on each (a few hundred ohms and a microfarad or
more, to block the DC), and then ties them together to a mono plug. That should
work and keep everyone (the computer and the KX2) happy.
Rich KE1B
__
Elecraft mailing list
Home: http://mailman.
won’t be
able to work many NA with only QRP and a Buddistick, but I’ll see what I can do.
Rich KE1B
> On Sep 14, 2018, at 8:58 AM, Jack Brindle wrote:
>
> Hey Rich!
>
> What make of computer? Is the port selected for input? If a Mac, the normal
> selection would be the i
adapter boxes,
USB hubs, external codecs, etc. for very-portable operation.
Rich KE1B
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
from the computer to the radio.
In the Configurer, I have selected the K3S Codec as the output device for the
radio.
I have tried lots of variations in ports and AFSK/FSK and such, to no avail.
What should I be checking?
Rich KE1B
load. I’ll try this today, but
of course with intermittent problems it may or may not recur.
-Rich KE1B
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:E
before?
Rich KE1B
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support
Never mind. I figgered it out on my own. We’ll test it out in All-Asia SSB this
weekend.
Rich KE1B
> I can’t seem to find it.
>
> I’m trying to configure N1MM Logger+ with my K3S. Do I need to download a
> driver for the internal USB chip? I have a number of devices on my machine
port? (The codec is easy; it’s just
there and works.)
Any suggestions on port parameters for N1MM+ and the K3S?
(FWIW, I’m a long-time N1MM/N1MM+ user; it’s just the K3S that is causing me
grief.)
Feel free to answer off-line if this has been beaten to death before.
Rich KE1B
nt to radio"
> for RTTY. If this is set to RTTY, N1MM+ will put the K3S into FSK D mode,
> which will result in an unmodulated carrier if there is nothing connected to
> the FSK pin on the AUX connector on the K3S. To use AFSK A, change the "Mode
> sent to radio"
On Aug 11, 2015, at 6:17 PM, Joe Subich, W4TV wrote:
>
> On 8/11/2015 8:56 PM, KE1B wrote:
>>
>> Is there any way for the K3S to take its audio from the USB codec
>> rather than the Line-in or Mic-in?
>
> Exactly the same configuration as AFSK with audio via
to
get is a one-cable (USB) solution for all modes. (CW works fine with RTS/DTR
over USB.)
Rich KE1B
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
11 matches
Mail list logo