list
Home:
Just wondering what type, size and resolution of monitor or small screen TV P3
owners plan on using with the SVGA adapter that hopefully starts shipping
tomorrow?
73,
Dave N8AG
__
Elecraft mailing list
Home:
The Ten Tec tuners have already been mentioned by Jim, K9YC. I've found that
the old Dentron MT-3000As will tune almost anything. I have a pair of them that
I use on a regular basis with a long wire and pair of 65' almost vertical wires
on the low bands, 160 up to 40. They work very well and
I'm having an issue with my RX antenna when using the Y-Cable that comes with
the KPAK3AUX cable kit. I have the K3 with sub receiver, KAT3 and a PR6 preamp.
I initially hooked up the Y-Cable on the back of the K3. One pigtail going to
the KPA500 via the KPAK3AUX cable and the other pigtail
Actually, I don't believe it's necessarily an RJ11 jack (2 conductors or
wires) as it can also be used for RJ14 (4 conductors) or RJ25 (6 conductors).
It
is a jack that is capable of 6 positions. I believe the correct name depends on
how many wires are being used. I thought I'd just throw
I have a Radio Dust Covers K2/100 cover in Blue with Gold Lettering and a K2/10
top cover with speaker for sale. Please contact me off list if interested. I
have pictures available. You can see these items on QTH.com by searching for
ads listed with my call.
73,
Dave N8AG
The other side of this coin is that many K3 owners probably could care less
about this and are much more interested in other issues/enhancements. I could
care less if this ever got on the radar screen as far as features are
concerned. If it's not there yet, I hope it never appears.
I still
I see more use for the CW/CW-Rev config option than I do for Auto CW Speed. In
fact, auto CW speed is of no use at all here.
73,
Dave N8AG
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Bob,
Have you seen the P3 in person? You seem to know a lot about it. I'm not aware
of any official published specs that define how much current draw it requires
or anything else. The point I was trying to make in my post was that this guy
saw it in person and expressed his opinion. Why does
I think some of you guys are really over reacting to the comment made in the
link that was referenced. I read the blog and did not even see the K3
mentioned. It did say:
Elecraft had their little answer to the pan adapter, what a joke. It was a
little screen maybe 9 and made the radio look
Bill,
I find that both the 200Hz and 500Hz filters work just fine. I decided to save
$50 and not buy 8 pole filters. I think the 8 pole hype is somewhat just that.
I have a 2nd 500Hz in the second RX.
73,
Dave N8AG
__
Was the ordering info, and all of the pricing posted on the website Thursday?
If so, I can't seem to find it.
Tnx es 73,
Dave N8AG
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
KAF2 Audio Filter board for the Elecraft K2. I no longer need it since the DSP
board is now installed. Please contact me off list. Tnx es 73,
Dave N8AG
__
Elecraft mailing list
Home:
I noticed that when cycling thru the bands after 3.06 that 30Mhz was displayed
instead of a 6 meter frequency too. I simply direct entered 50.125 and all is
well when cycling thru the bands from either direction.
73,
Dave N8AG
No problem with a deep solar minimum lasting for another year here, even
longer. Some folks operate on the low bands, 160 and 80 maybe 40. It's a good
time in the cycle for us. When things peak it will be nice if 6 meters opens
up. As far as 20 and the other bands gosince we're talking
Do you guys really expect to see one or both of these released at Visalia or
Dayton? Think about how much time and effort Wayne, Eric and Co. are still
putting in on the K3 and all of the wishes to make it a do everything just
the way I want it radio. Not to mention the on-going improvements
I have a LP-PAN panadaptor and EMU-0202 sound card for sale. The LP-PAN was
factory-built. They work fine, but I just don't have time to play with them.
Please contact me off list if interested.
Tnx es 73,
Dave N8AG
__
I've used a PAR End-Fed on 30 meters with great results. I'm planning on buying
the 17 meter version and maybe one for 15. I use it as a half-wave sloper. I'd
recommend giving one a try.
73,
Dave N8AG
__
Elecraft mailing list
Bravo Wayne,
Well said on the software development of the K3. It amazes me when folks on
here start listing items they want to see implemented and then define just how
difficult or easy they are to do. It's as if they think their assigned degree
of difficulty will expedite the implementation.
I have the KAT100 XV50 posted for sale on QTH.com if anyone is interested or
in need of this equipment. Please respond off list or per the QTH ad.
Tnx es 73,
Dave N8AG
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a
Tom,
Yep, contests are much more important than gentlemen's agreements and courtesy
these days. (IMHO)
Unfortunately, you are correct. Thankfully there are still some CW only
segments to keep all the SSB contest stations at least a little way away.
73,
Dave N8AG
I have an extra, brand new, Nifty Elecraft K2 Plus Options Mini-Manual for
sale.
Also have a brand new US Interface Navigator cable for the K3 for sale.
If interested, please contact me off list.
Happy New Year to all,
73,
Dave N8AG
___
I find the K3 to be just fine on 6 meters. For extremely weak signal work, an
external preamp may be needed. Time will tell. I've used the Flex 5000A, Pro
III and the K3 on 6 meters. As far as signal reception goes, I could not notice
any difference between the 3 rigs. I could A/B/C them. The
I think that Wayne, Eric and company need a break after the K3 settles down.
There are numerous good amplifier choices out there. I wonder if some think
that with the Elecraft name on their amplifier it will make the same
differences that the K3 does when compared to other transceivers?
73 es
I thought the Ameritron Amps were basically the design of Denny Had of Dentron
fame. (Also, I think, Amp Supply in addition to Ameritron.) I don't think MFJ
had much to do with the designs of the tube amps.not sure about the SS ones.
73 es Merry Christmas to all,
Dave N8AG
Can we end this thread? It seems to have drifted away from Elecraft. I, and I
believe others too, could care less about all these numbers and the discussions
surrounding them.
Dave N8AG
___
Elecraft mailing list
Post to:
I agree that there were quite a few stations running ultra high speed CW. They
should slow down a bit or at least answer a station replying at a slower speed.
I'm not sure just what the definition of really slow speed is these days, but
some operators, myself included, love to use a straight
I have a new Navigator to K3 cable for sale. Also have a 2-Way, 25 pin,
straight thru, switch box that will allow the Navigator to be switched between
two radios. I will sell them together or seperately. Please contact me
off-list. 73 Dave N8AG
Right on Joe If you want a test instrument, purchase a test instrument
and don't load up the cost of the K3 for all of the other
users.
It seems like a few folks are never satisfied. They want more and more and
more... It seems like there is no end to it.
I don't think too many folks
My brother is working on an intermittent problem with 40 meter receive. It
started out with 40 meters going almost dead. Tapping on the chassis would
return the receive function to normal for awhile. He just opened up the radio
and tried to track down the problem. The KXV60 board, when tapped,
I have a like new U.S. Interface Navigator with K3 cable for sale. I've never
used it and probably won't. Please contact me off the reflector if interested.
73,
Dave N8AG
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be
I found that the K3, as built, was a bit better on 6 meters than either my Pro
III or TS-2000x. (A/B/C switching) I've since sold both of those radios. I
bought a 6 meter preamp from High Sierra Microwave. It has about the same specs
as the ARR P50VDG mentioned on here and the Elecraft
After reading all of the stories of problems with the KRX3, I've decided not to
install the one I received a couple of months ago. I originally planned to wait
and see how other installations played out especially after reading that the
front panel had to be removed and messed with in order to
I see folks using the US Interface box along with HRD. What are the advantages
of using Navigator with HRD over just using HRD alone? I have LP-Pan here but
have not yet set it up.
I primarily operate low band CW on 160 and 80 ( 40 when there's not much on the
lower bands). I'd like to play
This list is quickly becoming somewhat of a waste of time to read. There are
those who would like to redesign the K3 or critique various aspects of it, such
as distortion or keying, to those who would like it personalized for
themselves. It seems like Elecraft gives an inch and then many want
I just received my KRX3 along with the 2.7K and 500Hz roofing filters. I'm
wondering for diversity reception how big a deal is it that they be matched? My
500Hz filters have -.80 and -.77 offsets, while the 2.7Ks have -.84 and -.90. I
don't really care about SSB, but am a little concerned about
I saw a post last week that someone who ordered on May 7, 2007 received their
KRX3 notice. I guess that means it would be shipping in 1 to 2 weeks. I ordered
my KRX3 with my original order on May 25, 2007 which equated to K3 #414. I have
not yet received my notice.
I would imagine that those
Wow - never thought anything as simple as a band select button would cause such
commotion. Back when there were rotary bandswitches you had to go through 40 to
get from 80 to 20. How did we ever manage that? Such silly stuff.
73,
Dave N8AG
PS - wonder which button is next on the list?
Saw this But I really don't think it's about panel space, it's
about how the designers want us to use the K3...
Isn't that true with the Icom, Kenwood and Yaesu radios? You have to use it the
way it's designed... What a concept. I hope Elecraft has their filter
working on this one, drops
Brian, K3KO wrote:
It's a pain to cycle through
FM/AM just to get from CW/SSB -- since the proper one press direction to go
isn't something that one should clutter their minds with
My K3 doesn't have to go through AM and FM to get from to get from CW to SSB. I
just press the ^ to go from CW to
It sure seems that the KRX3s are shipping at a snail's pace. So far I've only
seen radios up to S/N in the 100s getting theirs. Did I miss some or what? It
looks like I'll get mine about a year and a half after ordering it. (on
5/27/2007)
Dave N8AG
K3 # 414
Since the installation of both of these options requires removing the front
panel, wouldn't it have made more sense to release these two at the same time?
It seems to me that you're just flirting with trouble when you keep opening the
radio up time after time. I know some will say it's easy, no
I'm wondering what those who have installed the 2nd RX in their K3 think of the
procedure? I took a quick look at the manual and it seems like you have to take
half the radio apart for this. I'm not sure I want to do this to a rig that is
currently working FB. I'm not crazy about pulling the
I only have a 5 element 6 meter beam at 30 feet or sonothing stacked or
high in the air. I hear an increase in background noise that is equal to or
better than what I heard on my now ex PRO III. It is also more than on the Flex
5000A. The K3 performed very well during the June VHF contest.
G'day to all,
I have a couple of K2s that I would like to exchange options in and am
wondering just how involved it would be. I did not build either of these radios
initially.
Here are the two radios:
K2/10 S/N 02689 with KSB2, K160RX, K60XV, KNB2, KAF2, KAT2
k2/100 S/N 3523 with KSB2 ( I
Well said John,
The ME, ME, ME generation is everywhere these days. Unfortunately, that
includes ham radio. All of the MEs want their own custom K3. I love the K3
just the way it is. I look forward to whatever Wayne, Eric and company decide
to incorporate into the K3 or other radios in the
A bandscope like the Flex 5000A's would be ideal. It works great.as does
the radio, even on CW since I have no need for anything close to 50 wpm. Keep
in mind that the Flex 5000 uses it's own, high performance sound card, not a
typical PC sound card. But there are knobs and buttons on the
I was wondering about any Dayton news also. I was guessing that Icom might be
trying to unload PRO IIIs with the 7700 out now. I've sure seen lots of PRO
IIIs up for sale. I got rid of mine just in time. Only American made rigs from
now on. Elecraft, Flex, Alpha and Dentron.
73,
Dave N8AG
I wanted to check out 6 meters tonight and could not get the K3 to sequence to
that band. Direct freq entry of 50.125 went to 30.000Mhz. I thought 6 meters
appeared previously, but with the band as it currently is, never paid much
attention to it.
Murphy's Law - tonight is the 6 meter sprint
I agree completely Dave. Maybe those who continually complain should buy a JA
radio and join that list to see what they get. Nuff said.
73,
Dave N8AG
Be a better friend, newshound, and
know-it-all
It seems like many folks on here have THEIR better way for Elecraft to do
just about anything and everything. Instead of being satisfied with all of the
good things that Elecraft does do, they find all kinds of things to whine and
complain about. They seem to have a better way to do the
I guess that he ordered a few K3s to make a profit on them while Elecraft
catches up. Some folks must be willing to pay a premium for not having to wait.
The law of Supply and Demand is applied here, although, in my opinion, it's
sure not, in the spirit of ham radio. I know I wouldn't do it,
I'm wondering if any KRX3s where actually shipped today as per the website? If
so, how many? It looks like it may still be a horse race with Flex-Radio to see
who actually gets their second receiver out to customers in any quantity at all.
73,
Dave N8AG
K3 #414 w/KRX3 ordered with original
Wouldn't the KRX3 be considered a coming attraction? No word on its status
as of today, the 25th, and the projected shiping date. Was this just a carrot
being dangled in front of those who have waited almost a year? I would hope
not, but. I believe the KRX3 was being offered along with
I need to make room for a different filter and decided I don't need the 1.8K. I
noticed that many rigs are being shipped with that filter back ordered. If
you'd like to get that filter before they are back in stock, please contact me
off-list.
73,
Dave N8AG
I'd look a PAR Electronics OA-50s for a horizontally
polarized omni-directional antenna before the M2s or
KU4ABs. I've tried all three and the OA-50 is the only
one I still have.
73,
Dave N8AG
You
Let me start off by stating that I'm not looking for a
spec by spec comparison of these two radios. The jury
is already in on that. I hope I can just keep a few
shots from firing by saying that first.
I'm interested in hearing from anyone who has both the
Omni VII and a K3. I'd like to know from
I just bought a pair on ebay for $79.00 shipped free.
I believe this seller has one pair left. They were
listed at $89.99/Best Offer, with free shipping. I
offered $75 and he countered with $79. It was a done
deal. You can search on seller audio-topia.
The link:
My K3 keys my Alpha 76A just fine. (Non-QSK) I just
ran a RCA plug jump from Key Out to the amp. No
problems. The Key Out is spec'd at +200VDC @ 5A. I
guess someone was thinking about folks with older
amps. :-) I don't use ALC so it's not an issue.
73,
Dave
N8AG
It would appear that Elecraft is ahead of their posted
shipping schedule. Two posts on here indicate that K3s
ordered on the 28th and 30th of August are on the way.
The Shipping Status on the Elecraft website says
that through today, 3/14/08, they would be shipping
orders received up until August
I have a KDSP2 kit that I've decided not to use. If
interested, please contact me off-list.
73,
Dave
N8AG
Never miss a thing. Make Yahoo your home page.
http://www.yahoo.com/r/hs
Doug Wrote:
This price increase should not have been a surprise
to anyone.
When the K3 first came out, there were numerous posts
about gosh, how
inexpensive is that!.
It was even compared to a loaded K2 and boy..they
sure were close.
Did this make sense to us? Not really (marketing
aside).
All of this whining about what Elecraft should do is
getting old. I think they keep folks much better
informed than any other ham radio company.
I don't see where folks get off thinking that Elecraft
is obligated to tell them any and all things that are
going on. If there's something that Wayne
Maybe everyone on this list should put their own
review, even a short one, with their rating, on EHAM.
73,
Dave
N8AG
Be a better friend, newshound, and
know-it-all with Yahoo! Mobile. Try it now.
Per a request, here's some additional info on the ESD
mat from Radio Shack:
They call it an Anti-Static Service Kit.
Radio Shack Part# 276-2370
Specs:
Vinyl - 26 x 24 inches
Ground Cord 10' - Banana type plug or an alligator
clip
Connector: Banana Jack - built-in 1Meg Ohm resistor
Wrist Strap
A call for JA only does me no good due to the
different beam heading
to here and
also being vastly outnumbered by JAs.
Isn't getting through a pile-up part of the fun and
challenge of DXing? What fun would it be if VP6DX just
went through a list by calls?
I haven't heard them working the
I just bought the KSDP2 kit but have decided to not
build and install it. Please contact me off list if
you're interested in it.
73,
Dave
N8AG
Be a better friend, newshound, and
know-it-all with Yahoo!
Paul,
I picked up an ESD mat at Radio Shack. I was a nice
size, had pockets for tools to stay in, the wrist
strap on a coiled cable and a 6 foot or so connection
to ground either via and alligator clip or banana
plug. The biggest problem was remembering to
disconnect the wrist strap ( via a
After assembling my K3 over the last three days I'm
very impressed with the manual, the fit of the boards
and the construction and fit of the chassis. At this
point, I have not put the radio on the air. ( I'm
waiting until the XYL hits the hay tonight so I can
stay up as late as I want to. - She
After a small e-mail issue, my K3, serial number 414
arrived today, February 14th. Ordered on May 25 with
50% deposit.
73,
Dave N8AG
Never miss a thing. Make Yahoo your home page.
I'm wondering if anyone has heard of K3 shipping dates
for orders later than May 25th? I received an invoice
number/notice last Sunday but one item was missing
from it. I notified Lisa of the issue immediately and
was told I'd receive a corrected invoice. I've heard
nothing since. The original
It seems like most of those calling for a list of
issues and enhancements are ones who have already
received their K3. First, they whined about the
delayed shipping, and now, once they have their K3,
have found something else to whine about. Maybe they
should consider investing the time spent
I guess this is a tool for those who either only had
to pass a 5 wpm CW test or none at all. Now they can
QRM the low end CW portions of the bands by pushing a
button and letting their radio send 599 or some
other programmed response that they couldn't do with a
key. It's rather sad.
73 es gud
I received my invoice today from Lisa. Once again,
it's a Sunday afternoon in Aptos and she's working
away. The order to be shipped is as follows:
K3/10
KPA3 - 100 Watt Upgrade
KFL3A-200 200Hz - 5 Pole
KFL3A-500 500Hz - 5 Pole
KXV3 - Xvtr Interface w/RX Antenna In/Out Jacks
I ordered on May
Interesting that Doug received his K3 ordered on May
18th (Was that ordered at Dayton?) and another
notification was sent for a K3 ordered on May 21st.
What happened to all of those Dayton Weekend Orders?
Or did the folks at Dayton all wait until they got
home and placed orders that following
I've never used the auto tuner in my Pro III or
TS-2000x. I didn't order one with my K3 as I hate auto
tuners. Go buy a good old Dentron MT-3000A. It will
tune anything...
Dave N8AG
Be a better
Also, $.95 got tacked on to quite a few things. :-)
I'll bet the KRX3 will go up soon after it's available
or perhaps even before. If you want it, order it
nowyou can always cancel later.
Dave N8AG
I'm not wondering if the price will be higher on my
order. I expect each item to be at the price it was at
the time I placed my order(s). Be sure to check your
original confirmation which lists what the prices were
when you ordered.
Dave N8AG
1 - 100 of 106 matches
Mail list logo