I've just gotten a like new TenTec Centurion to replace my Heathkit SB-200. I
operate 95% SSB and am a bit perplexed about the connection from the K3 to the
Centurion. Yes, RF from K3 goes to RF In, that I know; the question is does
the Key Out go to the PTT/VOX or Key In. I'm thinking
I installed the KAT3 Internal ATU in my K3 during the blizzard of 2009.
I now have the KANT3 Antenna Input Module that I no longer need.
If anyone needs one, I'll ship it to you - CONUS ONLY - at no charge to you.
73 Merry Christmas,
H Cary, K4TM
LYNCHBURG, VA
K3-100 #3491, K2-100 #4991
The KANT3 is on its way to Rhode Island.
Thanks to all who replied.
73 and Holiday wishes,
H Cary, K4TM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
I have the folowing for sale:
[1] Sunlight Energy Systems AmpKeyer...soft start for an older linear
amplifier. Three bright LED lights let you know there is power to AmpKeyer, if
amp is being keyed, and status of standby/op switch. All connections to from
amp are via RCA type jacks, easily
The AmpKeyer has been sold! Took all of four minutes...amazing!
73,
H, K4TM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
Upgraded my K3 Utility and downloaded firmware revision 3.63 last night.
Using Internet Explorer and Windows XP, it was a flawless and EASY process.
73, H Cary, K4TM
Lynchburg, VA
K3-100 #3449 and K2-100 #4991
__
Elecraft mailing list
Awhile ago, someone posted a YouTube link to a YL operating CW on a Vibroplex.
I thought I saved the link and have tried searching YouTube with no luck. If
anyone knows the link, I'd appreciate it if you'd forward it.
73, Cary, K4TM
K3-100 #3448
Initial resistance and power on test for K3 #3448 went with out a hitch.
73,
Cary, K4TM
Lynchburg, Va
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
Subject: K3-100 arrived
K3-100 #3448 arrived safely in Lynchburg, VA today.
I have rectified the biggest ham radio mistake I ever made - selling K3-100
#0176!
73, Cary, K4TM
K2-100 #4991, K3-100 #3448
__
Elecraft mailing list
Home:
K2 #4991 has a new home. I missed #5266 and took Tom up on his sales offer.
Glad to be back in the Elecraft family! 73, Cary, K4TM K2-4991
- Original Message -
From: elecraft-boun...@mailman.qth.net elecraft-boun...@mailman.qth.net
To: Elecraft@mailman.qth.net Elecraft@mailman.qth.net
The KBPF-3 has been sold, thanks for all who expressed interest - 15 of you at
last count.
73,
Cary, K4TM
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub,
FOR SALE: KBPF-3 General Coverage Receiver module for K3. New from Aptos, it
is $129.95; yours for $95 and I ship CONUS. Contact off list, please: [EMAIL
PROTECTED]
73,
Cary, K4TM
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You
K3-100 #178 has found a new home north of the Mason Dixon line, hope the harsh
winters won't be too much of a shock to her system!
Thanks for the many who responded.
73,
Cary, K4TM
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must
From: H. Cary III
Sent: Thursday, July 17, 2008 9:54 AM
To: 'elecraft@mailman.qth.net'
Cc: H. Cary III
Subject: K3-100 for Sale
FOR SALE: K3-100, #178 with KAT3 Internal ATU and standard 5-pole 2.7 kHz SSB
and KFL3A-500 Hz CW filter, plus MH2 Hand microphone.
On air maybe 6 hours since early
I had the same problem with K3-100 #178...problem was the frequency I'd entered
for the crystal filter...I used plus and it was supposed to be minus...once
I corrected that it was on the money.
Cary, K4TM
___
Elecraft mailing list
Post to:
The K2-100 #5266 and the KAT-100 auto antenna tuner have been sold; amazingly
enough to area hams - no shipping!
73,
Cary, K4TM
LYNCHBURG VA
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
From: H. Cary, K4TM
Sent: Tuesday, March 25, 2008 2:07 PM
To: 'elecraft@mailman.qth.net'
Subject: K2-100 + KAT-100 for sale
K2-100, #5266 FOR SALE. Toroids by Mychael, aligned by W3FPR, includes: KSB-2
SSB Adapter, KDSP2 internal DSP filter/real time clock, KNB2 noise blanker,
K60XV 60-Meter
Download of latest K3 utility software went flawlessly.
Please look for me March 12-18 as PJ7/K4TM or FS/K4TM (12-14) and then
VP2V/K4TM the rest of the time.
After sailing, approximately 2100 GMT, I'll have a few hours to operate...try
14.210 or 14.255. I'll try to get on 40 cw later in the
I need reflector help!
I love my K3 but it seems to be smarter than I am. Earlier this week I was
working PSK-31 on 10 and 15 meters. Now with the contest this weekend, I want
to work USB on those bands but the K3 is in DATA Mode and I can't figure out
how to exit and get USB back on 15 and
Don-
I knew it was simple but it eluded me.
Thanks, now in USB!
73,
H, K4TM
-Original Message-
From: Don Wilhelm [mailto:[EMAIL PROTECTED]
Sent: Saturday, March 01, 2008 10:35 AM
To: H. Cary III
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Help! K3
I had the same problem. I had a + offset on FL1, instead of a -. Once the
correct offset was inputted, the alignment worked smooth as silk.
GL 73,
Cary, K4TM
K3-100 #178
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a
FOR SALE: K2-100 #5266 with: KSB2 (SSB Adapter), KDSP2 (Internal DSP
Filter/Real Time Clock), KNB2 (Noise Blanker), K60XV (60-Meter
Transverter/Adapter), K160RX (160-Meter module). Yes, it's loaded! Toroids by
Mychael (AA3WF), aligned by Don (W3FPR); lives in non-smoking home.
All manuals,
I just downloaded the latest Firmware update MCU v1.65 and DSP v1.52
It was a piece of cake, literally! Took four minutes max, more like 3 and a
half.
The screen showed a DSP 2 version available but it did not download.
Did I do something wrong?
73,
Cary, K4TM
K3-100 #178
From: H. Cary III
Sent: Thursday, January 10, 2008 9:19 AM
To: 'elecraft@mailman.qth.net'
Subject: For Sale: Tilt Stand for K2 or EC2 Enclosure
I have an ETS15 matching tilt stand (measures 2.5) for K2 or KAT100 or EC2
Enclosure; never used, in original package. New it is $14; I will sell
The tilt stand has been sold.
Cary, K4TM
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Is anyone using their K3 on SSTV? If so, I'd like to contact you off list with
a few questions.
Tnx 73,
Cary, K4TM
K3-100 #0178
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info
K3-100's #176 (W0SZ) and #178 (K4TM) stumbled upon one another at 14.213
yesterday afternoon. Steve and I spent the time raving about our K3's and how
much we have yet to figure out!
It is a Happy New Year!
73,
Cary, K4TM
K2-100 #5266
K3-100 #178
I love my K2 and K3!
The reference oscillator is now aligned with WWV - thanks to N0SS, W3FPR,
DJ7MGQ, and AD7FZ for responding so quickly - Tom talked me through it
thankfully.
I just did the Transmitter Gain calibration and get an error message - ERR TXG
- on all bands 160-6. So after passing all the
HNY,
Cary
-Original Message-
From: Greg [mailto:[EMAIL PROTECTED]
Sent: Tuesday, January 01, 2008 7:19 PM
To: H. Cary III
Subject: RE: [Elecraft] ERR TXG Message es tnx
I take it you mean the 2.7 kHz filter? There is no 2.5.
You have the Filter Offset set as a negative number
I hesitate to put this question on the reflector but support at Elecraft is
closed until Wednesday, Jan. 2 - understandable, they DO deserve some time off!
The assembly of K3-100 (#178) is complete and went very smoothly...all tests
checked out flawlessly, the filters are properly aligned per
Long wire being hit by fan blades...quiet as a church mouse now!
Now to figure out how to work it all..
A Happy New Year to all.
73,
Cary, K4TM
K3-100 #0178
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post
K3-100 #178 went together flawlessly, well almost, but it was smooth. Was
missing two standoffs and two screws for the fan assembly on the KPA-100.
When I did the first fan check, the relay or relays clicked but only one
operated very quietly (short lead) ...disconnected it as instructed,
K3-100 arrived at 2:50pm on December 28th...now for the inventory, then the fun
begins!
(Ordered May 2nd; shipped Dec. 20th)
I may not need the assembly manual as I've read it so many times I think I have
it memorized.
A belated but Merry Christmas present!
Happy New Year to all.
73,
H Cary,
K3-100 #178 (ordered May 2nd) departed Aptos yesterday en route to Virginia;
UPS anticipates a 12/28 arrival...not quite in time for Christmas but it will
make for a Happy New Year!
Best Holiday wishes to all of you!
73,
H Cary, K4TM
Lynchburg, VA
K2-100 #5266
I love my K2!
K3-100 #178
I'm going to be hamming and sailing in the Caribbean in March (St. Maarten and
British Virgin Islands) and will take either my K2 or K3 with me. I logged by
hand the last trip and don't want to do that again. I'm not wild about taking
a laptop either. Has anyone had any luck with using
I'm confused. I ordered my K3 on May 2nd and I'm reading on this reflector
that an order on May 4th has been shipped? What's going on?
My e-mail query to Lisa last Monday has gone unanswered - most unusual - and
the shipping status note hasn't been updated for some time.
Hopefully the Elecraft
I certainly did...mea culpa.
Cary, K4TM
-Original Message-
From: Mark Volstad [mailto:[EMAIL PROTECTED]
Sent: Saturday, November 24, 2007 8:45 AM
To: H. Cary III
Subject: [Elecraft] K3 status
Hi Cary,
It appears that you missed the follow-up posting (see below) from the
gentleman
Dave-
As a fellow K3 recipient to be, ordered 5/2, your missive of despair
struck gold with this ham!
I am A+ but am in no shape to offer a transfusion!
73,
Cary, K4TM
___
Elecraft mailing list
Post to:
Dave,
TenTec 701 works great and is very reasonably priced, I purchased mine from
TenTec for $28 a year or so ago and love it.
73,
Cary, K4TM
K2-100 #5266
I love my K2!
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED]
Sent: Tuesday,
I have a K2-100 that I want to hook up to my recently refurbished Heathkit
SB-200 linear amplifier. Has anyone already done this and, if so, be willing to
share the hook up configuration. I also use the KAT-100 auto antenna tuner but
may have to by-pass it when using the linear. Any help will
Subject: Re: [Elecraft] K2 microphone advice
Mike, N4JX
When you get the microphone. Remove the strain relief connector by removing
the two screws and then remove the very small phillips head screw in the side
of the connector and twist the shell a 1/4 turn conterclockwise and slip the
Greg-
Don's advice is excellent. I wired my mic connector as he suggests
and use a Ten Tec 701 (Electret element is built in), configured with an 8-pin
plug. Excellent audio reports and the price is right: $28 for the mic!
Good luck and keep us posted!
73,
Fred and Eric-
I went through this a few months ago and got excellent
advice from this reflector. TenTec sells a hand mic for $28 (the bias
resistor is built in so you don't have to add it to the back of the
front panel). I bought it and am using it and getting excellent audio
Does anyone know a source for ordering replacement tips for a Solomon SL-10
soldering station on the east coast or mid-west? I know Circuit Specialists
has them but it takes awhile to get them from Arizona to Virginia!
I'm about to start on the KPA-100.
Thanks and 73,
Cary, K4TM
K2 #5266
K2 #5266 is up and running and that would not have been possible without the
support from Elecraft - Scott and Gary are so responsive to questions and
helping me resolve problems I somehow managed to create. Don, W3FPR, and Tom,
N0SS, also helped alot along the way. Fortunately for all of
Problem solved! Turned D19 in secondary menu to on' and all bands are now
within the spec'd VCO range. My thanks to Don, W3FPR, for suggesting this!!
73,
Cary, K4TM K2 #5266
From: H. Cary III
Sent: Sat 3/25/2006 4:36 PM
To: elecraft@mailman.qth.net
Cc
K2 #5266 was playing beautifully on cw and I aligned the filters last
night for SSB, had no problems with that alignment. When I finished, I
found my K2 deaf on ALL bands (it transmits just fine!)...The RANT is
OFF, I have good tone with the SPOT feature (yes, I went through the
troubleshooting
Thanks to Don, W3FPR, and Tom, N0SS, and Gary in Elecraft Support, plus Harvey,
KN6VP, my problem is solved (it wasn't the D19 menu item though!) and
everything aligns as advertised! This e-mail eflector is a lifesaver!!
Thanks fellas!!
73,
Cary, K4TM
K2 #5266
From: H. Cary III
Sent: Fri 2/17/2006 11:20 PM
To: Tom Hammond
Cc: [EMAIL PROTECTED]
Subject: RE: K4TM K-2 deaf...no wonde!
Tom-
I just substituted a 5pF NPO from W4QE's junk box of parts and my K-2 now
has ears...thanks again for all your help...tomorrow
Harvey-
I used toroids wound by Mychael, the toroid guy, and he
does excellent work. K2 #5266 aligned per spec's and I'm glad he enjoys
what I find the most onerous part of kit building! I highly recommend
him! His service is fast, too!
73,
Cary, K4TM
I need some help/advice. I have completed K2 #5266 and want to use it on SSB,
as well as cw. The MH2 hand mike offered by Elecraft/Heil is no longer
available and I don't want to use a head mounted mike with earphones which is
the only other alternative through Elecraft/Heil.
I admit I'm
K-2 #5266 is up and running per specs...many thanks to Tom, N0SS for responding
to my cry for help - his 'Cheap and Dirty Signal Tracing' article really saved
the day for me. ARRL DX contest is on and first contacts with 10 watts were a
PJ2, F2, and DL4..
Thanks to this reflector I've
K-2 #5266 is coming along nicely, everything checks out in alignment until the
40-meter Band Pass Filter Alignment on page 64it's deaf on 20-40-80
meters (but the 3Y0X pileup on 30 meters is LOUD)
* RF Gain is at max
*have 3.90 volts on U2, pin 5
*by-pass jumpers are
Subject: K-2 #5266 A-OK
Part II Alignment and Test for K-2 #5266 went A-OK...all within specs...that
sure is a good feeling! Taking it slow and easy but continue to be impressed
with the top quality of this product!
H Cary, K4TM
Lynchburg, Va
___
Part II Alignment and Test for K-2 #5266 went A-OK...all within specs...that
sure is a good feeling! Taking it slow and easy but continue to be impressed
with the top quality of this product!
H Cary, K4TM
Lynchburg, Va
___
Elecraft mailing list
Post
Ron,
I bought a soldering station from Circuit Specialists in AZ and, as the
order was more than $50, I got a FREE Digital Multi-Meter - it does a
good job and I get the same readings I do from my BK 2707A (cost me
about $80 a year ago from Mouser but it reads capacitance, and
transistor gain
56 matches
Mail list logo