Thanks for the input I'm using the suggested iMic which does have a line
input and a mic input. I'm beginning to believe that it really is that the
radio is not working correctly. I'm going to reach out elecraft directly to
see what I can do without sending the radio to them for the fact that I'm
I found the issue, I had dual RX enabled and when you cross the band for the
2nd VFO it goes into stereo one receive in each ear. I've turned that off
and have full stereo in my earphones again with CW.
--
Sent from: http://elecraft.365791.n2.nabble.com/
I will report back after trying some of the I/Q based softwares out there,
however I did try iSDR which is supposed to work with USB sound card, it
didn't work. I'll try the windows based program tomorrow and report back.
--
Sent from: http://elecraft.365791.n2.nabble.com/
I tried with iSDR which is made for iOS, sound card is working, RX I/Q is not
from my radio.
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
r any help that you can provide.
Thanks,
Kevin F.
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailt
Thanks ALL for the help.
I'm still getting zero audio out of RX I/Q and want to make sure that I have
done my due diligence trying to figure out the issue. I'll have some
adapters on their way later today for the 1/16th inch jack to put headphones
on it that way I don't have to trust that my
I did check that the RX I/Q was enabled and still hear nothing, on my
computer, when plugged in to the RX I/Q port. I'm ordering a set of adapters
so that I can put my headphones on the radio directly to see what I hear
then. Thanks all for trying to help...
I still wonder if I should hear
Thanks for the prompt reply, I guess the question that I would like to answer
is, if I were to plug in to both sides of the RX I/Q port should I hear
anything at all? If I shouldn't then great, if I should then I'm going to
need to figure out what's going on with my radio such that I can't heard
Does anyone know how to test the RX I/Q signal is coming out of the radio
correctly. I used the elecraft cables trying to listen to the signal using
my computer and didn't hear anything. I would like to be able to use this
output in fldigi for the waterfall. And still be able to listen to CW
9 matches
Mail list logo