It looks like the fiber optic cable from Corning has 28AWG wires end to end!
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of Wes
Sent: Monday, August 17, 2020 8:12 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Lightning protection.
I took a quick look
I use CWT to ensure that I do NOT zero beat the caller. I want my signal to
be at a tone noticeably above or below that of everyone else (very important
to QRP op in a pileup). I haven't tried to quantify the hz/bar, I simply
tune to around 5 ticks away and it seems to work well.
Ken ke4rg
House is 4 feet underground, reinforced concrete, passive solar, South side
glass. TG for cellular over WIFI! All other RF via coax only.
Ken ke4rg
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Used lithium of various chemistry since they first appeared in RC market.
Universal recommendation for long term storage is 80%. Otherwise, charge &
discharge to recommended hi/low voltage by chemistry. Maximize the life of
multi-cell packs with balanced charge.Ken ke4rgSent from my Sprint
I've spent hours playing with Pixies. Good choice only if keying is cleaned
up.
Ken ke4rg
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of Jeff Kabel
Sent: Thursday, October 17, 2019 7:08 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] Looking for volunteer to
I have one and enjoy it. I does make the KX3 with rollover handles,
heatsink, and cover 1/3 taller and heavy - about 3 lbs. 12 oz. The battery
box has a second coaxial jack to power accessories. It has a balancing
charger connection for use with a RC airplane/car/boat charger. I have an
AC/DC
k'
> Cc: 'Elecraft Reflector'
> Subject: Re: [Elecraft] Cammo KX2? (Was: Copy cat - no way) "Flat Dark
> Earth"
> is all the rage for hand guns these days.Lyn, W0LEN-Original
> Message-
> From: elecraft-boun...@mailman.qth.net[mailto:elecraft-
> boun...@mail
Desert tan with high contrast black labels
Ken ke4rg
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of Wayne Burdick
Sent: Tuesday, September 3, 2019 9:26 PM
To: Mike Morrow
Cc: Elecraft Reflector
Subject: [Elecraft] Cammo KX2? (Was: Copy cat - no way)
> Mike
... it does set the bar for the KX4.
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of Wes
Sent: Monday, September 2, 2019 10:06 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] It's no KX4 but...
Makes me think they are busting butts to finish K4 design and
"good hike away ... from home conveniences (... restrooms ..
Kitchen ...)"
Rather ambiguous. So, if you can't shout at wife to bring you a beer, it's far
enough? My living room fits that description. I'm on 80 acres, and since my
hiking days are over, I have several favorite spots to which I
To me MFJ is the Harbor Freight of ham radio. When you can't afford the very
best, when you use the gear within (perhaps limited) spec and with a little
TLC, it allows you to scratch an itch you could not otherwise afford. I am glad
they're there. I love Elecraft and will fill my needs there
Dial was for receiver, transmitter rock bound until you added optional VFO.
Oh, girls did love VFOs. Especially those whose giga hertz .
Ken ke4rg
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of WW3S
Sent: Friday, January 25, 2019 7:13 PM
To: Hisashi T Fujinaka
DIY 2x 3x 4x 18650 Battery Holder Storage Box Case With DC Power Plug
5.5x2.1mm
eBay $1.76 free shipping
Charge your own 18650 and drop into holder.
Ken ke4rg
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of John Harper
Sent: Monday, November 19, 2018 9:23 AM
To:
IMHO, use 3S1P pack, 12.6/11.1 fully charged/nominal. The 4S1P pack
16.8/14.4 - voltage is too high.
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of Mike Short
Sent: Monday, November 19, 2018 8:05 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] KX2 battery
There are many inexpensive chargers available for the 3S1P battery pack
(12.6v charged, 11.1v nominal. The pack has charge controller PCB to prevent
over charge or under discharge. It does NOT provide the connector for
balancing the cells. I bet you have one of the 12.6V Li-ion chargers there
Deal killer.
Ken ke4rg
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of Ken G Kopp
Sent: Friday, November 9, 2018 6:42 PM
To: Mike - W5JR ; Elecraft
Subject: Re: [Elecraft] FS: KPA500/KAT500 Combo
Hi Mike!
Rose (elecraftcov...@gmail.com) ran into one of these
Curious, mine powers up VOX ON. Not sure what i did. I do have a function key
defined to toggle VOX making it easy turn off xmit for use as CPO.Ken ke4rg
Sent from my Samsung Galaxy smartphone.
Original message From: allen Montoye
Date: 9/19/18 6:53 PM (GMT-05:00) To:
I must admit that my K1 is still my favorite. It was my first CW only, QRP rig.
I will log more with the KX2, but every contact with the K1 is still
thrilling.Ken ke4rg
Sent from my Samsung Galaxy smartphone.
Original message From: Joan via Elecraft
Date: 7/13/18 8:43 PM
It's called the KX2.
Sent from my Samsung Galaxy smartphone.
Original message From: R Date:
7/13/18 7:44 PM (GMT-05:00) To: elecraft@mailman.qth.net Subject: [Elecraft]
KX1 Replacement?
Is there any chance that Elecraft will come up with something to replace the
KX1? I am
We engineered electronics packages for these types of environment, from
desert to arctic. Keys for success:
1- Inside of housing must be designed to route any condensation away from
the electronics. Design ENCOURAGES condensation on normally cooler
enclosure surfaces, not the electronics.
2- A
FD was a hoot from the farm here in southside Virginia. The KX2, an Alpha
Delta dipole, and N1MM+ on a $99 Kodak laptop performed flawlessly. The most
amazing thing was 10m! Since I embarked on my QRP CW adventure 4 years ago I
had logged not a single 10m contact. This weekend I bagged 26 Qs
Mine is in the mail. $12.70 shipped via 3D Hubs.
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of Johan Ymerson
Sent: Friday, March 9, 2018 3:54 AM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] 3D-print case for KXPD2
On
I replaced the cap with a screw-in cleanout. I have two caps, one with Schrader
valve for compressed air operation, the other drilled to accept grill lighter
for hair spray (classic potato gun) operation.Ken ke4rgPS: Don't forget to
leave valve open for potato gun operation!
Sent from my
I use ammo cans for tools, first aid kits, emergency car kits, radios, and even
ammo. To create faraday cage, In the past i have replaced the rubber gasket in
some with half inch ground strap. Probably not worth the effort (removing that
paint is difficult). The simple ground strap between top
TNX, nice to know!
Sent from my Samsung Galaxy smartphone.
Original message From: James Bennett Date:
7/21/17 12:23 PM (GMT-05:00) To: Detrick Merz Cc:
Elecraft Reflector Reflector Subject: Re: [Elecraft]
OT:
I agree Kev. My bienno has powerpole for load, coaxial for charge (12.6 vdc). I
don't think the coaxial should/could be used for load.Ken ke4rg
Sent from my Samsung Galaxy smartphone.
Original message From: Kevin der Kinderen
Date: 7/21/17 2:31 PM
26 matches
Mail list logo