K3s 100 watt Transceiver
KAT3A Antenna Tuner
KRX3A Subreceiver
2-KFL3C 200 HZ Filter CW
2-KFL3C 400 HZ Filter CW
2-KFL3C 2.80 HZ Filter SSB
2-KFL3C 600 KHZ Filter AM
2-KFL3A 1300 KHZ Filter FM
KBPF3A Pass Band Filter
KDVR3 Digital Voice Recorder
KCTX03 High Stability Oscillator
K3s Book from Fred
The Elecraft KPA 500 and KAT 500 have been sold and shipped.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted
I have the the following Elecraft equipment for sale:
Elecraft P3 with P3TXMon and P3VGA installed with the 1,8-54
MHz Panadapter TX Sensor, cables and Manuals $810 Firm with free shipping..
Elecraft KX3 with Roofing Filter, Auto tuner, Charger/Real Time Clock, and a
MH3 microphone with a
The KX2 not transmitting problem has been solved with the great help from Doug
of Elecraft Technical support along with some backup there in Watsonville.
Another example of great support of Elecraft products. Turns out it was
several software parameters messed up in the calibration file. I
Elecraft KPA500 watt amplifier in very good physical and electrical condition
with cables and manuals, wired for 220 volt operation. $1800 Postal Money
Order. If interested, please contact off list. $1800. 73’s folks.
__
Elecraft
Selecting CW or SSB the transmitter light does not indicate transmission nor
does it transmit when microphone or paddle attempts send dits or das. Vox is
enabled but does not work. Any and all help apprecieated.
Thanks and 73’s
Ron KD7RJ
I have a pair of remote rigs which I use to remotely control a Elecraft K3S via
Elecraft K3/0 mini which I purchased from Elecraft. Everything has been
working fine until I had to reset my router, a Apple Time Capsule. Now the
remote rig just beeps at me and does not turn K3S on.
Elecraft KXPD2 Attached Precision Keyer Paddle, like new never used. $100
shipped USA, less than one year old.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
The buddipole battery and charger have been sold
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by:
KX3 for sale here prior to listing on QTH. KX3 SN 1246 includes KX3 160-6M
Transceiver, BNC Male to Stackable Binding Posts, BNC Rt. Angle M-F, KX3-PCKT
Accessory Cable Set, KXAT3 ATU, Int. NiMH Charger/CLK, KXFL Dual-Passband
Roofing Filter, KXPD3 Precision Keyer Paddle ie newer no upgrade
The KX3 that was for sale has been sold and shortly will be on it way to Texas.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
Buddipole battery and charger for sale. Will run a 100 watt radio for a period
and a KX3 all day if not days. The battery and charger were purchased in March
2013 and used about 3 times with the same amount of charges so virtually brand
new. I had it for my KX3 which I have just sold. The
Anyone having success hooking up remotely through these boxes in a hotel?
Please advise on how your doing so to get by the log in process hotels require.
73’s
Ron
__
Elecraft mailing list
Home:
The K3 I listed yesterday has been sold pending arrival of funds.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list
K3/100 K3 100W 160-6 meter transceiver, KAT3 Automatic antenna tuner, KFL3A-400
400 Hz, 8 pole filter, 2.7 kHz 5-pole filter, KXV3A, K3 RX Ant, IF Out Xvrtr
Interface, DSP upgrade board, Very good condition, S/N 27xx. This was spare
radio. $2350 shipped, Federal Express ground including
I saw spectral display Electcraft has done with KX3 using a iMic into a iPad.
Does anyone know the name of the application being used to do this? Thanks.
Sending response off list is fine. Thanks and 73’s
__
Elecraft mailing list
Ordered KAT500K Thursday, received shipping notification today Friday its
shipped. So much for the backlog. I'm sure its as nice as the other Elecraft
goodies I have. Thank You
73's Ron
kd...@comcast.net
__
Elecraft mailing list
I am looking for suggestions for various ham radio software that works good
with a Mac and success/failures others may have had. I do not want to run the
Mac in windows/corporate mode, sorry no more registry or blue screens of death
for me. I am seeking advise from other K3 owners who have
Greetings group. I have been toying with the idea of using the Remoterig setup
but it seems to me other issues need to be addressed here. I understand the
operation of the radio via Remoterig is fairly easy. What I am wondering is
has anyone had any experience using the K3 to switch antenna
Is there an update on when one could expect to get a KX3 if ordered now or
Monday since Elecraft is currently closed? Any word on when orders may be
accepted for the KAT500 and its price? Seems these dates have slipped a lot
from what I last heard while at Dayton last May. Seems I heard a
Do you just call to order or wait for a posting?
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by:
Some curious minds would like to know when Eric is gonna tell us a few things
such as when is Elecraft gonna put the RemoteRig items on the order sheet with
prices and when is the same thing gonna happen with the KAT500 besides real
soon now? Even some non curious minds would just like to know
K3/100 kit arrived, assembled now and working perfectly. Sold Orion ll and now
have 2 K3's. Looking into remoterig! Elecraft please give us some preliminary
specifications on KAT 500!
73's Ron
kd...@comcast.net
__
Elecraft
What I would really like to see and there is plenty of room inside the P3 is to
be able to add
a external sensor and electronics to display trapezoidal and other information
regarding the
transmit signal similar to what the LP 500 is proposed to do. This would be
great to have all
those
I would like to find a 8 pole filter for a K3 at a reasonable price. If you
have one to sell or trade, please contact me off list.
73's Ron
kd...@comcast.net
__
Elecraft mailing list
Home:
Fellow Elecraft K3 Owners, Wantabees, and Others.
Last year I went to Dayton where I ordered the XRX3 second receiver and some 8
pole filters so I could try diversity receive. Just around the corner or so
from them was a new vender I had never heard of called Pixel Technologies and I
spent
Will the new 900 watt amplifier require any connections to the radio other than
a coax cable and if so then is it supplied and how long will it be? I
currently use an amp that has to be keyed and am curious as my amp is not real
close to the radio and I am considering the new amp. My current
Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Ron Gould
Sent: Tuesday, December 21, 2010 7:35 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] New Elecraft Amplifier
Will the new 900 watt amplifier require any connections
I had a Panasonic Plasma TV that not only caused radio interference but also
heated up my
bedroom in a central air conditioned house so much that I could not be
comfortable especially
in the summer. I first contacted Panasonic about these problems and they were
of NO HELP.
The representative
I am going to sell my very nice K1 transceiver. It was built by a professional
engineer. It has the four band module for 40,30,20 and 15 meters, includes the
internal auto tuner and the internal battery pack, The price is $440. If
anyone is interested, please contact me off list. Thanks,
Elecraft MH2 microphone excellent condition, little use and a recent purchase.
$45.00 plus shipping. Contact off list please.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
The MH2 microphone listed earlier today has been sold to Derek Brown, WF4I
pending receipt of funds, Thanks Derek!
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Well I posted the start of the thread Ten Tec never sounded so good!
regarding how good the Ten Tec speakers sounded on my K3. I was somewhat
amazed no one got it. Lots of fine intentioned folks commented about
everything but Ten Tec speakers comparing those with lots of other ones they
have
Has anyone tried either of these products out on a K3 and care to share their
results compared to using the built in 8 band equalizer built into the K3. I
am not interested in any comments by others who have not actually tried these
out. If you would like to take this discussion off list
I have connected two Ten Tec 307B speakers to my K3 and am running it in stereo
and with AFX on. Wow a Ten Tec never sounded so good. They cost a bit but
they sure do sound good!
__
Elecraft mailing list
Home:
Heil Quiet Phone Pro headset with MB1-HC6 boom and microphone element. Comes
with red adaptor cable for Elecraft K3. $200 plus shipping.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
The Heil Quiet Pro Headset and MB1-HC6 are no longer available.
Begin forwarded message:
From: Ron Gould kd...@comcast.net
Date: April 1, 2010 8:57:09 AM PDT
To: Elecraft@mailman.qth.net
Subject: Heil Headset with boom mic for sale.
Heil Quiet Phone Pro headset with MB1-HC6 boom
I have a K3 and MH2 as well as a Quiet Phone Plus. The Quiet Phone Plus only
works from the rear but not the front. I have Heil Kenwood adaptor. The MH2
does not work either. Both cases not TX audio from front connector. No Sub
receiver installed. Serial number in the 2700's. I have
38 matches
Mail list logo