nt: Monday, February 17, 2014 11:03:32 AM
Subject: Re: [Elecraft] [K3] 12v outlet only puting out 11 volts
The P3 should work fine with 11V. When I tested mine it worked down to
about 6V or so, although that is not guaranteed.
It is normal for the K3 power connector to show a voltage drop compared
K2 6299 had the aux power out mod installed on the factory supplied card.
Cheers - Bill, AE6JV
On 2/17/14 at 11:26 AM, ai...@comcast.net (mike) wrote:
> I will check and see if the 12v upgrade was ever done
> when I get the rig open again. I would have thought the newer K3 would have
> received
Thanks for the replies. I have gone ahead and connected the P3/VGA to my 12v
distribution panel. I plan on installing the 2 meter module in the K3 later
this week or next. I will check and see if the 12v upgrade was ever done
when I get the rig open again. I would have thought the newer K3 would ha
He's got the SVGA board in the P3. If he hasn't done the higher current mod to
the K3 to get enough current out of that jack to run the P3 and SVGA, chances
are it will trip the auto resetting fuse in the K3. I didn't do the mod to
mine when I got the SVGA board, I just connected the P3 direct
The P3 should work fine with 11V. When I tested mine it worked down to
about 6V or so, although that is not guaranteed.
It is normal for the K3 power connector to show a voltage drop compared
to the 12V input connector, although 1.5V drop seems kind of high.
Could some of that drop be in the
Unable to run P3/VGA from K3 12v output for K3 serial number #5981. Only
seeing 11 volts when the K3 sees 12.5 volts.
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-12v-outlet-only-puting-out-11-volts-tp7584345.html
Sent from the Elecraft mailing list archive at Nabbl
6 matches
Mail list logo
