to ensure proper operation. Part of ISO
protocol.
Mel, K6KBE
--- On Tue, 9/1/09, Paul ZL3IN ps030...@varion.co.nz wrote:
From: Paul ZL3IN ps030...@varion.co.nz
Subject: Re: [Elecraft] Wrist strap / mat grounding
To: elecraft@mailman.qth.net
Date: Tuesday, September 1, 2009, 3:33 PM
When I
to cracks in the via and potential failure down
stream.
From one who is long in the tooth.
Mel, K6KBE
--- On Tue, 8/18/09, Ron D'Eau Claire r...@cobi.biz wrote:
From: Ron D'Eau Claire r...@cobi.biz
Subject: Re: [Elecraft] OT: Another quick question about solder...
To: elecraft
I like the idea of putting a heavy magnet speaker in the cabinet.
Mel, K6KBE
--- On Mon, 8/17/09, Jim Hester jimhes...@hester.ws wrote:
From: Jim Hester jimhes...@hester.ws
Subject: [Elecraft] Heavy P3
To: elecraft@mailman.qth.net
Date: Monday, August 17, 2009, 12:19 PM
To overcome
I'm a lefty, but like the display on the right. Is there an adjustable sweep
speed?? It is the only thing I don't like about the IC radios, fixed sweep
rate. When can I order one??
Mel, K6KBE
--- On Sat, 8/15/09, W6NEK w6...@socal.rr.com wrote:
From: W6NEK w6...@socal.rr.com
Subject: Re
won't have possible intermod problems in fringe high RF
enviornments of FD, but you won't lose a front end. FWTW.
Mel K6KBE
--- On Mon, 6/29/09, Bill W4ZV btipp...@alum.mit.edu wrote:
From: Bill W4ZV btipp...@alum.mit.edu
Subject: Re: [Elecraft] HI RFI Message - what to do?
To: elecraft
Me too, I use 150 lb nylon all of the time without problems.
Mel
--- On Thu, 6/18/09, DOUGLAS ZWIEBEL doug...@gmail.com wrote:
From: DOUGLAS ZWIEBEL doug...@gmail.com
Subject: [Elecraft] stealth wire ant insulators...can't resist
To: Elecraft Reflector elecraft@mailman.qth.net
Date: Thursday
An old thought. When trying to get heat out, one usually gets dirt, bugs, etc.
in. I like cranking up the AC and leave well enough alone. Of course there is
always the freon bath, not.
Mel, K6KBE
--- On Fri, 5/15/09, drewko drew...@verizon.net wrote:
From: drewko drew...@verizon.net
against the
relay resistance and size the diode accordingly. Most of the time the 1N4000
series are well suited for small relay applications. When in doubt, measure
the relay parameters..
Mel, K6KBE
--- On Wed, 4/8/09, Jack Smith jack.sm...@cliftonlaboratories.com wrote:
From: Jack Smith
.
Mel, K6KBE
--- On Mon, 3/2/09, Bob Tellefsen n...@comcast.net wrote:
From: Bob Tellefsen n...@comcast.net
Subject: Re: [Elecraft] K3 Audio out artifacts
To: m...@paxsen.com, Elecraft@mailman.qth.net
Date: Monday, March 2, 2009, 3:28 PM
Hi Scott
Out of curiousity, on the headphone output, are
you
.
Thanks
MelWE2K
Mel Snitchler
E-mail w...@binghamtonwireless.com
E-mail message checked by Spyware Doctor (6.0.0.386)
Database version: 5.11820
http://www.pctools.com/en/spyware-doctor-antivirus
After getting my SteppIR up last fall, My first DX on 40 was Italy from central
California, wonderful feeling, yes?
Mel, K6KBE
--- On Tue, 1/13/09, Ron D'Eau Claire r...@cobi.biz wrote:
From: Ron D'Eau Claire r...@cobi.biz
Subject: Re: [Elecraft] Condx
To: 'Elecraft Discussion List' elecraft
After getting my SteppIR up last fall, My first DX on 40 was Italy from central
California, wonderful feeling, yes?
Mel, K6KBE
--- On Tue, 1/13/09, Ron D'Eau Claire r...@cobi.biz wrote:
From: Ron D'Eau Claire r...@cobi.biz
Subject: Re: [Elecraft] Condx
To: 'Elecraft Discussion List' elecraft
I agree with Guy. Now on the speakers, I have found matching pair of speakers
at a swap meet that were from a computer store. Same height as the K3 on legs
and I painted them the same, or close color.
Mel
--- On Sun, 1/4/09, Bill NY9H n...@arrl.net wrote:
From: Bill NY9H n...@arrl.net
exact pressure of the right size on the hot
side of the PCB and blows hot solder out against the colder solder on the
other side and effectively cleans the hole without over heating the pad.
From someone who is long in the tooth,
Mel K6KBE
--- On Tue, 12/30/08, Don Wilhelm w3
I am in favor of using the following, When the sub receiver is installed the
default is one tap, and allow a reconfig to two tap.
Mel
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list
of the picture too.
Mel K6KBE
--- On Sun, 8/31/08, Tom Hammond [EMAIL PROTECTED] wrote:
From: Tom Hammond [EMAIL PROTECTED]
Subject: RE: [Elecraft] SB-221 for K3 need some help.
To: [EMAIL PROTECTED], 'Don Rasmussen' [EMAIL PROTECTED],
elecraft@mailman.qth.net
Date: Sunday, August 31, 2008, 10:10 AM
Hi
301 - 316 of 316 matches
Mail list logo
