[Elecraft] K3 External Speakers

John, FWIW, my West Mountain Radio COMspkr set totally free of interference. The unit with the amp is immediately beside a 1KW amp and the antenna cables for several rigs pass within inches behind the unit(s). 73! de Ken Kopp - K0PP __

Re: [Elecraft] QRM

I hear it in SW Montana at 1305 ... about S7 73! Ken K0PP elecraftcov...@gmail.com On Wed, Dec 28, 2011 at 11:41 AM, Jim McDonald j...@n7us.net wrote: Peaking S7 on my K3 at 160 degrees from NW of Chicago at 1130Z. Cat (or brick?) on a key? 73, Jim N7US -Original Message-

[Elecraft] Our Holiday Wishes to you

Hello Elecrafters! Ken and I send our best wishes to each of you for the Christmas Holidays. 88/73! Rose - N7HKW Ken - K0PP elecraftcov...@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help

[Elecraft] K3 KPA3 power pins of SN 56

My K3 (SN 56) has the non-gold pins ... just checked them while in the process of adding the LO stiffeners ... and they are unblemished. It's had heavy contest use, too. Our Montana climate is dry ... this may be a factor. 73! Ken K0PP k...@mailman.qth.net

Re: [Elecraft] Pileup markers [ was Re: Band edge markers]

Yeah, sometimes we're like trying to herd cats ... and keep 'em quiet. (:-) 73! Ken - K0PP On Wed, Dec 7, 2011 at 10:04 PM, Eric Swartz - WA6HHQ, Elecraft e...@elecraft.com wrote: And now its time to close this thread and move back to our regular mayhem.. 73, Eric List Moderator

[Elecraft] Dust cover for the KX3

an opening in the cover for them. We'll address a potential padded case next. It's a complex issue, with many concepts of what extras might be added over and above the KX3. Stay tuned, and 73! Rose - N7HKW elecraftcov...@gmail.com

Re: [Elecraft] P3 - What am I observing?

. Ignore the Rose header ... I'm using her computer for this reply. 73! Ken - K0PP elecraftcov...@gmail.com Here's my question: What are the two spikes that I see about 500 Hz to each side of 28.130, approximately 25-30 dB down from the center's peak level (-125 to -130 dB)? These spikes

Re: [Elecraft] OT- Coax for ground wire?

Most sheet metal shops can sheer copper sheets into almost any width one would want, and the cost is reasonable. I had about half of a 4 x 8 sheet sut into 1 and 2 inch x 4 foot strips several years ago and that's used throughout my station's grounding system.

Re: [Elecraft] Regarding Heathkit

Wayne, you spin a nice yarn. Enjoyed the read. (:-)) 73! Ken Kopp - K0PP elecraftcov...@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post:

Re: [Elecraft] KE7X K3 Book 20% saving

Cover is in color ... text and inside photos are B/W 73! Ken - K0PP On Sat, Jun 25, 2011 at 8:28 AM, Bill W4ZV btipp...@alum.mit.edu wrote: Bill W4ZV wrote: Yes...B/W only. Sorry...should have said the .pdf download is B/W only...don't know about the printed version. 73, Bill

Re: [Elecraft] K2/100 75 meters lost receive

It as written as tongue-in-cheek humor, Don. I trust most realized that. ... We all realize you devote LOTS of your (unpaid) time and effort to our collective enjoyment and knowledge of Elecraft equuipment. 73! Ken - K0PP

Re: [Elecraft] KPA500 Kit

Got our kit today 14:00 MESZ from local customs. KPA500-K #79 already built and ready to accompany ZD8D-Team to Ascension Island. 73 Wolf DK1IP Member of ZD8D Am 16.06.2011 um 16:44:18 schrieb Klaus Koppendorfer: My notification was yesterday at 11.12pm also Europe :) 73 Klaus OE6KYG

[Elecraft] What is a dB worth was: Re: KX3 vs. K3 and other rigs?

There's a saying among VHF / UHF'ers in reference to coax and connector losses that every .5db counts. 73! Ken - K0PP __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help:

[Elecraft] Private Sales of used Elecraft Rigs

for Rose and she receives orders from all over the world, so I've become reasonably familiar with the procedure, but it's still a task. The average transit time seems to be from two to as much as four weeks. Israel is the exception. It can take several months for a package to be delivered

[Elecraft] Seapac

For the first time in a number of years, Rose and I won't be at Seapac. It's our favorite convention and we have many friends there that we enjoy having evening dinners with. Last year's trip cost a bit over $700 and she sold only one K3 cover, but the main reason to stay home this year

[Elecraft] XG3 / KX3 case confusion

elects to do. Thank you for your interest and suggestions. 73! Rose - N7HKW elecraftcov...@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post

[Elecraft] OT: Need English / Italian translator

in English and you translate and forward it to him. Please contact me off the reflector if you'd be able to help. 73! Rose - N7HKW elecraftcov...@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft

Re: [Elecraft] Mac Grounding

same with me, except it's a K3/100 on HF and K3/10 on UHF (through transverter TR432H). Running 750W on HF (sometimes) and up to 700W on UHF (during contests) there are absolutely no problems. Rigs are connected via an Edgeport USB - 4Serial-converter and audio in/out phono lines. 73 Wolf

Re: [Elecraft] KPA500 carrying case question

by future KPA500 purchasers. 73! Rose - N7HKW elecraftcov...@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list

[Elecraft] KPA500 carrying case question

I'm about to have foam end caps made for carrying the KPA500 amplifier in a DXpedition case, and I'd like to have some idea of how many to order. They will be identical to the K3 cases. Do you expect to purchase one? 73! Rose - N7HKW elecraftcov...@gmail.com

[Elecraft] KPA500 covers and cases

for the KPA500. 73! Rose - N7HKW elecraftcov...@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http

[Elecraft] KPA-500 dimensions

Hi Tom, The dimensions are essentially the same ... We saw the first two at Visalia last year, and will be making cases and covers for them. 73! Rose - N7HKW elecraftcov...@gmail.com http://tinyurl.com/7lm3m5 __ Elecraft

Re: [Elecraft] AF1 filter

I'll second Don's endorsement of Dave, W8FGU's enclusures for Elecraft Mini-Modules. We show some of them at Rose's booth at west coast hamfests. I have several, and they're nicely done. 73! Ken - K0PP elecraftcov...@gmail.com http://tinyurl.com/7lm3m5 On Sat, Feb 12, 2011 at 5:36 PM, Don

[Elecraft] K3 TX spurs?

I think I recall a thread about spurs being produced by a K3's TX, but didn't pay enough attention at the time. I've since become aware of a K3 that appeared to have two spurs showing up on my P3. They were about 30db down from his very strong carrier on 7031 KHZ, and equally spaced about 1

[Elecraft] Transmitting while listening in diversity mode

An IRC Model 196 is an excellent solution. I have them on my K2 and K3. I think they're available from Array Solutions. 73! Ken Kopp - K0PP elecraftcov...@gmail.com http://tinyurl.com/7lm3m5 __ Elecraft mailing list

[Elecraft] Correction: Transmitting while listening in diversity mode

The post should read ICE Model 196, not IRC ... 73! Ken Kopp - K0PP __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list

Re: [Elecraft] Activating the APF

Mark, There are -no- stupid questions. Push and Hold XFIL. You must be in CW mode. 73! Ken Kopp - K0PP elecraftcpv...@gmail.com On Thu, Dec 30, 2010 at 7:48 PM, pastor...@verizon.net wrote: I hate to ask a stupid question, but how does one activate the new APF that is available with

[Elecraft] Happy Holiday Season to all !

Ken and I wish for each of you a Happy Holiday Season. 88! de Rose - N7HKW 73! de Ken - K0PP elecraftcov...@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm

Re: [Elecraft] K3 Memory Editor

David, The 6M repeater offsets here in the US are either 1.0 or 1.6 MHZ. There are exceptions, but not many. A duplexer for only a .5 MHZ frequency separation would be difficult to build. 73! Ken Kopp - K0PP Montana VHF / UHF Frequency Coordinator elecraftcov...@gmail.com On Tue, Dec 14,

[Elecraft] Elecraft Covers has a new ISP/address

Rose has a new e-mail provider / ISP that appears to be free of the problems related to her old service, which was often black-listed or blocked by other carriers. Many messages, both to and from her, simply vanished. If you've not had a response to an inquiry, please try again. Lisa and Eric

[Elecraft] Elecraft Covers has a new address

to an inquiry, please try again. Lisa and Eric at have updated the Elecraft site to reflect the new contact information. 73! Rose - N7HKW elecraftcov...@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help

Re: [Elecraft] P3 cursors won't go up more then 200 MHz

: The span of the P3 is 200 khz. You state 200 mhz so not sure if span is what your questioning. Jim K4JAF - Original Message - From: Wolf E. Rose wolf.e.r...@freenet.de To: elecraft@mailman.qth.net Sent: Thursday, September 16, 2010 12:47 AM Subject: [Elecraft] P3 cursors

[Elecraft] P3 cursors won't go up more then 200 MHz

hi folks, just preparing everything for the IARU-region 1 UHF/SHF-contest (10/2-3). While testing I was not able to set the P3's cursors beyond 200 MHz. Anybody show me the right way to exceed this frequency limit please. I'm sure this must be a software bug between operator's ears.

<    1   2   3