Anyone have any idea what setting on either the remote rig client/server would
prevent a K3/0 from turning on the K3?
If the K3 at the remote site is turned on, then the K3/0 client will connect
just fine. The K3/0 can then turn off the K3 as well, but then is unable to
turn the K3 back on.
I currently have N1MM integrated with FLDigi, a SignalLink unit, and an RS232
interface to the K3. All works well using AFSK with the K3 in USB mode.
Can someone direct me on how to setup my K3 for FSK RTTY? Would like to know
what is needed to make the switch to FSK such that the K3 can be
All,
Apologize if this question has been asked before.
When handling pileups, I've always used the following setup and it truly works
FB - run split, lock the TX frequency, and use the main VFO to listen up/down
for stations.
Over the weekend I installed a RX only loop antenna(Pixel
All,While on a mini dx-pedition, most of the original exterior screws in my K3
developed rust after operating near salt water for 10 days. I have ordered the
stainless steel screws to replace the original exterior K3 chassis screws.
1) Should I be concerned about rust developing inside my
Can I use the P3 at the remote end? (i.e. connected to my remote rig)?
-rob N7QT
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
Thanks for the quick replies! It works -rob
Date: Sat, 28 Jan 2012 10:39:01 -0800
Subject: Re: [Elecraft] Help needed connecting Alpha 86 amp to K3
From: a...@dseven.org
To: rfanf...@hotmail.com
CC: elecraft@mailman.qth.net
On Sat, Jan 28, 2012 at 10:34 AM, Robert Fanfant rfanf
Thanks -rob
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by:
Is this a problem only on 30M?
-rob N7QT
- Original Message -
From: Ken K3IU [EMAIL PROTECTED]
To: 'Gottlieb, Jonathan' [EMAIL PROTECTED]; elecraft@mailman.qth.net
Sent: Sunday, June 12, 2005 11:29 AM
Subject: RE: [Elecraft] KPA100 Hi Current on 30M
Hi Jonathan:
You may well have
8 matches
Mail list logo