Thanks to Rick, N1RM, and his expertise in tracing circuits, my K3 is back
in FB working order. We found that a switching diode on the bottom
(fortunately) of the RF board had failed. (I think it was D25.). It was a
low cost fix, and with Rick's surface mount skills a replacement was soon
installed
ailure caused loss of tx only
> due to shorted switching voltage. Both were on the RefOsc board.
>
>
>
> Sent from my iPhone
>
> > On 22 Jan 2020, at 02:42, John Unger wrote:
> >
> > Wow, guys, thank you all for the suggestions of things to check, but
> still
Wow, guys, thank you all for the suggestions of things to check, but still
no joy...
Here's your suggestions that I have checked:
voltage - 13.6
RX ANT not on
I uploaded a couple of old config files - not change
Turning RF GAIN fully CCW puts SWR meter at full scale
My other K3 hears FB on all the
A few days ago one of my K3's appeared to have suddenly gone almost deaf.
Here are some of the symptoms and observations:
- Rig's S meter shows very low or no background noise (strong stations can
still be heard weakly).
- P3 shows http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mai
Test.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list
Sorry if this is a duplicate of a post that I tried to make a few days ago
through nabble. It wasn't clear that I was able to post the message
successfully that way.
I learned about these headphones from earlier enthusiastic posts on the
Elecraft reflector. The isolation and fidelity they deliv
I am in the process of connecting my K3 to a Model 419 ICE bandpass filter.
Does anyone have a circuit or schematic of how they interfaced this filter
with the outputs on the ACC port on the K3, or do I need a full-blown
solution like the KRC2 band decoder?
tnx es 73 - John, W4AU
I operated in the CW SS this past weekend as an unassisted, SO2R station. I
had my K3 as the main radio and was using it for running most of the time;
I used my TenTec Orion as the S&P second radio. It gave me an excellent
opportunity to compare the two rigs under fire.
The biggest thing I no
Hi Don -
I believe you are wrong here in stating that the delay of RF output after
keying is fixed in the K3. Here is an excerpt of the notes from Wayne for
the MCU 1.87, DSP 1.69 firmware update:
...
"* VARIABLE AMP KEYING DELAY: Added CONFIG:TX DLY menu entry, which sets
the time from KE
der: set KDVR3 to NOR.
KPA3 amplifier module: set the PA MODE
menu entry to PA NOR. See menu entry
listings for information on other settings.
====
vy 73 de toby
John Unger wrote:
Thanks for the reminder to put K3 in the Subject: line
I
Thanks for the reminder to put K3 in the Subject: line
I just installed the KPA module and attempted to do the High Power Gain
Calibration procedure at 50 Watts. But all that happens is that I get 0
Watts indicated and a "ERR TXG" message. Any idea what is going on? Manual
says to refer to
I just installed the KPA module and attempted to do the High Power Gain
Calibration procedure at 50 Watts. But all that happens is that I get 0
Watts indicated and a "ERR TXG" message. Any idea what is going on? Manual
says to refer to a mysterious "Service Manual".
Everything works FB up to 1
I'm still waiting for my K3, but...
I guess from the fact that you went through these gyrations means that one
can't simply set the roofing filtering selection on "auto" and dial in a
DSP width of 2700 Hz., e.g., or whatever with a K3 and have the 2700 Hz.
SSB filter as the roofing filter; lik
What I have done with all my non-rig-specific microphones (2) and Heil
headset/mics (3) is to install a simple stereo 1/4" jack on them. Then I
have short pigtail adapters with the rig-correct mic plug on one end and a
1/4" stereo plug on the other. Makes it easy for going from one rig to
anoth
Toby -
All that I have to say is ausgezeichnet! Thanks to you and your friends for
doing all the hard work for the original report and especially for the
English translation. I was having a difficult time reading the techniche
Deutsch... :-)
73 - John, W4AU
At 05:34 AM 1/30/2008, you wrot
15 matches
Mail list logo