Hi,
The other day I was tuning up on 20M (14.220Mhz thereabouts) and noticed my
SWR on the K3 was at 5.3. When I put up the antenna, it was tuned to a less
than 2.0 SWR. Accounting for wear and tear over time I thought it might have
slipped a little, so I re-tuned the antenna back to 2.0 SWR.
Grr...
I completely disassembled the antenna, cleaned and re-aligned/re-tuned it on
all bands. I'm getting 1.5 on 20M now and 1.2 to 2.8 on the rest. The K3 ATU
will match down to 5.2 on 20M now. Unless I figure out why this is, I'll
have to go back to my manual tuner and SWR analyzer, not a
Ok everybody.
I am an official nominee for Lid of the Year award on this one. Let this
post stand as a lesson to others...
With this K3 ATU (as good as it is) you cannot get a 1:1 match to air.
Apparently the best I'll ever get is 5.2 and that might be with the high
humidity.
I apparently had
4Z5TO wrote:
Grr...
I completely disassembled the antenna, cleaned and re-aligned/re-tuned it on
all bands. I'm getting 1.5 on 20M now and 1.2 to 2.8 on the rest. The K3 ATU
will match down to 5.2 on 20M now. Unless I figure out why this is, I'll
have to go back to my manual tuner and
Yes, that is what basically happened, These are the types of things that
happen when you've been playing with tube based gear your whole life then
you find yourself with one of these Duck Dodgers in the 24½th Century
devices.
4Z5TO wrote:
Grr...
I completely disassembled the antenna,
It's always confusing when a piece of equipment makes changes trying to
anticipate what we might want but usually don't.
As one of the most sage, wise men of the list (Don W3FPR) often observes, I
hate 'magic buttons'.
Welcome to our club...
Ron AC7AC
6 matches
Mail list logo