I have a macro which, while configuring my K3S for FT8 operation, sets BW
to 4.0 kHz.the 6.0 kHz roofing filter is (apparently) automatically
selected and I do not actually realize 4-ish kHz BW until I manually select
the 13 kHz roofing filter.
It seems from the Programmer's reference that
*What do you mean by “voice isn’t working”? That sounds like a problem for
your doctor.*
A little kindness and grace would go a long way towards keeping the
reflector civil.
Just sayin'
John
On Mon, Mar 26, 2018 at 9:30 AM, Nr4c wrote:
> What do you mean by “voice
I wonder if I could sell one of my children and buy one?
Nah
Oh Well
On Sun, Jan 14, 2018 at 3:32 PM, Bill Johnson wrote:
> Thank you for the wonderful review. I am drooling.
>
> 73,
> Bill
> K9YEQ
>
> -Original Message-
> From: elecraft-boun...@mailman.qth.net
Wondering if anyone has already assembled a macro for the K3 to place the
K3 into KXV3B "Test" mode and whatever other settings required to switch
the K3 for operation at 630 meterssand back again to "Normal" mode?
Thanks in advance
John, N6AX
Been in discussions with Elecraft regarding my K3S (110900 and its
performance at 472-is kHz.
My measurements surprised me a bit...I was expecting a bit more output but
my particular K3S will output barely 285 uW (when power set to nominal 1.0
mw) and a max of about .45 mw with power control set
I figured out my error
Please disregard
JK
On Sat, Dec 17, 2016 at 10:15 PM, John Klewer <n6axj...@gmail.com> wrote:
> Learning how to do the macro thing with my K3Sperhaps it is just too
> late at night but I cannot seem to find a reference to the command to set
>
Learning how to do the macro thing with my K3Sperhaps it is just too
late at night but I cannot seem to find a reference to the command to set
"Line In" level
Found Mic Gain but no reference to Line in setting in Data A mode
Any help, please?
Thanks
John
OKI have read several archived email threads regarding this issue some
other hams are having without finding a resolution to my problem...please
help!
Running a new K3S with a Mac running WSJT-x for JT-65 mode
Transceiver is connected per the manual and I am able to control the K3
with my
Anyone have the connections in the CBLP3Y cable for the P# PC RS232 plug to
RJ45 pins 1, 3 and 6 (they are not identified in the K3S manual?
Thanks
John, N6AX
__
Elecraft mailing list
Home:
Shipped in USA for $85
Works perfectly and includes cable and BNC adapters as new.
PayPal OK
John
Sent from my iPhone
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Excellent condition PR6 preamp for sale.
Works great, cosmetically excellent, includes BNC adapters as new
Will ship in CONUS for $85.00
Paypal OK to this email address
Thanks
John, N6AX
__
Elecraft mailing list
Home:
Excellent condition PR6 preamp for sale.
Works great, cosmetically excellent, includes BNC adapters as new
Will ship in CONUS for $85.00
Paypal OK to this email address
Thanks
John, N6AX
On Tue, Nov 17, 2015 at 2:44 PM, John Klewer <n6axj...@gmail.com> wrote:
> Excellent cond
6 Meter low noise amplifier, model PR-6, with all original hardware and
tested, working properly.
$80.00 shipped USA
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Tested working preamp in excellent condition with all originally-supplied
accessories.
Will ship in USA for $80.00
Please contact off list
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Tested working preamp in excellent condition with all originally-supplied
accessories.
Will ship in USA for $80.00
Please contact off list
John, N6AX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Just got around to measuring RX sensitivity on my KX3 and, boy, does it
drop off severely (about -30 dB) at 1 MHzplaying with the ATU settings
as others have mentioned here doesn't help
John
On Fri, Aug 14, 2015 at 10:30 AM, Mark, KE6BB via Elecraft
elecraft@mailman.qth.net wrote:
Robert,
I likely just missed it but wondered if anyone knows how to enable transmit
on my new-synthesizer-equipped K3 in the 630 Meter band.
My transceiver indicates BND END when attempting transmit.
It may be that the firmware has not yet been modified as the band has not
yet been approved by the
For sale Elecraft PR-6 6 meter low noise preamplifier in excellent
condition.
Includes everything supplied by Elecraft when purchased new.
Excellent low noise figure performance
Photograph available on request...please reply off list
Price is $100 shipped CONUS
Any information on possible future availability of a blank housing,
P3-size, in the vein of an EC2?
Would like to build a switching power supply into one to match the K-line
Any information is appreciated
John
__
Elecraft mailing list
Decided to clear off the desk space taken by the additional monitor so am
offering for sale my P3SVGA plug in external SVGA adapter.loved the
big screen but just not enough room on my operating desk.
P3SSVGA adapter retails for $279.00, this one includes latest firmware
download and
KX1 has been sold
Thanks to all who responded
John
n...@speakeasy.net wrote:
I have a complete unbuilt KX-1 kit with unbuilt internal auto tuner kit for
sale.
New prices are $419.90this one is $340.00 with shipping included in CONUS
Please write if interested
Thanks for reading
Assembled and working fine.
Kit price is $239.95
Ship for $210.00 (CONUS)
Thanks
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
I have a K2 S/N 26XX, for sale.
Cosmetics great, functions great, this is a CW only basic unit with only the 160
Meter/RX module installed.
Includes OP manual and Mini-Manual s well as power cable.
Board has B revisions
Shipped CONUS for $560.00
I have the following K2 modules available for sale:
KNB2 $40 shipped
KSB2 $95 shipped
KAT2 $140 shipped
All are completely assembled, tested, working ready to install including
documentation
Please reply off list
John
__
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
On the other end of the price spectrum, way above the speculated-upon
price of the KPA500, are the Tokyo Hy-Power amps (the 1500 model has
~2.5 dB more power but otherwise similar) for around $3500 and the SPE
Expert 1K-FA listing at around $3900 (auto tuner built-in).
Seems to me that the
Is there any prediction about the availability of the MAC version P3
firmware update utility?
John
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
I experienced my very first vapor-lock (MCU LD freeze-up) when doing the
V4.05 download with the P3 connected in the RS-232 path..have done
many, many firmware updates since receiving my K3 (S.N 567) with no
glitches at all...is this a coincidence?
John, N6AX
I received my P3 and did the assembly on short order...hooked it up
and am, so far, very impressed!
Thanks to the entire Elecraft crew for another outstanding product which
exceeds expectations
N6AX
__
Elecraft mailing list
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
Nevermind
JK
n...@speakeasy.net wrote:
Setting up my K3 for PSK 31 I noticed that there is a 12 Hz amplitude
modulation
with no connections made to the radio's audio inputs.
Having never used PSK-31 I don't know enough to even be dangerous butIs
this
normal?
Any advice is
Perhaps I'm in the minority hereusing some nice quality hi-fi
bookshelf speakers.I love the way the K3 sounds.
YMMV
John, N6AX
Mike Scott wrote:
Audio is notorious for having a very subjective vocabulary, and this may
make it hard to understand what is meant. I hear terms
Sale pending
John Klewer wrote:
For sale is my as new E-MU 0202, LP-PAN, original boxes, interconnect
cables,
etc, etc, etc.
The LP-PAN was factory assembled.
$275.00 plus shipping in lower 48...will ship to Europe for additional
shipping cost.
Paypal OK with you covering their 3% fee
For sale is my as new E-MU 0202, LP-PAN, original boxes, interconnect cables,
etc, etc, etc.
The LP-PAN was factory assembled.
$300.00 delivered in lower 48...will ship to Europe for additional shipping
cost.
Paypal OK with you covering their 3% fee.
For sale is my as new E-MU 0202, LP-PAN, original boxes, interconnect
cables,
etc, etc, etc.
The LP-PAN was factory assembled.
$275.00 plus shipping in lower 48...will ship to Europe for additional
shipping cost.
Paypal OK with you covering their 3% fee.
[EMAIL PROTECTED] wrote:
I know I have seen the answer to my question here somewhere...just can't find it
right now.
Using my K3 in diversity receive for the first time and wondered about reverse
power into the other antennathe radio has some protection...are there any
other caveats?
Includes full hardware setup.
1. E-MU0202 USB external soundcard
2. Factory assembled LP-Pan
3. Connecting USB, audio, IF, and power cables.
You download the free PowerSDR and Ham Radio Deluxe. This sound card is the
LP-Pan suggested full feature card with better than 160 khz display,
allows
Interesting to note that in QST magazine's review of a super whizbang,
thermonuclear commercial transceiver from Rohde and Schwartz in the
October issue of QST, the receiver they referenced its intermod
performance to is...the K3.
NICE!
John, N6AX
K3 567
*Just removed from my K3 because of a change in my filter lineup.
KFL3A-1.0K 1 kHz, 8-pole roofing filter
This filter was installed a few months agoin as new condition.
Elecraft wants $125.95 plus shipping and tax (if applicable to you)
This one is $110.00 delivered lower 48.
I will
Note that I installed this preamplifier in the RX IN/OUT path on the K3
rear panel
To enhance the 6 meter performance of my K3 I built the U310
preamplifier as described on N6CA's website:
http://www.ham-radio.com/n6ca/50MHz/50appnotes/U310.html
Tuned up on an HP8970A noise figure meter
To enhance the 6 meter performance of my K3 I built the U310
preamplifier as described on N6CA's website:
http://www.ham-radio.com/n6ca/50MHz/50appnotes/U310.html
Tuned up on an HP8970A noise figure meter it gives 11.2 dB gain and
NF=1.3 dB.
The receiver's performance on weak signals was
OKdoes anyone else have this same operational quirk?
Using latest beta firmware (same problem existed using the latest
released FW as well) I have a XV-144 connected to my K3...set output
power on 6 meters set to about 60 watts (actual value is irrelevant),
switch to 144 MHz, switch back
5 hours passes and the price goes up a hundred bucks...better jump
quick, guys!
Warren wrote:
K3/10 with KBPF3 General Coverage RX Filter Module, 2.7khz filter in new
condition with latest firmware, power cord, manuals, shipped Continental United
States only prepaid.
$1750.
thanks
If you can find one, the Clifton Laboratories Z90 or Z91 is a pretty
nice standalone unit as well.
John, N6AX
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change,
Anyone with a K3, calibrated signal generator and a spectrum
analyzerI would appreciate measurements on several K3s.
Specifically, with attenuator and preamplifier OFF.on 20 Meters,
what is the signal gain/loss between Antenna input and IF output ports?
Thanks in advance.
John, N6AX
Has anyone measured the amplitude of the IF output port for a given
signal input?
I think I may have a problem but would like to know what the signal
profile looks like...input to IF output port.
Thanks in advance
John, N6AX
___
Elecraft mailing
Gotta love capitalism.
[EMAIL PROTECTED] wrote:
He is buying extras and reselling at a profit while the rest of us wait for
delivery of ours
Jim K4JAF
-- Original message from Kevin Cozens [EMAIL PROTECTED]: --
Don Rasmussen wrote:
I have a not yet installed 400 Hz filter for my K3 and would rather,
with the particular filter complement I have, install a 250 Hz 8-pole.
If you are interested in a trade please email off list
Thanks
John, N6AX
K3 567
Robert Friess wrote:
default
Thanks to all for the good info.
John, N6AX
K3 #567
Bill Tippett wrote:
N6AX:
Just assembling my K3 and perhaps I missed an assembly step because,
though I ordered the KXV3, KIO3 and KAT3, I hve no aux antenna port
below the two antenna connectors...what did I miss?
KK7P:
Not a thing. It
Just assembling my K3 and perhaps I missed an assembly step because,
though I ordered the KXV3, KIO3 and KAT3, I hve no aux antenna port
below the two antenna connectors...what did I miss?
John, N6AX
Lyle Johnson wrote:
Do I also have to order the KXV3 in order to have
an aux receive
K3 # 567
Ordered August 3
Now for the fun
John, N6AX
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
Got my Katiegram today, ordered August 3
YE!
John, N6AX
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
AMEN!
Tom AK2B wrote:
Hi Steve,
The Believers sounds more like a 60's rock group than a description of
Elecraft customers. From my perspective, working for a small business, you
become well acquainted with your customers over a period of time. A lot of
these customers come back because they
And not an ESD wrist strap visible anywhere.
[EMAIL PROTECTED] wrote:
Has anyone seen these pics yet:
_http://www.elecraft.com/K3/pics/_ (http://www.elecraft.com/K3/pics/)
Looks like Elecraft has at least 3 Techs working on getting those units out!
I wouldn't mind doing that
if
Hello, test 123..
This is a test for circuit adjustment purposes from a station of the
American telephone and Telegraph Company...
Not really
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the
As I am sure you all know...all the while that the good folks at
Elecraft have been shipping out these first 100 K3s, their manufacturing
operation (in house and outside assemblers) have been cranking out
boards and modules and filters, etc. It is decidedly NOT a serial
operation until the
57 matches
Mail list logo