I found that there is a terminal block inside most Astron Power
Supplies, that sometimes gets mounted on a painted surface.
I always check all Astron supplies I buy, new or used, to insure the
paint has been removed under the ground connection of the internal
terminal block. In about 50% of
Gwen,
I too am on Windows 7 for my Amateur Radio software, and see the same
thing, but, I also understand why authors won't support W7 anymore, it
is a dead OS, and even the vendor for it is no longer supporting it.
I have one windows box for Amateur radio, and the other computer I use
for
What a nice piece of work Jim, thank you!
73s and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Technical Specialist
ARRL Volunteer Examiner
ARRL Asst. Director, NW Division, Technical Resource
On 6/8/19 3:53 PM, Jim Brown wrote:
On 6/8/2019 3:08 PM, Bob McGraw K4TAX wrote:
I do wish he would
They have all more than likely been signed to NDAs... If not Elecraft
is crazy...
73s and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Technical Specialist
ARRL Volunteer Examiner
ARRL Asst. Director, NW Division, Technical Resource
On 6/5/19 11:54 AM, Leroy Buller wrote:
Are there any K4
Based on the lack of ability to chance the CW rise times, I suspect
Elecraft will not give access to the processor, and OS. I would not.
Why? If too many users change things, and break things, the radio will
get a bad rep... If Elecraft is smart, they will lock the users out of
that level
John,
That implies that all the noise is coming from the PS! I has always
assumed that most of the noise was from the monitor itself!
73s and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Technical Specialist
ARRL Volunteer Examiner
ARRL Asst. Director, NW Division, Technical Resource
On
That is how I buy potentially noisy items as well...
73s and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Technical Specialist
ARRL Volunteer Examiner
ARRL Asst. Director, NW Division, Technical Resource
On 5/26/19 7:30 PM, Bob McGraw K4TAX wrote:
I know it is really aggravating but many
Vendors change suppliers all the time, this insures that a once quiet
piece of equipment, stands a good chance of becoming a noisy piece of
equipment in the future, or vice versa. Hence why lists don't always work.
73s and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Technical Specialist
I do the same, sort on reflector, then things become simple... If your
email client allows sorting, sort on the sender...
Jim,
I also use Thunderbird! :)
73s and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Technical Specialist
ARRL Volunteer Examiner
ARRL Asst. Director, NW Division,
the house - trust
me it makes a difference!
Hank
K4HYJ
- Original Message -----
From: Dave Cole (NK7Z) (d...@nk7z.net)
Date: 05/21/19 11:30
To: Elecraft Reflector (elecraft@mailman.qth.net)
Subject: [Elecraft] P3: Removing the plastic display cover
Hello,
I have a bit of dust behind the plast
Hello,
I have a bit of dust behind the plastic display cover on my P3, between
the case and the cover.
In reviewing the kit assembly instructions, it looks as if the four
screws on the four corners of the plastic display cover are also used to
hold the entire display board in place on the
It will be interesting to go through the for sale ads on QRZ, and QTH
looking at who sold a K3S in the months leading up to the release date
of the K4, then do the same for the time period of the K3 to K3S
transition.
If it is the same people, then we can guess at who had advanced
knowledge,
SNAP!!
73s and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Technical Specialist
ARRL Volunteer Examiner
ARRL Asst. Director, NW Division, Technical Resource
On 5/16/19 4:35 PM, kevinr wrote:
Yes.
On 5/16/19 4:32 PM, kb2mj...@att.net wrote:
Do you have any documented proof of this, like I
It IS in your buffer...
73s and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Technical Specialist
ARRL Volunteer Examiner
ARRL Asst. Director, NW Division, Technical Resource
On 5/16/19 10:56 AM, Frank Krozel wrote:
It IS on the Elecraft site
Print that page to a file...
73s and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Technical Specialist
ARRL Volunteer Examiner
ARRL Asst. Director, NW Division, Technical Resource
On 5/16/19 12:36 PM, Dick Dickinson wrote:
Price of K4..?
As a starting point, consider the "Spring Special" on
Phil,
You nitpicker you! :) Was good to see you in PDX last week!
73s and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Technical Specialist
ARRL Volunteer Examiner
ARRL Asst. Director, NW Division, Technical Resource
On 4/26/19 11:22 AM, Phil Kane wrote:
On 4/26/2019 11:01 AM, Wayne Burdick
Now that is funny!
73s and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Technical Specialist
ARRL Volunteer Examiner
ARRL Asst. Director, NW Division, Technical Resource
On 4/26/19 3:08 PM, donov...@starpower.net wrote:
It especially depends on what part of the world you're in...
Years ago
ys working on something new.
The real question is "when", and that will be unknown until it is
announced.
Whether it will be called "K4" or something else remains to be seen at
announcement time.
73,
Don W3FPR
On 4/16/2019 7:20 PM, Dave Cole (NK7Z) wrote:
Hi Wayn
Hi Wayne,
OK, I'll be the one to ask... Is this Elecraft's way of saying a K4 is
forthcoming? ;)
73s and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Technical Specialist
ARRL Volunteer Examiner
ARRL OOC for Oregon
On 4/16/19 8:56 AM, Wayne Burdick wrote:
It has often been stated, by
And?
73s and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Technical Specialist
ARRL Volunteer Examiner
ARRL OOC for Oregon
On 4/15/19 5:22 PM, CUTTER DAVID via Elecraft wrote:
I had a nice chat with Eric talking about remoting the P3
David G3UNA
On 15 April 2019 at 23:01 Barry Baines via
Hello,
I am considering the use of a remote base type of setup to get away from
the RFI in my area. I have finally given up on trying to fight it, and
want to move the rig away from the city, as opposed to hunting down and
correcting every new RFI source endlessly.
My station consists of a
Thank you gents! Now to uppack my KPA500 which came back from support
today...
73s and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Technical Specialist
ARRL Volunteer Examiner
ARRL OOC for Oregon
On 4/8/19 1:31 PM, Bob McGraw K4TAX wrote:
I agree with Joe in the procedure. As to using or
A few months ago someone asked how to move the antenna signal coming in
on the main antenna connector of a K3 to an external SDR via some
connector in the rear of the K3.
The answer indicated connecting the SDR antenna to some connector in the
rear of the radio, and pressing some number of
Actually keeping this thread open is a better thing...
It lets Elecraft users see what other options are available...
That said-- I know I would never add an MFJ item to my K3. The fact
Elecraft has allowed this thread to continue shows how open minded
Elecraft is, and how sure of their
How is HAARP involved in this conspiracy, it must be!
73s and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Technical Specialist
ARRL Volunteer Examiner
ARRL OOC for Oregon
On 4/3/19 12:30 PM, Fred Jensen wrote:
The week number register is in the hardware aboard the GPS satellites,
although
Hi Jim,
You want to look at a wider range of frequencies than the K3 IF
presents. See:
https://www.nk7z.net/sdr-rfi-survey-p1/
for a how to do this, using an SDRPlay radio.
That link goes to part 1 of a multi-part set of articles covering how I
use SDRPlay radios to see just what is
I must say, I agree 100% here... Upgradeable radios protect the
Elecraft user-base, and overall I suspect sell more radios... I know of
at least one person that was considering a K3, until this thread
started, now he is waiting until Dayton. Previous to that he waited...
I suspect most
Put a web server in the K4, and control it that way via IP... Also put
in JSON for radio status, and add some IP based controls for everything.
73s and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Technical Specialist
ARRL Volunteer Examiner
ARRL OOC for Oregon
On 3/25/19 4:59 AM, Mike
Hi Jim,
Thanks for the detailed response!
73s and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Technical Specialist
ARRL Volunteer Examiner
ARRL OOC for Oregon
On 3/24/19 7:54 PM, Jim Brown wrote:
On 3/24/2019 4:41 PM, Dave Cole (NK7Z) wrote:
Have you found a good speaker for the K3? If so
I suspect touch screens are just a fad for rigs... Imagine one in your
moving car...
73s and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Technical Specialist
ARRL Volunteer Examiner
ARRL OOC for Oregon
On 3/24/19 5:35 PM, Al Lorona wrote:
Thaddeus sits down at the rig. Today is the day
at
nature.
Or use a pair of the SP3 speakers for a complete and matching K-Line
station.
73,
Don W3FPR
On 3/24/2019 7:41 PM, Dave Cole (NK7Z) wrote:
Jim,
Have you found a good speaker for the K3? If so, which one is it?
__
Elecra
one 6S
On Mar 24, 2019, at 4:41 PM, Dave Cole (NK7Z) <mailto:d...@nk7z.net>> wrote:
Jim,
Have you found a good speaker for the K3? If so, which one is it?
73s and thanks,
Dave (NK7Z)
__
Elecraft mailing list
Home: http://mailman.
Jim,
Have you found a good speaker for the K3? If so, which one is it?
73s and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Technical Specialist
ARRL Volunteer Examiner
ARRL OOC for Oregon
On 3/24/19 1:25 PM, Jim Brown wrote:
On 3/24/2019 12:29 PM, Dave Cole (NK7Z) wrote:
My current K3
Now that I have owned a K3 for a few years, I have what the new folks
don't have, K3 experience...
Here is my take on this, now that I have some experience under my belt...
How much better can Elecraft make a K4, as compared to a K3?
I am already atmospheric noise limited, so sensitivity is
I found the same, so I put together a process of using an external
keypad to control the K3. I use a Genovation 64 key keypad, and can
fire macros at the K3/P3 using it.
See:
https://www.nk7z.net/adding-external-keypad-k3/
I also have a spread sheet about half way down, under "Tips", that
Thanks Jim!
73s and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Technical Specialist
ARRL Volunteer Examiner
ARRL OOC for Oregon
On 3/14/19 11:11 AM, Jim Brown wrote:
On 3/14/2019 7:51 AM, Dave Cole (NK7Z) wrote:
Has anyone interfaced a set of DC H7030 headsets to a K3? If so, what
were
Hi,
Has anyone interfaced a set of DC H7030 headsets to a K3? If so, what
were the results? Did they work, how did they sound on receive and
transmit? I have inherited a set, and am considering using them, and
looking for thoughts on this prior to getting them connected...
--
73s and
.
73,
Victor, 4X6GP
Rehovot, Israel
Formerly K2VCO
CWops no. 5
http://www.qsl.net/k2vco/
On 10 Mar 2019 20:57, Dave Cole (NK7Z) wrote:
I have been thinking of that. When you did it, was your P3 revocered
to the same exact setup as when you saved the config file? Did you
have to resetup anything
/03/2019 18:14, Dave Cole (NK7Z) wrote:
I am seeing something similar to this as well... Not in SPAN, but in
REF LVL. I set REF LVL while on 30 Meters, and leave the band.
Ssometimes when I return to 30, I need to touch the REF LVL level to
get it to return...
By touch, I mean I select REF
I am seeing something similar to this as well... Not in SPAN, but in
REF LVL. I set REF LVL while on 30 Meters, and leave the band.
Ssometimes when I return to 30, I need to touch the REF LVL level to get
it to return...
By touch, I mean I select REF LVL, then just turn the knob ever so
into the KPA when he
thinks it is. If not, then it is time to diagnose things in the K3.
The folks down in Watsonville are very good at diagnosing system problems of
this sort. Calling them to help solve the issue would be a good thing.
73!
Jack, W6FB
On Mar 7, 2019, at 5:50 PM, Dave Cole
I am writing this for a friend, who for now, has limited access to he list.
He has a KPA500/KAT500/K3. All was working fine last time he used it.
Today, the amp comes on, but no power. Here are the details...
1. Amp shows the "*" when it keys.
2. K3 shows KPA500 ON, when the amp comes on.
Does FAST also remove the light delay in the audio?
73s and thanks,
Dave (NK7Z)
https://www.nk7z.net
Award Manager, 30MDG Grid Awards
ARRL Technical Specialist
ARRL Volunteer Examiner
ARRL OOC for Oregon
On 3/3/19 7:01 PM, Bob Wilson, N6TV wrote:
Check CONFIG:TX MON, to see if it is set to NOR
Hi,
I have an ALS-1306 amp, and Elecraft control cable for sale. Bought a
KPA-500, so the ALS is no longer needed. If interested, contact me OFF
LIST directly at my email.
--
73s and thanks,
Dave (NK7Z)
https://www.nk7z.net
Award Manager, 30MDG Grid Awards
ARRL Technical Specialist
ARRL
Logs? Can you expand on that a bit? Does the KPA500 keep logs? How
are they available please?
73s and thanks,
Dave (NK7Z)
https://www.nk7z.net
Award Manager, 30MDG Grid Awards
ARRL Technical Specialist
ARRL Volunteer Examiner
ARRL OOC for Oregon
On 2/28/19 1:35 PM, Kevin der Kinderen wrote:
the IF out
coax and the RS-232 connection.
The KAT500/KPA500 connect using the AUX cable - that is no
interconnection between the P3 and the KAT500/KPA500, they are entirely
separate.
73,
Don W3FPR
On 2/16/2019 9:06 PM, Dave Cole (NK7Z) wrote:
Can you expand
:
Hi Dave,
The pdf files you will find at
http://www.ke7x.com/home/k-line-introduction-and-set-up-guide may be of
some help.
73,
Fred KE7X
*From:* elecraft-boun...@mailman.qth.net
on behalf of Dave Cole (NK7Z)
*Sent
19 7:51 PM, Dave Cole (NK7Z) wrote:
Hello,
I have a K3, and a P3, connected to a computer. I now have a KAT500,
and a KPA500.
I do not see a full cabling diagram for the entire setup. Does one
exist? If so, where ca
Hello,
I have a K3, and a P3, connected to a computer. I now have a KAT500,
and a KPA500.
I do not see a full cabling diagram for the entire setup. Does one
exist? If so, where can I obtain it?
--
73s and thanks,
Dave (NK7Z)
https://www.nk7z.net
Award Manager, 30MDG Grid Awards
ARRL
Hi Bob,
On a related subject, but not quite what you asked about, if you are
just looking for a way to fire off macros at the K3, and have the SVGA
for the P3, see:
https://www.nk7z.net/adding-external-keypad-k3/
This is a way to use a 64 key Genovation keypad to fire off complex
macros to
It is one hell of a nice read Jim, THANK YOU for publishing it.
73s and thanks,
Dave (NK7Z)
https://www.nk7z.net
Award Manager, 30MDG Grid Contest
ARRL Technical Specialist
ARRL Volunteer Examiner
ARRL OOC for Oregon
On 1/13/19 9:24 PM, Jim Brown wrote:
I'm not going to go beyond this on the
Cole (NK7Z) wrote:
Hi Don,
Thanks for the combined brain power! I have a plan for testing if it
ever gets that far. I am just trying to see if the K3 receiver
recovers sufficiently fast in a general sort of way first.
I believe I could look at RF levels on the IF while transmitting,
(using
no longer hear the noise source between dits.
Then either calculate the off times for the dits or measure it on an
oscilloscope.
73,
Don W3FPR
On 1/13/2019 2:07 PM, Dave Cole (NK7Z) wrote:
Hi again Scott,
Thank you for your answer, but I am not being clear.
Not during break in, just sitting
Contest
ARRL Technical Specialist
ARRL Volunteer Examiner
ARRL OOC for Oregon
On 1/13/19 10:25 AM, K9MA wrote:
On 1/13/2019 12:10, Dave Cole (NK7Z) wrote:
Is it faster than .0001 ms?
Certainly not. I'm not sure whether it is recovery time or latency, but
in full break-in mode, you hear nothing
menu
parameter.
Fast is very quick - just watch the S-meter to get some visual indication.
73,
Don W3FPR
On 1/13/2019 11:49 AM, Dave Cole (NK7Z) wrote:
Hello,
Anyone able to answer this question please?
In the presence of a strong signal, say -75 db, (or around S9), once
that signal ceases, how
DCY menu
parameter.
Fast is very quick - just watch the S-meter to get some visual indication.
73,
Don W3FPR
On 1/13/2019 11:49 AM, Dave Cole (NK7Z) wrote:
Hello,
Anyone able to answer this question please?
In the presence of a strong signal, say -75 db, (or around S9), once
that signal
Hello,
Anyone able to answer this question please?
In the presence of a strong signal, say -75 db, (or around S9), once
that signal ceases, how long does it take the K3 receiver to return to
normal receive capability again?
--
73s and thanks,
Dave (NK7Z)
https://www.nk7z.net
Award Manager,
The part of the Amazon ad located at:
https://www.amazon.com/Koss-sb45-SB-45-Communication-Stereophones/dp/B00081A2CW
that says:
"Oxygen-free copper voice coils improve signal transmission & conduction
for a clearer & louder sound."
makes me wonder about the rest of the statements on the
Bottom line... We all spent thousands on our setups, why cheap out on a
connector...
73s and thanks,
Dave (NK7Z)
https://www.nk7z.net
Award Manager, 30MDG Grid Contest
ARRL Technical Specialist
ARRL Volunteer Examiner
ARRL OOC for Oregon
On 1/3/19 1:29 PM, Bob McGraw K4TAX wrote:
That's why I
6 in Virgo.
Dave K1WHS
On 1/3/2019 12:25 AM, Dave Cole (NK7Z) wrote:
We now know "what" is falling off, the next question is why is a part
dropping off?
I must have missed that, can someone refresh my memory please?
73s and thanks,
Dave (NK7Z)
https://www.nk7z.net
Award Manager, 30M
We now know "what" is falling off, the next question is why is a part
dropping off?
I must have missed that, can someone refresh my memory please?
73s and thanks,
Dave (NK7Z)
https://www.nk7z.net
Award Manager, 30MDG Grid Contest
ARRL Technical Specialist
ARRL Volunteer Examiner
ARRL OOC for
Hi Bill,
I suspect it is because they are not aware of this... Keep posting it,
it will change minds...
73s and thanks,
Dave (NK7Z)
https://www.nk7z.net
Award Manager, 30MDG Grid Contest
ARRL Technical Specialist
ARRL Volunteer Examiner
ARRL OOC for Oregon
On 1/1/19 3:58 PM, Bill Johnson
Jim,
I sometimes add a "save" subdirectory to a main directory, if something
I want comes in, and I want to be sure it is never deleted, I copy it to
the save folder.
I might look into the auto delete thing I mentioned upthread.
73s and thanks,
Dave (NK7Z/NNR0DC)
https://www.nk7z.net
Award
I would leave the list if it went to a message board, sorting would be
impossible, and given the "random walk" this list allows with regards to
subject, sorting is needed.
73s and thanks,
Dave (NK7Z/NNR0DC)
https://www.nk7z.net
Award Manager, 30MDG Grid Contest
ARRL Technical Specialist
ARRL
Don,
That is exactly how I do it, and how long I take to trim... I believe
you can automate that process using the folder properties... I tend to
stay away from auto trimming, but I think it could be done...
Thunderbird is wonderful... My only carp is that it won't play a sound
based on
I worked in TV where we had one tower, and one antenna, and just
downtilt to worry about...
73s and thanks,
Dave (NK7Z/NNR0DC)
https://www.nk7z.net
Award Manager, 30MDG Grid Contest
ARRL Technical Specialist
ARRL Volunteer Examiner
ARRL OOC for Oregon
On 12/21/18 2:19 PM, Bob McGraw K4TAX
Sorry to see it go, I got a QSL from it...
73s and thanks,
Dave (NK7Z/NNR0DC)
https://www.nk7z.net
Award Manager, 30MDG Grid Contest
ARRL Technical Specialist
ARRL Volunteer Examiner
ARRL OOC for Oregon
On 12/18/18 3:32 PM, Howard Stephenson wrote:
It's QRT
http://www.jrfarc.org/hf-voyager/
Darn, I had to try... I have an AL-1306, nice Amp, but not I suspect as
nice as a KPA-500, or 1500...
73s and thanks,
Dave (NK7Z/NNR0DC)
https://www.nk7z.net
ARRL Technical Specialist
ARRL Volunteer Examiner
ARRL OOC for Oregon
On 12/9/18 7:30 PM, eric norris wrote:
Dear Dave:
I asked my
As a guess, I would say the response of the mic used to derive the phase
canceling audio does not adequately cover the audio noise spectrum of
the 1500 puts out... Thus it can't phase cancel very well...
That or your 1500 is filled with bad magic because it is supposed to be
my KPA-1500 and
That's a pretty cool description of the antenna melting down... :)
73s and thanks,
Dave (NK7Z/NNR0DC)
https://www.nk7z.net
ARRL Technical Specialist
ARRL Volunteer Examiner
ARRL OOC for Oregon
On 12/6/18 10:27 AM, Ken G Kopp wrote:
In Bill Orr's book, there is a particularly vivid description
Check your direct email...
73s and thanks,
Dave (NK7Z/NNR0DC)
https://www.nk7z.net
ARRL Technical Specialist
ARRL Volunteer Examiner
ARRL OOC for Oregon
On 12/6/18 7:12 AM, Frank Krozel wrote:
Anyone have a pdf for the ELECRAFT XG-1?
de KG9H
Your premise would be correct... :)
73s and thanks,
Dave (NK7Z/NNR0DC)
https://www.nk7z.net
ARRL Technical Specialist
ARRL Volunteer Examiner
ARRL OOC for Oregon
On 12/5/18 4:39 PM, Ken G Kopp wrote:
It's my premise that there's nothing actually new in the
antenna world since the '30s …
I have one of the BWD-90 antennas up now, (at 25 feet), and use it for
local contacts on HF daily...
DX is the vertical, soon to be a beam at 55 feet I also use the
BWD-90 for all the WARC bands, save 30, which is the vertical.
I also have a new in the box BWD-90, (copper version, not
Hi,
I was actually very fortunate-- he upgraded from his Collins gear to the
Elecraft K3, then to the new synthesizers. He only got to use his K3
gear for a year or so, then he passed suddenly. His son in law got the
K3, and loves it, so the rig got a good home.
73s and thanks,
Dave
I have put the results of comparing the old synthesizer to the new
synthesizer up on the web page again. They were removed in error a few
months ago...
The page shows a series of P3 graphs showing two K3's about 900 feet
apart, as they both moved from the old synthesizer to the new
Hi,
I have added an informal and unscientific survey asking if you have RFI
at https://www.nk7z.net
Please take it if you have time. It is a single question asking if you
have RFI. It is two posts down on the right side. Sorry for no direct
link to it, it is on the sidebar.
Also, if
Hi Lee,
When I got my K3 I rebuilt my shack from teh ground up, starting with
the ground, with an eye to reduction of RFI. I took a lot of Jim's,
suggestions, and I lost about 2 S units of noise. That process is
detailed here:
https://www.nk7z.net/rebuilding-the-shack/
73s and thanks,
Ted,
Thanks for sharing that info... Bad as it seems... Hopefully it turns
out to be not what happens...
73s and thanks,
Dave (NK7Z/NNR0DC)
https://www.nk7z.net
ARRL Technical Specialist
ARRL Volunteer Examiner
ARRL OOC for Oregon
On 10/9/18 10:37 AM, Dauer, Edward wrote:
For those who do
I had a hearing test a year, or two ago. I looked at the test results
and selected a frequency, looking for good response in both ears. I
then adjusted the K3 beat note to that frequency, which put the
frequency of the beat tone in the sweet spot for my ears... It also in
general got most
Don,
I have some P3 displays of what happens when two stations upgrade to the
new Synthesizers at:
https://www.nk7z.net/
Just select the top blog entry. There are some P3 graphs there showing
just how much improvement the new synthesizers actually add. Two of us
upgraded, and we did it
Mail wrapping cut off the end for you...
73s and thanks,
Dave (NK7Z/NNR0DC)
https://www.nk7z.net
ARRL Technical Specialist
On 08/19/2018 11:08 AM, Clay Autery wrote:
Error 404 on that link...
__
Clay Autery, KY5G
(318) 518-1389
On 19-Aug-18 12:30, Tom Lizak wrote:
This
Hello Stefan,
I remember running into some roadblock in doing this, but I don't
remember what it was now... I initially wanted to connect directly to
the K3 as well. I think it was if you had a P3 SVGA, it worked better.
If you get things running on just the K3 send me the info, and I'll add
Hi,
I am looking for any KNOWN RFI source screen shots from a P3. They will
go into the RFI Snapshots page at:
https://www.nk7z.net/rfi-snapshots/
If you have one or two images of known RFI sources, please send them to
me OFF LIST, with any information you have, and I will include them in
Bill,
Please let me know if you see slow comms between the K3 and otehr
programs. I am seeing that in some cases.
73s and thanks,
Dave (NK7Z/NNR0DC)
https://www.nk7z.net
ARRL Technical Specialist
On 08/10/2018 09:41 AM, Bill wrote:
I have tried and tested everything mentioned and a load
Hi,
I too have had issues with the serial port speed of my K3 as well. My
issues are when using MixW though, not HRD. When I switched from my
Icom 756 PROIII to the K3, (using MixW), I was appalled at the loss in
speed for rig control. I have never fully resolved this issue, and will
be
From Eugene, OR, north of Cannon Beach, I can hear a lot of 6 meter
stations, CA, AZ, NV, CO, WY...
73s and thanks,
Dave (NK7Z/NNR0DC)
https://www.nk7z.net
ARRL Technical Specialist
On 08/02/2018 10:00 AM, Cameron Francey wrote:
Looks like here in Cannon Beach on the currently wet Oregon
Assuming shipping is included, I will take it, what is your PP address
please?
73s and thanks,
Dave (NK7Z/NNR0DC)
https://www.nk7z.net
ARRL Technical Specialist
On 08/01/2018 06:55 PM, Leroy Buller wrote:
For Sale: N-Gen Wide Band Noise Generator
$50.00
PayPal OK
Lee Buller K0WA
and the CP48 USB VS and the CP48 DB9S
So the one I want is the CP48 UHID one?
Just to be sure...
Thanks,
Chuck
c-haw...@illinois.edu
Amateur Radio, KE9UW
From: elecraft-boun...@mailman.qth.net [elecraft-boun...@mailman.qth.net] on
behalf of Dave Cole (NK7Z
Sorry,
Mis read your question, my date connects to the P3, not the K3.
73s and thanks,
Dave (NK7Z/NNR0DC)
https://www.nk7z.net
ARRL Technical Specialist
On 07/29/2018 07:09 AM, Stefan von Baltz, DL1IAO wrote:
Taking the P3 discussion one step further:
Based on the positive experience of other
Here is a complete how to, with software, and macro list:
https://www.nk7z.net/adding-external-keypad-k3/
I will be interested to see if a hub can be implemented.
73s and thanks,
Dave (NK7Z/NNR0DC)
https://www.nk7z.net
ARRL Technical Specialist
On 07/29/2018 07:09 AM, Stefan von Baltz, DL1IAO
I just bought one off of ebay, for around 20 bucks... Go to ebay and
look for mini-circuits. When you find something, Google that part
number and you can discover what it is...
73s and thanks,
Dave (NK7Z/NNR0DC)
https://www.nk7z.net
ARRL Technical Specialist
On 07/26/2018 06:45 PM, John
You are most welcome!
73s and thanks,
Dave (NK7Z/NNR0DC)
https://www.nk7z.net
ARRL Technical Specialist
ARRL Official Observer Coordinator, for Oregon
On 07/21/2018 07:11 AM, Steve Mollman via Elecraft wrote:
Problem solved. Thank you to NK7Z-Dave Cole, who walked me through the correct
Hi Steve,
I can confirm it works on a K3. I'll shoot you my phone via private email.
73s and thanks,
Dave (NK7Z/NNR0DC)
https://www.nk7z.net
ARRL Technical Specialist
ARRL Official Observer Coordinator, for Oregon
On 07/20/2018 09:23 AM, Steve Mollman via Elecraft wrote:
I have been trying to
I run my entire station save the amp off of a hefty UPS. If we lose
power, I break out the Honda generator and that runs the house, and
keeps the UPS charged.
The house is gas, and the only real power eater is the Dryer.
73s and thanks,
Dave (NK7Z/NNR0DC)
https://www.nk7z.net
ARRL Technical
yes... Weak Signal, not low power. The EME boys use 1 KW.
73s and thanks,
Dave
NK7Z
https://www.nk7z.net
On 07/17/2018 07:15 AM, turnbull wrote:
I thought FT8 was a low power mode. Am I wrong? I am not referring to Fox
Hound mode.
73 DOUG EI2CN
Sent from my Samsung Galaxy smartphone.
Joe,
Got a recommendation for one commercially?
73s and thanks,
Dave
NK7Z
https://www.nk7z.net
On 07/17/2018 07:16 AM, Joe Subich, W4TV wrote:
You will need a (hybrid) splitter ... connect the common port of
the splitter to the RX ANT Out jack, connect one output of the
splitter to RX ANT IN
Hello Bob,
Thank you for taking the time to help!
On 07/16/2018 10:20 PM, Bob Wilson, N6TV wrote:
At first I was confused because the phrase "trigger character" does not
appear in the P3 or K3 manuals. I guess you are connecting a USB
keyboard to a P3's USB port (P3SVGA option must be
Hi,
I am working with a friend to assist him in getting his K3S/P3 set up
for macros... I was attempting to input a macro trigger character,
using the Function keys F1-12 as the triggers. F1-F8 work fine as
triggers, it appears that his K3S/P3, both running current software,
does not
Bump...
Hi,
I am working with a friend to assist him in getting his K3S/P3 set up
for macros... I was attempting to input a macro trigger character,
using the Function keys F1-12 as the triggers. F1-F8 work fine as
triggers, it appears that his K3S/P3, both running current software,
does
Hi,
I am working with a friend to assist him in getting his K3S/P3 set up
for macros... I was attempting to input a macro trigger character,
using the Function keys F1-12 as the triggers. F1-F8 work fine as
triggers, it appears that his K3S/P3, both running current software,
does not
1 - 100 of 185 matches
Mail list logo
