---
From: Steve Kavanagh
To: ,
Subject: Re: [Elecraft] [K2] Sensitivity Spec
Message-ID: <1122135791.3077810.1502906517...@mail.yahoo.com>
Content-Type: text/plain; charset=UTF-8
Thanks for your comments, Don. When you test K2's, can I assume you
have
have to delve deeper.
73,
Steve VE3SMA
On Tue, 8/15/17, Don Wilhelm wrote:
Subject: Re: [Elecraft] [K2] Sensitivity Spec
To: "Steve Kavanagh" , elecraft@mailman.qth.net
Received: Tuesday, August 15, 2017, 8:29 PM
Steve,
Typically, the receiver is limited by the noise
Steve,
Typically, the receiver is limited by the noise floor, so the MDS will
not change much whether the preamp is on or off. While the preamp will
increase the strength of the signals, it also adds to the noise floor.
Generally a transverter will have a low noise preamp with plenty of
gai
I'm just trying to evaluate if I have the gain distribution right for a K2 used
as an IF for a 10 GHz transverter, through a 2 m transverter mounted inside the
QRP top. The K2 manual gives a specification for the MDS but fails to define
the bandwidth at which it is measured. Sherwood's receive
4 matches
Mail list logo
