[Elecraft] Re: K7C

Worked on 160 mtrs. Sloper- K2/100- 0600Z No pile-up No lids No up-police : ) 73, Tony W7GO ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.):

Re: [Elecraft] RE: K2 Balun Enclosure and drilling Altoid tins

Here is a link with a good pictorial on creating holes in an Altoids tin. I have used this method using a T-Handle reamer from Ace Hardware and it works great. http://www.radioactivehams.com/~n0rc/rm/enclosure/altoids_enclosure.html 73, Tony W7GO

Re: [Elecraft] RE: K2 Balun Enclosure and drilling Altoid tins

it off. Maybe Jay Leno would let us do an Altoids Tin Shoot-out. Eric KE6US -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Tony Morgan Sent: Tuesday, July 19, 2005 9:25 AM To: Elecraft@mailman.qth.net Subject: Re: [Elecraft] RE: K2 Balun Enclosure

[Elecraft] Resistor Color Coder

A while back there was a discussion on resistor color coding, Ran across this link. A freeware program, it's kind of neat. Win XP would not run it but it ran on my Win 98 machine. Check it out at: www.schematica.com Tony W7GO ___ Elecraft mailing

Re: [Elecraft] Resistor Color Coder

OK, Now runs on my XP machine also, just had to re-boot it. : ) Tony W7GO - Original Message - From: Tony Morgan [EMAIL PROTECTED] To: Elecraft@mailman.qth.net Sent: Tuesday, April 26, 2005 6:51 PM Subject: [Elecraft] Resistor Color Coder A while back there was a discussion

Re: [Elecraft] XG1 battery voltage(s) reference needed

Rick Commo wrote: Could someone with an XG1 please measure the battery voltage with the board switched off and then the board switched on I need a reference point since I have tried three batteries in mine and the yellow light always comes on. My batteries were anywhere from 3.05 to 3.15 no

Re: [Elecraft] XG1 battery voltage(s) reference needed

Rick Commo wrote: Could someone with an XG1 please measure the battery voltage with the board switched off and then the board switched on I need a reference point since I have tried three batteries in mine and the yellow light always comes on. My batteries were anywhere from 3.05 to 3.15 no

Re: [Elecraft] K1-4 KAT1

[EMAIL PROTECTED] wrote: I've been building this puppy for the past year or so (about on schedule, for me -- my K2 took 18 months). It's designed to put out about 35 watts, as Sandy says, and I'm planning on using it to boost my K2's output on psk31. (I'll have to run it at reduced power on

Re: [Elecraft] Info 201 again

W3FPR - Don Wilhelm wrote: Tony, The Info 201 message tells me that the K2 'thought' that everything had to be initialized. The only thing I can think of is that AUXBUS communication was/is misbehaving. I would first drag out the schematic and look at everywhere the AUXBUS signal travels

[Elecraft] Info 201 again

Hi Guys, K2 #4049 w/KPA100 + KAT100. Working without any problems for almost a year. Was running MMTTY @ 25 wts today. After returning to receive K2 locked up, no audio not able to do anything. Turned it off and back on and all was normal except could not access menu. Turned it off again and

Re: [Elecraft] K2/100 in ARRL DX Test

Steve, Glad your K2 performed well in the contest. I too was in the contest casually with my K2. Was also going to buy an Orion but opted for the KPA100 instead. We did save a few bucks didn't we! Tony W7GO - Original Message - From: Steve L. [EMAIL PROTECTED] To:

Re: [Elecraft] 2 k2

Just for the fun of building another K2. Almost as much fun as operating it! Tony W7GO ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.):

Re: [Elecraft] Trivia from G0XAR

http://www.halted.com/ Type solder pot in search. They do international shipping. Tony W7GO ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.):

Re: [Elecraft] How about a K-RCV?

Yep, Count me in! Tony W7GO ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help:

[Elecraft] XG1 help

I have a newly built XG1. Wanted to try to calibrate the s-meter on my K2. Problem is very weak output tone on 50 uv setting. Not sufficient to light s-meter. Can't hear tone at all on 1 uv setting. All resistance checks are ok on XG1, all components look to be in correct locations, soldering

[Elecraft] Re: Wire source oselectronics

Ordered various items from them. The order was shipped promptly and was complete. 72/73 Tony W7GO ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.):

[Elecraft] KX1 KXB30 Alignment

Hi Guys, Have almost completed KX1 #770. Everything is fine so far. My question is with the KXAT1 installed, how do I get to trimmer 20A on the KX1 board? In the KXB30 manual, page 7, last step it says to re-align rcvr on 20 mtrs. Thanks, Tony W7GO

Re: [Elecraft] KX1 KXB30 Alignment

] To: Tony Morgan [EMAIL PROTECTED]; #elecraft elecraft@mailman.qth.net Sent: Thursday, August 12, 2004 1:02 AM Subject: Re: [Elecraft] KX1 KXB30 Alignment Simply remove your kxat1, re-jumper pins 1 and 3 of j7 near the antenna jack, and follow the Receiver Alignment procedure outlined on p45

Re: [Elecraft] Kpa100, powerpoles and crimpers

Here is a link to some interesting info on powerpole crimping: http://www.connex-electronics.com/?url=/html/products/anderson/powerpole/pp_main.html 73, Tony W7GO ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to

<    1   2