I've been at ham since 1972. I've been on qrp since the beginning. My first
transmitter was 100 mw. My added amplifier was 200 mw. The OX2 and PAX by ICM.
Not official but by adding /QRP I was hoping the other party would try to work
me. I never looked at it as legal.
K1, KX2, K3, & K3s. Ted
Sent from my iPhone
> On Jul 18, 2017, at 7:12 AM, Don Wilhelm wrote:
>
> Tom,
>
> Have you centered the CW signal in the CWT bargraph? That is necessary - use
> auto-spot for an easy way to tune the signal to center.
> You could try narrowing the filter width to isolate that one signal.
>
Gm all
I was able to test my CW and it works (100w). Now moving to SSB.
Mic is Mh2
Set Mic to front panel , low
I turn vox on
No out put
Can anyone let me know what I'm missing. Thank you. Ted
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3S-New-out-of-box-no-ssb-outp
LCD is used in the K3, K3S, KX3 and KX2. Why yours says "I"
> while pictures show "II" is a mystery - but the KX2 that I have here on
> loan from Elecraft also shows "I".
>
> 73,
> Don W3FPR
>
> On 3/19/2017 1:59 PM, Wp4cw via Elecraft wrot
I'm a CW operator. Next to the bandpass display I see a "I" while others
pictures display a "II".
How do I toggle the setting. Ted wp4cw
--
View this message in context:
http://elecraft.365791.n2.nabble.com/KX2-Next-to-bandpass-on-the-right-hand-side-of-the-display-I-see-I-II-tp7628286.html
Sen
I've had the same issue. Window 7 uses prolific drivers. Window 10 can, but it
a big mess. Go to radio shack and buy their ftdi USB cable. Window 10 has the
drivers , no need to update. Call me 209. 601.5354
Sent from my iPhone
> On Mar 18, 2017, at 11:44 AM, Ron D'Eau Claire wrote:
>
> Same
For sale K3, factory upgrades. Nonsmoker, in excellent shape. Just returned
from the factory. Asking $2400 Shipped. WP4CW Ted CA. 95206. 209.601.5354
With upgrades rated #3 by Sherwood Engineering.
Options:
1. Roofing Filter 2.7k
2. CW Filter 500 hz
3. KPA3 100 Watts
4. KAT3 Automatic Antenna
I believe if my memory serves me right, they produce the OX-2 oscillator kit,
100 mw on CW. I also enjoyed their PAX-1, 200 mw amp. WN6EDW, Ted, Gonzales, Ca
Sent from my iPhone
> On Mar 10, 2017, at 4:07 PM, Wayne Burdick wrote:
>
> We have multiple sources for all of our crystals and filter
Filter Sold. Thank you. Ted
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-K3S-filter-for-sale-tp7627747p7627754.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home:
I have for sale a pulled INRAD 1 kHz filter. (Elecraft KFL3-1.0 kHz, 8 pole)
I would like $115 shipped. Ted Wp4cw Stockton CA
Contact me off line. WP4CW at aol dot com
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-K3S-filter-for-sale-tp7627747.html
Sent from the
.
73,
Don W3FPR
On 3/5/2017 11:18 PM, Wp4cw via Elecraft wrote:
> No didn't work. When I hold tune , vfo b displays text test.
>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: h
dummy load a good one for up to 54MHz?
>
> Often the TX Gain Calibration will fail when operated from K3Utility,
> but will pass if done manually on each band. See the K3S manual page 52.
>
> 73,
> Don W3FPR
>
> On 3/5/2017 10:03 PM, Wp4cw via Elecraft wrote:
>
ached?
> Is the dummy load a good one for up to 54MHz?
>
> Often the TX Gain Calibration will fail when operated from K3Utility,
> but will pass if done manually on each band. See the K3S manual page 52.
>
> 73,
> Don W3FPR
>
> On 3/5/2017 10:03 PM, Wp4cw via Ele
TX Gain Calibration requires that your k3 be in "TX NORM" for Calibration.
5 Watt Calibration failed.
Help. How do I fix this? Ted. wp...@aol.com 209.601.5354. Ted
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3S-won-t-low-power-5-watts-calibration-error-tp7627641.h
Hello Wayne
I'm I a happy camper. I received my KX2, put it on 20m CW. I made a 6500 mile
contact to Argentina. Good Job on your product KX2. Ted WP4CW
Sent from my iPhone
> On Nov 11, 2016, at 8:26 AM, Wayne Burdick wrote:
>
> Working all kinds of DX on both bands.
>
> Have fun!
>
> Wayne
I have a K1, two band unit, built this year by Alan Price and aligned by Don
Wilhelm. Used on less that 20 qso's. All options included. Spent $600 in
parts plus the cost to build it. Can email or text images. Make offer off
line.
Ted, Stockton, CA.
wp...@aol.com
209-601-5354. Upgrading.
--
Vie
Just got my K3 from the factory. A factory reset was done. It transmits on
CW, but not on SSB. I thought there was a setting. Can anyone help? Ted
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-SSB-Transmit-tp7615155.html
Sent from the Elecraft mailing list archive at
Bert Rollen wrote:
>Thanks David,
>
>I do not need 27 Mhz, (just need lower end of 26 Mhz) so hopefully all would
>work fine.
>
>In fact, I do not need the PA enabled at all.
>
>I will drop Elecraft a note soon. (I do, BTW, have the KBPF3.)
>
>One question perhaps may still be answered here; w
Looking for KTS1 bracket. Contact off line. 209.601.5354
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Wanted-K1-kTS1-bracket-tp7613866.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraf
Looking for KTS1 bracket. Ted. Contact me off line.Wp4cw at aol dot com
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Wanted-K1-kTS1-bracket-tp7612233.html
Sent from the Elecraft mailing list archive at Nabble.com.
20 matches
Mail list logo