with an
error message to the effect that the device is non-functional. I've tried
un-installing and re-installing the drivers from both the supplied CD-ROM,
the Elecraft download site, and the Prolific site, all with no success.
What in the world am I doing wrong
Mark KN7T
--
View this message
Call: KN7T
S/P/C = 47
QSO Points = 401
Total Score = 18,847
Total op time = 4 hours
Equipment: K3 S/N 1371, Hexbeam @ 40 feet, double bazooka @ 40 feet
--
View this message in context:
http://n2.nabble.com/EQP-2009-tp2482294p2482294.html
Sent from the [K3] mailing list archive at Nabble.com.
I am an ACLog user and my K3 works just fine with that program. I suspect
that the baud rate is mismatched and that is causing your problem. I have
mine set to run 38.4K baud and the polling rate is set at 100 mS.
--
View this message in context:
I was wondering the same thing, how do you completely erase M1-M4 if needed?
--
View this message in context:
http://n2.nabble.com/K3-KDVR-manual-tp1609936p2204672.html
Sent from the Elecraft mailing list archive at Nabble.com.
___
Elecraft mailing
After a re-check of the DVR, I am able to continuously play a loop delay
message. Not sure why it wasn't working before - it would stop after 5 or 6
cycles but appears to be fine now. I noticed that Wayne made some mention
about PC programs that were polling the radio and causing the DVR to
I've noticed the very same thing - PTT activation does not stop the DVR.
Also, when you program a loop delay time, the message will not repeat
indefinitely, it stops after 5 or 6 repetitions - seems like it should
repeat forever until you interrupt it???
--
View this message in context:
I worked 18 hours of the contest, 435 Qs, 178 mults, final score of 194,910.
The K3 performed flawlessly using it in conjunction with an Icom IC-2KL and
AT-500.
My biggest gripe is the number of long tuner-uppers on DX calling
frequencies - there's no excuse for it. If you can afford a
.
73
Mark KN7T
--
View this message in context:
http://n2.nabble.com/K3-sweepstakes-this-weekend-tp1443979p1452094.html
Sent from the Elecraft mailing list archive at Nabble.com.
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must
I've used the CW to PSK-31 function and I've had reports from others that
some of the characters being sent are chopped off and not displayed on the
receiving end ??? I have no idea what is causing that or how to fix it.
--
View this message in context:
My K3 (S/N 1371) has the same problem - glad to hear that it's a known issue
and is on the list of things to be fixed.
--
View this message in context:
http://n2.nabble.com/K3-monitor-distortion-tp833651p834301.html
Sent from the Elecraft mailing list archive at Nabble.com.
10 matches
Mail list logo