I recently experienced a hard drive meltdown, and seem to have lost the
Spectrogram freeware version I had downloaded from another ham's web site that
I learned about on this reflector.
Could someone please let me know what that link is.
Thanks,
Gary, N0AGH
Thanks. I went to Tom's web site and got it.
-Gary
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
Mostly everything works fine, but...
1) Still appears to be a problem with the AGC/S-meter calibration because the
S-meter is continuously pegged on rightmost LED.
The RF Gain control appears to have no effect although I've confirmed that R4
(front panel RF Gain control) seems to function
In running the final Resistance Checks on p. 71 of the K2 manual, I only get
1.7 ohms at the Q7 collector. The manual says I should get 500 ohms. When I
study the schematic, I can't see where the 500 ohms is supposed to come from
since Q3 is connected across Q7 and Q8 collectors and the 12V
I meant T3, not Q3.
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
I'm not sure whether this is a problem or not but after performing the S-meter
alignment on p. 47 of the K2 assembly manaual, the tenth bargraph LED stays
lit. It is lit whenever I turn on the rig. The AGC threshold is 3.80 Vdc at U2
pin5. I have completed Alignment and Test II with no problems
(Originally sent without a Subject)
I'm not sure whether this is a problem or not but after performing the S-meter
alignment on p. 47 of the K2 assembly manaual, the tenth bargraph LED stays
lit. It is lit whenever I turn on the rig. The AGC threshold is 3.80 Vdc at U2
pin5. I have completed
7 matches
Mail list logo