I'll finally chime in as well, and AGREE with Jason! We have to get
used to it? I've never seen so many arrogant, whining twits in my
entire life!! Get a hobby! I'm outta here as well.
Greg
ki4mmm
On Dec 7, 2007, at 10:47 AM, Jason Milldrum wrote:
On Dec 7, 2007 7:17 AM, Julian
I am pretty sure that there are a couple of very simple circuits in
W1FB's Design Notebook that specifically use the D104 -
modern_radio as an example.
Greg
KI4MMM
K2 #6100
On Sep 6, 2007, at 1:29 PM, Don Wilhelm wrote:
John,
If your D104 is an older one with the high impedance crystal or
Just curious: with mentions of other upcoming Elecraft products (e.g.,
power amps) in previous posts, is there a chance that Elecraft might
release a General Coverage receiver kit someday? I am wanting
something comparable to the Palstar r30, Icom r-75, etc., but would
much rather build an
I'm guessing that there are a few QRPARCi member here - quick question:
I joined via the Web site ( paid via PayPal) back on July 3, but I
haven't heard a thing. I've sent email to three addresses listed on
the site with regard to membership, but received no replies. Does
anybody know if it
I've searched and Googled all over for this, but can find nothing. I
have both a benchtop frequency counter (from a Hamfest w/ no probe),
and the NorCal FCC-1, and I need a frequency probe for both of them. I
have some RG-174 and BNC connectors.
For the benchtop counter, I presume I connect
In the back of K7SZ's Low Power Communication (ARRL publication) is a
list of QRP calling frequencies. I am guessing that those for CW are
well used, and standardized, but I am curious, as a No-Code General,
whether the QRP SSB frequencies are used as often? I realize I am in a
minority, but
I've just built an XG1, and it is not clear to me how to adjust the
frequency using C6. According to the manual:
the frequency of the XG1 can set to exactly 7040.00 by adjusting C6
with an insulated tuning tool. Otherwise leave C6 set at its
midpoint.
With C6 centered, there is a definite
computer jumpers) on the mic header.
73,
Don W3FPR
Greg Derda wrote:
Hi all,
I am in the process of building K2 #6100 and need to start thinking
about a microphone. I've looked over the Reflector archives, and it
seems that there are lot of little mods needed for a variety of
microphones
My XYL wasn't quite as excited about this as I had hoped, so I've got
to tell someone ;-)
I wired my TenTec 701, and the mic header, last night, and made my
first contacts with K2 #6100. The first, from my QTH in North Georgia,
was using 8w on 10m, to Pennsylvania - the band was up and
Having just finished the build of K2 #6100 with a KSB2 (installed) and
KNB2 (yet to install), I am looking at my next options. I plan to add
a KPA100, KDSP2, and KAT100, and although I am enjoying the build
process, another way to acquire these (at a potential savings) would be
prebuilt.
Not that I have received any negative comments, but I did want to
clarify that my statement was a joke coming from someone who is
overwhelmed with the joy (and labor of love) of the whole Elecraft
experience at this time. We're all lucky to have XYL's who are
supportive of our hobby
Hi all,
I just finished building K2 #6100, and will start my KSB2 tonight. I
am a no-code General, and work primarily SSB QRO, although I look
forward to QRP'ing with my K2. In most cases, for any portable work I
might do, I will most likely carry at least two enclosures: the K2
and some
Thanks to all for all of the great replies so far!!
One more quick question
Is there anything to consider if I were contemplating the purchase of
an already built EC2/KPA100/KAT100 w/ cables? I am thinking that all I
would need to do is install a KIO2 in my K2(?).
Greg
ki4mmm
W1AZ
On Wednesday 02 May 2007 09:24, Greg Derda wrote:
Hi all,
I am in the process of building K2 #6001 and need to start thinking
about a microphone. I've looked over the Reflector archives, and it
seems that there are lot of little mods needed for a variety of
microphones. The simplest
Hi all,
I am in the process of building K2 #6001 and need to start thinking
about a microphone. I've looked over the Reflector archives, and it
seems that there are lot of little mods needed for a variety of
microphones. The simplest solution would be a MH2, but I don't know
that I can
Hi all, this is my first post here, and although I see the concurrent
Looking at Elecraft Kits message, I didn't want to step on that
thread, because my question is a little different.
I've gotten the K2 bug (real bad ;-) and plan to order one in the
coming week. I have some kit building
16 matches
Mail list logo